Celkem 3126 produktů
1/32 Gotha UWD. Highly detailed plastic Model kit with PE parts to build a planeScale 1:32not built/painted The unique Gotha UWD was one of several different twin engine seaplanes ordered by the German Navy to fit their requirements for a long range reconnaissance and torpedo carrying aircraft (although there is no evidence to suggest it was ever armed with a torpedo). The Gotha UWD was developed from the G.1 land plane and was completed in December 1915. It was described as easy to fly, able to take to the air with ease and was smooth on landing. In a preview of things to come, Gotha UWD 120 was used to bomb England during early 1916. -274 high-quality injection moulded plastic parts. -4 photo-etched metal detail parts. -2x Daimler-Mercedes 160hp D.III engines. -63cm wingspan. -10kg Carbonit bombs & bomb dropping ‘proboscis’, counter rotating propellers and optional map & document case and camera. -24 page fully illustrated instruction manual. -High quality Cartograf decals for Gotha UWD 120 which served with See Flieger Abteilung 1 in 1916
Chytrý monitor kvality ovzduší Levenhuk Wezzer Air Pro DM20 ohlídá koncentraci CO2 ve vaší bezprostřední blízkosti, ať už půjde o domácnost, kancelář či jakýkoliv jiný vnitřní prostor. Lze vzdáleně řídit pomocí připojení Wi-Fi a mobilní aplikace Smart Life/Tuya Smart, díky čemuž bude provoz intuitivní a zvládne jej skutečně každý bez rozdílu. Přístroj mění barvy podsvícení podle kvality ovzduší – zelená značí výborné hodnoty, žlutá představuje situaci na pomezí a červená znamená kritický stav. Jakmile se tak stane, měřidlo vás ještě upozorní zvukovým signálem, abyste mohli včas podniknout příslušná protiopatření. Hlavní přednosti Měřící přístroj monitoruje koncentraci CO2 v daném prostředí Zvukový signál a změna barvy podsvícení podle kvality ovzduší Zelená značí výborné hodnoty, červená znamená kritický stav S vyšší kvalitou ovzduší roste vaše psychická i fyzická pohoda Wi-Fi modul a podpora mobilní aplikace Smart Life/Tuya Smart 800mAh Li-Ion akumulátor zajistí provoz bez otravné kabeláže Proč je důležitá kvalita ovzduší? Oxid uhličitý ve vysokých koncentracích negativně ovlivňuje naši psychickou i fyzickou pohodu, neboť může vést ke vzniku takzvaného vydýchaného vzduchu. V takovémto prostředí se cítíte letargičtí, hůře se soustředíte a rovněž vás mohou trápit silné migrény, bolesti hlavy a další neduhy. Pokud se situace dlouhodobě vymyká kontrole, můžete pociťovat také příznaky chronického únavového syndromu či další závažné zdravotní komplikace. Přístroj Levenhuk Wezzer Air PRO DM20 přesně měří hladinu CO2, na kterou můžete reagovat častějším větráním či zapnutím čističky vzduchu, díky čemuž budete více svěží v průběhu celého dne. Upozornění: k nabíjení měřícího přístroje je nutný síťový adaptér, který není součástí této dodávky. Specifikace Značka: Levenhuk Řada: Wezzer Air Model: Pro DM20 Part Number: 81407 Určení: měřidlo Monitoring: kvalita ovzduší Měření CO2: 400 až 5000 md Doporučené prostředí: interiér Provedení: stolní, digitální, bezdrátový Management Vzdálená správa: chytrá aplikace Mobilní aplikace Smart Life/Tuya Smart Podporovaný mobilní OS: Android, iOS Baterie a napájení Technologie baterie: Li-Ion Jmenovité napětí: 5 V Kapacita baterie: 800 mAh Konektor pro nabíjení: microUSB Fyzické vlastnosti Materiál: vysokopevnostní ABS plast Barevné provedení: bílá a transparentní Čistá hmotnost: 250 g Hmotnost balení: 280 g Rozměry balení (Š x V x H): 9,3 x 10,6 x 9,3 cm Obsah balení 1x měřidlo Pro DM20 1x kabel microUSB 1x záruční list 1x uživatelský návod
