1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings

1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale   - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company   INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using  very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines.  After glued and shaped, paint with matt varnish.

1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings

1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale   - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company   INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using  very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines.  After glued and shaped, paint with matt varnish.

1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings

1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company   INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using  very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines.  After glued and shaped, paint with matt varnish.

1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings

1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale   - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company   INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using  very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines.  After glued and shaped, paint with matt varnish.

1/48 Messerschmitt Bf 109G-6 - Microplastic Seat Belts - pre-cut (laser)

1/48 Messerschmitt Bf 109G-6 - Microplastic Seat Belts - pre-cut (laser). Seat belts, suitable for plastic scale aircrafts, are made from micro-plastic foil. In combination with attached photo etched buckles this accesorry looks highly realistic. These are available in 1/48 scale and for more comfortable work they are pre-cut. contains highly detailed micro-plastic and photo-etched partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-plastic material which credibly simulates textilebelts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparationsphoto-etched parts are developed in cooperation with Hauler company

1/48 Messerschmitt Bf 109G-6 - Microplastic Seat Belts - pre-cut (laser)

1/48 Messerschmitt Bf 109G-6 - Microplastic Seat Belts - pre-cut (laser). Seat belts, suitable for plastic scale aircrafts, are made from micro-plastic foil. In combination with attached photo etched buckles this accesorry looks highly realistic. These are available in 1/48 scale and for more comfortable work they are pre-cut. contains highly detailed micro-plastic and photo-etched partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-plastic material which credibly simulates textilebelts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparationsphoto-etched parts are developed in cooperation with Hauler company

1/35 Lanchester Russian Service

1/35 Lanchester Russian Service. Plastic kit of a well known Lanchester Armoured car used in Russia, that was equipped with 37mm Hotchkiss gun Additional plastic parts for "Russian Service" version Cartograf printed decals Transparent parts for headlights Instruction in colour

1/35 Lanchester Russian Service

1/35 Lanchester Russian Service. Plastic kit of a well known Lanchester Armoured car used in Russia, that was equipped with 37mm Hotchkiss gun Additional plastic parts for "Russian Service" version Cartograf printed decals Transparent parts for headlights Instruction in colour

Tamiya Metal Primer Spray for Undercoating Metal Parts - 100 ml

Tamiya Metal Primer Spray for Undercoating Metal Parts - 100 ml. Aluminum, photo-etched, die cast and pressed metal parts increase the realism and strength of plastic models. This clear spray primer for treating metallic parts does not damage plastic, and applied as an undercoat, it will prevent paint from peeling off of metal parts.contents: 100ml.

Tamiya Metal Primer Spray for Undercoating Metal Parts - 100 ml

Tamiya Metal Primer Spray for Undercoating Metal Parts - 100 ml. Aluminum, photo-etched, die cast and pressed metal parts increase the realism and strength of plastic models. This clear spray primer for treating metallic parts does not damage plastic, and applied as an undercoat, it will prevent paint from peeling off of metal parts.contents: 100ml.

Příslušenství Zebra ET5X HANDLE STRAP SG-ET5X-HNDSTP-01

Handle strap provides ease of carrying the tablet with plastic grips

Příslušenství Zebra ET5X HANDLE STRAP SG-ET5X-HNDSTP-01

Handle strap provides ease of carrying the tablet with plastic grips

1/32 Nieuport XXIII Belgium, Russia

1/32 Nieuport XXIII Belgium, Russia. Was largely the same as the definitive XVII, differing mainly in the use of a different machine gun synchronizer. Nieuport XXIIIs were operated by both French and British squadrons alongside Nieuport XVIIs until their replacement by Nieuport 24s. CSM  1/32 plastic injection kit -5 plastic frets -Instruction in colour -Film for windscreen -PhotoEtch -Decals for 4 markings printed by Cartograf

1/32 Nieuport XXIII Belgium, Russia

1/32 Nieuport XXIII Belgium, Russia. Was largely the same as the definitive XVII, differing mainly in the use of a different machine gun synchronizer. Nieuport XXIIIs were operated by both French and British squadrons alongside Nieuport XVIIs until their replacement by Nieuport 24s. CSM  1/32 plastic injection kit -5 plastic frets -Instruction in colour -Film for windscreen -PhotoEtch -Decals for 4 markings printed by Cartograf

