Celkem 2295 produktů
1/72 F4F-4 Wildcat Dinghy Set for Airfix. This set is designed to be used with the Airfix model and offers an open dorsal compartment with the inflatable dinghy. The installation to the model is easy and straightforward and the set provides eye catching extra detail to your model. Operators: USA/WWII
1/72 F4F-4 Wildcat Dinghy Set for Airfix. This set is designed to be used with the Airfix model and offers an open dorsal compartment with the inflatable dinghy. The installation to the model is easy and straightforward and the set provides eye catching extra detail to your model. Operators: USA/WWII
Impulse power adapter integrated with PoE injector (passive, not IEEE 802.3af compliant). For suppling boards like RouterBoard RB4111, G-board and other board with passive POE Specification: * output voltage 12V * max output current 1500mA * connector RJ45 LAN - to plug to local network/computer * connector RJ45 PoE: - to plug device/board * standard plug to 230V euro wall sockets.
Impulse power adapter integrated with PoE injector (passive, not IEEE 802.3af compliant). For suppling boards like RouterBoard RB4111, G-board and other board with passive POE Specification: * output voltage 12V * max output current 1500mA * connector RJ45 LAN - to plug to local network/computer * connector RJ45 PoE: - to plug device/board * standard plug to 230V euro wall sockets.
1/35 British Infantry In Combat Circa 2010-2016 Set 1. This is an injection-plastic figure set for use with military dioramas or individual display. From Gecko Models comes this 1/35 scale British Infantry In Combat Circa 2010-2016, which comes with parts to build these 4 figures. Paint and cement not included.
1/35 British Infantry In Combat Circa 2010-2016 Set 1. This is an injection-plastic figure set for use with military dioramas or individual display. From Gecko Models comes this 1/35 scale British Infantry In Combat Circa 2010-2016, which comes with parts to build these 4 figures. Paint and cement not included.
1/48 N1K2-J Shiden Kai (George) - Cockpit set . Finely detailed interior set tailored to fit the new Hasegawa’s rendition (with recessed panel lines) of the George, arguably the very best fighter plane of the Japanese Navy in WW2. The set contains also a pre-painted fret with the instrument panel and seat belts. Country of origin: Japan / WWII
1/48 N1K2-J Shiden Kai (George) - Cockpit set . Finely detailed interior set tailored to fit the new Hasegawa’s rendition (with recessed panel lines) of the George, arguably the very best fighter plane of the Japanese Navy in WW2. The set contains also a pre-painted fret with the instrument panel and seat belts. Country of origin: Japan / WWII
1/35 Sd.Kfz. 173 Pz.Jg. Jagdpanther. The Panzerjäger Panther Sd.Kfz. 173, or Jagdpanther, was a heavy tank destroyer based on the chassis of the Panzer V Panther and was armed with the same long-barreled 8.8 cm gun as the Tiger II or ‘King Tiger’, and a single 7.92 mm MG-34 machine gun in the front glacis plate for local defense. The Jagdpanther had a good power-to-weight ratio and a powerful main gun, which enabled it to destroy any Allied tank. Based on the existing Panther chassis, the vehicle did not suffer too many mechanical problems, and had an upgraded transmission and final drive to counter the Panther's main weakness. The Jagdpanther was powered by the 700hp Maybach HL230 P30 V-12 petrol engine and a 7 speed forward, 1-speed reverse transmission system with a maximum speed of 46 km/h (28.6 mph) and a range of about 200 kilometers (99 miles). It was manned by a crew of five: a driver, radio-operator, commander, gunner and a loader. Two main variants can be distinguished, the earlier (1944 model) G1 with a small internally-bolted main gun mantlet and a modified Panther A engine deck, and the later (1945 model) G2 with a larger, externally-bolted mantlet and a modified Panther G engine deck, though late G1s also had a larger mantlet. Early Jagdpanthers had two vision openings for the driver, whereas late versions had only one. The main gun originally had a monobloc gun barrel, but later versions were equipped with the PaK 43/4 gun with a two-part barrel. Early G1s (to September 1944) were given a distinctive pattern of Zimmerit anti-magnetic mine coating.
1/35 Sd.Kfz. 173 Pz.Jg. Jagdpanther. The Panzerjäger Panther Sd.Kfz. 173, or Jagdpanther, was a heavy tank destroyer based on the chassis of the Panzer V Panther and was armed with the same long-barreled 8.8 cm gun as the Tiger II or ‘King Tiger’, and a single 7.92 mm MG-34 machine gun in the front glacis plate for local defense. The Jagdpanther had a good power-to-weight ratio and a powerful main gun, which enabled it to destroy any Allied tank. Based on the existing Panther chassis, the vehicle did not suffer too many mechanical problems, and had an upgraded transmission and final drive to counter the Panther's main weakness. The Jagdpanther was powered by the 700hp Maybach HL230 P30 V-12 petrol engine and a 7 speed forward, 1-speed reverse transmission system with a maximum speed of 46 km/h (28.6 mph) and a range of about 200 kilometers (99 miles). It was manned by a crew of five: a driver, radio-operator, commander, gunner and a loader. Two main variants can be distinguished, the earlier (1944 model) G1 with a small internally-bolted main gun mantlet and a modified Panther A engine deck, and the later (1945 model) G2 with a larger, externally-bolted mantlet and a modified Panther G engine deck, though late G1s also had a larger mantlet. Early Jagdpanthers had two vision openings for the driver, whereas late versions had only one. The main gun originally had a monobloc gun barrel, but later versions were equipped with the PaK 43/4 gun with a two-part barrel. Early G1s (to September 1944) were given a distinctive pattern of Zimmerit anti-magnetic mine coating.