Chytrý monitor kvality ovzduší Levenhuk Wezzer Air Pro DM20 ohlídá koncentraci CO2 ve vaší bezprostřední blízkosti, ať už půjde o domácnost, kancelář či jakýkoliv jiný vnitřní prostor. Lze vzdáleně řídit pomocí připojení Wi-Fi a mobilní aplikace Smart Life/Tuya Smart, díky čemuž bude provoz intuitivní a zvládne jej skutečně každý bez rozdílu. Přístroj mění barvy podsvícení podle kvality ovzduší – zelená značí výborné hodnoty, žlutá představuje situaci na pomezí a červená znamená kritický stav. Jakmile se tak stane, měřidlo vás ještě upozorní zvukovým signálem, abyste mohli včas podniknout příslušná protiopatření. Hlavní přednosti Měřící přístroj monitoruje koncentraci CO2 v daném prostředí Zvukový signál a změna barvy podsvícení podle kvality ovzduší Zelená značí výborné hodnoty, červená znamená kritický stav S vyšší kvalitou ovzduší roste vaše psychická i fyzická pohoda Wi-Fi modul a podpora mobilní aplikace Smart Life/Tuya Smart 800mAh Li-Ion akumulátor zajistí provoz bez otravné kabeláže Proč je důležitá kvalita ovzduší? Oxid uhličitý ve vysokých koncentracích negativně ovlivňuje naši psychickou i fyzickou pohodu, neboť může vést ke vzniku takzvaného vydýchaného vzduchu. V takovémto prostředí se cítíte letargičtí, hůře se soustředíte a rovněž vás mohou trápit silné migrény, bolesti hlavy a další neduhy. Pokud se situace dlouhodobě vymyká kontrole, můžete pociťovat také příznaky chronického únavového syndromu či další závažné zdravotní komplikace. Přístroj Levenhuk Wezzer Air PRO DM20 přesně měří hladinu CO2, na kterou můžete reagovat častějším větráním či zapnutím čističky vzduchu, díky čemuž budete více svěží v průběhu celého dne. Upozornění: k nabíjení měřícího přístroje je nutný síťový adaptér, který není součástí této dodávky. Specifikace Značka: Levenhuk Řada: Wezzer Air Model: Pro DM20 Part Number: 81407 Určení: měřidlo Monitoring: kvalita ovzduší Měření CO2: 400 až 5000 md Doporučené prostředí: interiér Provedení: stolní, digitální, bezdrátový Management Vzdálená správa: chytrá aplikace Mobilní aplikace Smart Life/Tuya Smart Podporovaný mobilní OS: Android, iOS Baterie a napájení Technologie baterie: Li-Ion Jmenovité napětí: 5 V Kapacita baterie: 800 mAh Konektor pro nabíjení: microUSB Fyzické vlastnosti Materiál: vysokopevnostní ABS plast Barevné provedení: bílá a transparentní Čistá hmotnost: 250 g Hmotnost balení: 280 g Rozměry balení (Š x V x H): 9,3 x 10,6 x 9,3 cm Obsah balení 1x měřidlo Pro DM20 1x kabel microUSB 1x záruční list 1x uživatelský návod
1/35 SHERMAN M4A3E8 with workable Track links. This is an injection-plastic military vehicle model kit. Rye Field Model presents a 1/35 scale kit of the U.S. main battle tank: M1A2 SEP V2 Abrams! This 3-in-1 kit allows you to select which specs you'd like to build your tank with from three possible types. It features link and length style tracks, and comes with 755 parts, 65 photo-etched parts, and decals for multiple marking options. Grab it today! [Mold Color]: Tan [Includes]: Photo-etched parts, decals
1/35 SHERMAN M4A3E8 with workable Track links. This is an injection-plastic military vehicle model kit. Rye Field Model presents a 1/35 scale kit of the U.S. main battle tank: M1A2 SEP V2 Abrams! This 3-in-1 kit allows you to select which specs you'd like to build your tank with from three possible types. It features link and length style tracks, and comes with 755 parts, 65 photo-etched parts, and decals for multiple marking options. Grab it today! [Mold Color]: Tan [Includes]: Photo-etched parts, decals
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/35 2CM SALVENMASCHINENKANONE SMK 18 TYPE 2. This is an injection-plastic field gun model kit. The SMK18 Type 2 2-cm cannon is a high-fidelity gun made by Germany during World War II. The idea was to shoot down enemy aircraft by simultaneously firing eight 2-cm cannons. The Type 1 had the cannons in a horizontal arrangement; the prototype of the Type 2 was built in 1939, but it proved to be too unstable for use, as there was too much of a load on its moving parts. This gun is currently on display in a museum in Moscow, Russia. This kit features highly detailed breech and carriage assemblies, working elevation and sight mechanisms, and a choice of optical or iron sights. The stabilizer arms are movable, and a set of photo-etched parts is included as well. Order yours today! [Includes]: Photo-etched parts