1/72 Firebee BQM-34 with transpoprt cart

1/72 Firebee BQM-34 with transpoprt cart. PLASTIC MOULDED KITS with transpoprt cart

1/72 Firebee BQM-34 with transpoprt cart

1/72 Firebee BQM-34 with transpoprt cart. PLASTIC MOULDED KITS with transpoprt cart

1/32 Nieuport XXI Russian Service

1/32 Nieuport XXI Russian Service. A french fighter, While it had a similar airframe to the Nieuport XVII, it was equipped with a less powerful Le Rhone 9C engine as it was originally intended as a long range escort fighter. It was also license manufactured in Russia by Dux Factory. CSM  1/32 plastic injection kit -6 plastic frets -Instruction in colour -Film for windscreen -PhotoEtch -Decals for 4 markings printed by Cartograf

1/35 ROC TIFV CM-33 Clouded Leopard Pre-Serial Production

1/35 ROC TIFV CM-33 Clouded Leopard Pre-Serial Production. AFV Club brings us their ROC TIFV CM-33 Clouded Leopard Pre-Serial Production plastic model kit. It's molded in a forest green and features both precise photo-etched parts and plastic injection molding tires. The steering is adjustable and the weapon station can rotate a full 360 degrees. All doors open and close. Camaflouge masking tape is included.

1/35 ROC TIFV CM-33 Clouded Leopard Pre-Serial Production

1/35 ROC TIFV CM-33 Clouded Leopard Pre-Serial Production. AFV Club brings us their ROC TIFV CM-33 Clouded Leopard Pre-Serial Production plastic model kit. It's molded in a forest green and features both precise photo-etched parts and plastic injection molding tires. The steering is adjustable and the weapon station can rotate a full 360 degrees. All doors open and close. Camaflouge masking tape is included.

1/32 Nieuport XXI Russian Service

1/32 Nieuport XXI Russian Service. A french fighter, While it had a similar airframe to the Nieuport XVII, it was equipped with a less powerful Le Rhone 9C engine as it was originally intended as a long range escort fighter. It was also license manufactured in Russia by Dux Factory. CSM  1/32 plastic injection kit -6 plastic frets -Instruction in colour -Film for windscreen -PhotoEtch -Decals for 4 markings printed by Cartograf

1/48 P-51D Overtrees

1/48 P-51D Overtrees. Kit contains only plastic sprues. This kit doesn't contain decals and instruction sheet.

1/48 MiG-21 BIS OVERTREES

1/48 MiG-21 BIS OVERTREES. Kit contains only plastic sprues. This kit doesn't contain decals and instruction sheet.

1/35 British Main Battle Tank Challenger 2 TES

1/35 British Main Battle Tank Challenger 2 TES. This is an injection-plastic military vehicle model kit.

1/48 MiG-21 BIS OVERTREES

1/48 MiG-21 BIS OVERTREES. Kit contains only plastic sprues. This kit doesn't contain decals and instruction sheet.

1/35 British Main Battle Tank Challenger 2 TES

1/35 British Main Battle Tank Challenger 2 TES. This is an injection-plastic military vehicle model kit.

1/72 Firebee BQM-34

1/72 Firebee BQM-34. PLASTIC MOULDED KITS inclusive of racks for A/B-26 Invader, P2V Neptune and C-130 Hercules

1/72 Firebee BQM-34

1/72 Firebee BQM-34. PLASTIC MOULDED KITS inclusive of racks for A/B-26 Invader, P2V Neptune and C-130 Hercules

1/48 P-51D VLR drop fuel tanks OVERTREES

1/48 P-51D VLR drop fuel tanks OVERTREES. Kit contains only plastic sprues. This kit doesn't contain decals and instruction sheet.

1/72 TYPE 2,5-32 WEHRMACHT, LIGHT TRUCK 1,5T AFRICA WITH CARGO

1/72 TYPE 2,5-32 WEHRMACHT, LIGHT TRUCK 1,5T AFRICA WITH CARGO. This is an injection-plastic military vehicle model kit.

1/48 P-51D VLR drop fuel tanks OVERTREES

1/48 P-51D VLR drop fuel tanks OVERTREES. Kit contains only plastic sprues. This kit doesn't contain decals and instruction sheet.

Auto Ambulance

Model záchranky s kovovou kabinou udělá radost velkým i malým dětem jako super hračka.Délka cca 7 cmMateriál - kov a plastSběratelská edice modelů MotorMax Die-Cast Metal Plastic

1/35 WWII British MG Team in March

1/35 WWII British MG Team in March. 105 grey coloured parts on 11 sprues; one PE fret; one plastic tube; one decal sheet.

1/35 WWII British MG Team in March

1/35 WWII British MG Team in March. 105 grey coloured parts on 11 sprues; one PE fret; one plastic tube; one decal sheet.

Pracovní stroje Vysokozdvižný vůz

Model nakládacího stroje s kovovou kabinou udělá radost velkým i malým dětem jako super hračka.Délka cca 7 cmMateriál - kov a plastSběratelská edice modelů MotorMax Die-Cast Metal Plastic

Auto Hasiči s vodním dělem

Model hasičského auta se stříkačkou a s kovovou kabinou udělá radost velkým i malým dětem jako super hračka.Délka cca 8 cmMateriál - kov a plastSběratelská edice modelů MotorMax Die-Cast Metal Plastic

Pracovní stroje Nakladač

Model pracovního auta s radlicí a s kovovou kabinou udělá radost velkým i malým dětem jako super hračka.Délka cca 7 cmMateriál - kov a plastSběratelská edice modelů MotorMax Die-Cast Metal Plastic

Pracovní stroje Buldozer

Model pracovního auta s radlicí a s kovovou kabinou udělá radost velkým i malým dětem jako super hračka.Délka cca 7 cmMateriál - kov a plastSběratelská edice modelů MotorMax Die-Cast Metal Plastic

1/35 Lanchester Armoured Car

1/35 Lanchester Armoured Car. Plastic kit of a well known Lancherster Armoured car The Lanchester 4x2 was the second most numerous armoured car in service during WWI

1/35 Lanchester Armoured Car

1/35 Lanchester Armoured Car. Plastic kit of a well known Lancherster Armoured car The Lanchester 4x2 was the second most numerous armoured car in service during WWI

Kamion M02 19cm

Model nákladního auta kamionu s kovovou kabinou a plastovým návěsem udělá radost nejen dětem jako super hračka, ale i dospělým a sběratelům jako originální kousek. Délka cca 19cm Sběratelská edice modelů MotorMax Die-Cast Metal Plastic

Kamion Heat Wave Radio 19cm

Model nákladního auta kamionu s kovovou kabinou a plastovým návěsem udělá radost nejen dětem jako super hračka, ale i dospělým a sběratelům jako originální kousek. Délka cca 19cm Sběratelská edice modelů MotorMax Die-Cast Metal Plastic

1/48 MiG-21MF

1/48 MiG-21MF. Reedition of Eduard's successful scale kit of MiG-21MF in 48th scale. (first release March 2011)plastic parts: EduardNo. of decal options: 6Decals: EduardPE parts: yes, colorpainting mask: yes

1/48 MiG-21MF

1/48 MiG-21MF. Reedition of Eduard's successful scale kit of MiG-21MF in 48th scale. (first release March 2011)plastic parts: EduardNo. of decal options: 6Decals: EduardPE parts: yes, colorpainting mask: yes

Star Micronics TSP143IV UE WT E+U Béžová, USB, LAN, řezačka, 4 roky záruka 39473190