Plastikový model letadla 1/72 Potez 25 TOE - 'For France - any time, any where'. The Potez 25 biplanes enjoyed long and faithful service with the French military, it lasted from the 1920s until the end of WW2. The TOE version of the biplane was primarily destined to fly in the France’s overseas colonies. The kit offers four interesting and colourful scheme options, a Vichy machine boasting distinctive red-yellow stripes which saw service in French Indochina in 1942, a pre-war airframe with white stripes on its top wing, an Aeronavale machine which was operated over mainland France in 1940 and finally a Free French Potez as used in Syria in 1944. highly accurate and nicely detailed model four machines illustrating the type’s long service for France meticulously designed decal sheet photo-etched parts are included too Operators: France/pre WWII-WWII
1/35 2CM SALVENMASCHINENKANONE SMK 18 TYPE 2. This is an injection-plastic field gun model kit. The SMK18 Type 2 2-cm cannon is a high-fidelity gun made by Germany during World War II. The idea was to shoot down enemy aircraft by simultaneously firing eight 2-cm cannons. The Type 1 had the cannons in a horizontal arrangement; the prototype of the Type 2 was built in 1939, but it proved to be too unstable for use, as there was too much of a load on its moving parts. This gun is currently on display in a museum in Moscow, Russia. This kit features highly detailed breech and carriage assemblies, working elevation and sight mechanisms, and a choice of optical or iron sights. The stabilizer arms are movable, and a set of photo-etched parts is included as well. Order yours today! [Includes]: Photo-etched parts
Plastikový model letadla 1/72 Potez 25 TOE - 'For France - any time, any where'. The Potez 25 biplanes enjoyed long and faithful service with the French military, it lasted from the 1920s until the end of WW2. The TOE version of the biplane was primarily destined to fly in the France’s overseas colonies. The kit offers four interesting and colourful scheme options, a Vichy machine boasting distinctive red-yellow stripes which saw service in French Indochina in 1942, a pre-war airframe with white stripes on its top wing, an Aeronavale machine which was operated over mainland France in 1940 and finally a Free French Potez as used in Syria in 1944. highly accurate and nicely detailed model four machines illustrating the type’s long service for France meticulously designed decal sheet photo-etched parts are included too Operators: France/pre WWII-WWII
1/32 P-47D Thunderbolt - Super Riveting Set - Riveting Sets - Hasegawa. Package contents:1x P-47D - Riveting Set 1/32 - 3210221x P-47D Thunderbolt - Stencils + Placard - 1/32 - 2320291x P-47D Thunderbolt - Seatbelts 1/32 - 1325321x P-47D Thunderbolt - Masks 1/32 - 632420 Instructions:Convenient undercoat is Mr. Surfacer 1000 or Mr. Base White 1000.*Wipe the surface with a damp cloth, remove dust and grease.Cut the required part from riveting sheet.Remove top translucent paper and dip rivets in the warm water for approx. 15 seconds.When rivets are separated from its carrier paper apply them on the surface. We recommend to use a spot of Mr. Mark Softer.Find appropriate position and then push the liquid from below the transfer. The purpose is to get each rivet in touch with the surface.Let it dry for min. 2 hours, but optimal time could be e.g. over the night.Finally pull of the top transparent foil / film with sharp tweezers and clean the marks caused by transfer glue.* While application on coloured surfaces it is needed to make a test of adhesion and of time which is necessary for appropriate attaching of rivets. Generally the smoother surface the more time needed.