Nová termální tiskárna Star Micronics TSP143IV v béžovém provedení s řezačkou a USB + LAN portem spadá pod tiskárny řady TSP100, které se vyznačují úsporou energie a redukcí tisku. Tiskárna oproti předešlým řadám vyniká novým designem a vylepšenou konektivitou. Tento model ušetří 20 % místa oproti tiskárně TSP143III a může tisknout jak v horizontální, tak i vertikální poloze. Hlavní přednosti Termální tiskárna včetně řezačky a USB + LAN portu Ideální pro úsporu energie a redukci tisku Vylepšená konektivita Vhodná pro využívání v obchodech, restauracích a podobných podnicích Technologie Star CloudPRNT pro tisk přímo z webových aplikací Vyvinuto pro tablety a cloudové POS TSP143IV nabízí vylepšenou konektivitu s Ethernet LAN a porty USB-C pro zařízení se systémem Windows, Linux a MacOS a také USB-A pro připojení tabletů a mobilních zařízení Android. S technologií pro snadný tisk Technologie Star CloudPRNT je také vhodná pro tisk přímo z webových aplikací, ideální pro maloobchodní objednávky Click & Collect nebo objednávky z restaurací přímo do kuchyně bez potřeby tabletu nebo POS systému. Součástí jsou také cloudové služby Star Micronics nabízející monitorování zařízení a mnoho dalších služeb. Praktické používání a šetření energie Kotoučky z papíru s průměrem 83 mm namontujete na stěnu nebo do svislé polohy se softwarem, který automaticky obrací účtenky pro snadné přečtení. Její funkce, jako automatické zmenšení tisku, zkrácení přebytečných okrajů, emulace sériového portu a další, z ní dělají jednu z nejkomplexnějších tiskáren ve své třídě. Pokročilý mód tiskárny navíc zaručuje úsporu energie až o 75 % oproti standardním tiskárnám STAR. Kompatibilní téměř se všemi systémy Je určena pro všechny standardní operační systémy. Ovladače pro Windows, OPOS Driver, JavaPOS Drivers (Windows/Mac/Linux), CUPS Drivers (Mac/Linux), StarXpand SDK (React Native, iOS, Android). Součástí balení je také nástroj pro zmenšení účtu z 80 na 58 mm. Specifikace Značka: Star Micronics Model: TSP143IV Určení: termální tiskárna na tisk účtů Parametry Interní napájení: napájecí šňůrou Délka napájecího kabelu: 1,8 m Interní napájecí zdroj Průměr role: 83 mm Emulace: Grafický mód, Režim Star, ESC/POS Ovladače pro většinu operačních systémů: OPOS Driver, JavaPOS Drivers (Windows/Mac/Linux), CUPS Drivers (Mac/Linux), StarXpand SDK (React Native, iOS, Android) Software s přidanou hodnotou prodejce pro : OEM, tvůrce systémů, softwarové vývojáře Obsluha: úsporná svislá nebo vodorovná Všechny funkce tiskárny dostupné ze stránky: Vlastnosti tiskárny v systému Windows (Star Quick Set-Up Utility pro iOS, Star Quick Set-Up Utility pro Android, Star Windows Software, Star CloudPRNT SDK, StarXpand SDK pro oReact Native, Star Cloud Services) Záruka na TSP100IV: plná záruka na 2 roky + 2 roky na náhradní díly (záruka se nevztahuje na běžné opotřebení) Obsah balení Tiskárna Star Micronics TSP143IV UE WT E+U Béžová, USB, LAN, řezačka Vodítko papíru 58 mm Kabel USB (USB-C na USB-A), kabel Ethernet LAN Napájecí kabel (1,8 m)

Star Micronics TSP143IV UE WT E+U Béžová, USB, LAN, řezačka, 4 roky záruka 39473190

Nová termální tiskárna Star Micronics TSP143IV v béžovém provedení s řezačkou a USB + LAN portem spadá pod tiskárny řady TSP100, které se vyznačují úsporou energie a redukcí tisku. Tiskárna oproti předešlým řadám vyniká novým designem a vylepšenou konektivitou. Tento model ušetří 20 % místa oproti tiskárně TSP143III a může tisknout jak v horizontální, tak i vertikální poloze. Hlavní přednosti Termální tiskárna včetně řezačky a USB + LAN portu Ideální pro úsporu energie a redukci tisku Vylepšená konektivita Vhodná pro využívání v obchodech, restauracích a podobných podnicích Technologie Star CloudPRNT pro tisk přímo z webových aplikací Vyvinuto pro tablety a cloudové POS TSP143IV nabízí vylepšenou konektivitu s Ethernet LAN a porty USB-C pro zařízení se systémem Windows, Linux a MacOS a také USB-A pro připojení tabletů a mobilních zařízení Android. S technologií pro snadný tisk Technologie Star CloudPRNT je také vhodná pro tisk přímo z webových aplikací, ideální pro maloobchodní objednávky Click & Collect nebo objednávky z restaurací přímo do kuchyně bez potřeby tabletu nebo POS systému. Součástí jsou také cloudové služby Star Micronics nabízející monitorování zařízení a mnoho dalších služeb. Praktické používání a šetření energie Kotoučky z papíru s průměrem 83 mm namontujete na stěnu nebo do svislé polohy se softwarem, který automaticky obrací účtenky pro snadné přečtení. Její funkce, jako automatické zmenšení tisku, zkrácení přebytečných okrajů, emulace sériového portu a další, z ní dělají jednu z nejkomplexnějších tiskáren ve své třídě. Pokročilý mód tiskárny navíc zaručuje úsporu energie až o 75 % oproti standardním tiskárnám STAR. Kompatibilní téměř se všemi systémy Je určena pro všechny standardní operační systémy. Ovladače pro Windows, OPOS Driver, JavaPOS Drivers (Windows/Mac/Linux), CUPS Drivers (Mac/Linux), StarXpand SDK (React Native, iOS, Android). Součástí balení je také nástroj pro zmenšení účtu z 80 na 58 mm. Specifikace Značka: Star Micronics Model: TSP143IV Určení: termální tiskárna na tisk účtů Parametry Interní napájení: napájecí šňůrou Délka napájecího kabelu: 1,8 m Interní napájecí zdroj Průměr role: 83 mm Emulace: Grafický mód, Režim Star, ESC/POS Ovladače pro většinu operačních systémů: OPOS Driver, JavaPOS Drivers (Windows/Mac/Linux), CUPS Drivers (Mac/Linux), StarXpand SDK (React Native, iOS, Android) Software s přidanou hodnotou prodejce pro : OEM, tvůrce systémů, softwarové vývojáře Obsluha: úsporná svislá nebo vodorovná Všechny funkce tiskárny dostupné ze stránky: Vlastnosti tiskárny v systému Windows (Star Quick Set-Up Utility pro iOS, Star Quick Set-Up Utility pro Android, Star Windows Software, Star CloudPRNT SDK, StarXpand SDK pro oReact Native, Star Cloud Services) Záruka na TSP100IV: plná záruka na 2 roky + 2 roky na náhradní díly (záruka se nevztahuje na běžné opotřebení) Obsah balení Tiskárna Star Micronics TSP143IV UE WT E+U Béžová, USB, LAN, řezačka Vodítko papíru 58 mm Kabel USB (USB-C na USB-A), kabel Ethernet LAN Napájecí kabel (1,8 m)

1/35 Rheintochter R-1 on Panther 2 chassis

1/35 Rheintochter R-1 on Panther 2 chassis. Injection mold plastic kit for a Panther 2 chassis with rocketlauncher Rheintochter R-1.- including PE parts and workable single track links- scale 1:35- not built/painted

1/35 Rheintochter R-1 on Panther 2 chassis

1/35 Rheintochter R-1 on Panther 2 chassis. Injection mold plastic kit for a Panther 2 chassis with rocketlauncher Rheintochter R-1.- including PE parts and workable single track links- scale 1:35- not built/painted

1/72 Object 279 + Object 279M + NBC Soldie

1/72 Object 279 + Object 279M + NBC Soldie. Plastic model kit forObject 279M + NBC Soldier + Object 279- 3 markings- inkl. figure- two tanks include Object 279M and Object 279- scale 1:72unbuilt unpainted

1/72 Object 279 + Object 279M + NBC Soldie

1/72 Object 279 + Object 279M + NBC Soldie. Plastic model kit forObject 279M + NBC Soldier + Object 279- 3 markings- inkl. figure- two tanks include Object 279M and Object 279- scale 1:72unbuilt unpainted

1/48 J2M3 Raiden (Jack) seat with seatbelts

1/48 J2M3 Raiden (Jack) seat with seatbelts. Finely detailed pilot’s seat with in-situ moulded belts directly replaces the plastic item in any kit of this Japanese fighter aeroplane. Country of origin: Japan / WWII

1/48 J2M3 Raiden (Jack) seat with seatbelts

1/48 J2M3 Raiden (Jack) seat with seatbelts. Finely detailed pilot’s seat with in-situ moulded belts directly replaces the plastic item in any kit of this Japanese fighter aeroplane. Country of origin: Japan / WWII