1/32 P-47D Thunderbolt - Super Riveting Set - Riveting Sets - Hasegawa. Package contents:1x P-47D - Riveting Set 1/32 - 3210221x P-47D Thunderbolt - Stencils + Placard - 1/32 - 2320291x P-47D Thunderbolt - Seatbelts 1/32 - 1325321x P-47D Thunderbolt - Masks 1/32 - 632420 Instructions:Convenient undercoat is Mr. Surfacer 1000 or Mr. Base White 1000.*Wipe the surface with a damp cloth, remove dust and grease.Cut the required part from riveting sheet.Remove top translucent paper and dip rivets in the warm water for approx. 15 seconds.When rivets are separated from its carrier paper apply them on the surface. We recommend to use a spot of Mr. Mark Softer.Find appropriate position and then push the liquid from below the transfer. The purpose is to get each rivet in touch with the surface.Let it dry for min. 2 hours, but optimal time could be e.g. over the night.Finally pull of the top transparent foil / film with sharp tweezers and clean the marks caused by transfer glue.* While application on coloured surfaces it is needed to make a test of adhesion and of time which is necessary for appropriate attaching of rivets. Generally the smoother surface the more time needed.
Duke Hawkins: MiG-31 Foxhound (108 pages) EN. Our newest book in the Duke Hawkins series is the first to give you a close-up look at the Mikoyan MiG-31 Foxhound, the fastest operational jet in the world, capable of flying at speeds of up to 3.000 km/h! This 50 ton intercepter was photographed in detail from every possible angle, in action on the ground ànd in the air! Never before seen details are included in this 108 page book, containing some 250 high resolution photographs of Foxhounds from Russia and Kazakhstan. This book includes detailed photos of long range R-33 and mid-range R-40 missiles. The MiG-31 is used in some of the most extreme conditions. We even show you action of the interceptor operating over the North Pole. Fast, rugged, robust, operational in every imaginable weather condition. This book includes some of the most fantastic photos of Kirill Mushak, who lives near one of the airbases from which the MiG-31 Foxhound operates. Never before seen details of the air intake, exhausts, landing gear, vertical tails, wings, speed brakes and much more. Not only does this book offer you photos of the landing gear, but also of the wheel bays and the fuselage missile rails. The typical cockpit of the Foxhound is included in great detail. Both the B version and the modernised MiG-31 BM are included! And so much action!!
Nabíječka baterií ToolKitRC M8P s výkonem 600 W a schopností vyváženého nabíjení baterií od napětí 1s do 8s Mimořádně výkonný: Nabíjecí výkon 0,1-20A @ 600W. Univerzální: Podporuje různé typy baterií: LiPo, LiHV, LiFe, Lion, LTO, NiMh a Pb. Vybaveno balančním proudem 1000 mA @ 4,2 V pro rychlejší a bezpečnější nabíjení. Smart: Měří vše od PWM, PPM až po SBUS a IR. Je to jako mít mini laboratoř! Praktické: Dodává se s živým 2,4 IPS RGB LCD displejem 320 × 240 pixelů, díky kterému je uživatelské rozhraní hračkou. Specifikace: Vstupní napětí 7-35V: @MAX25A Typ baterie: LiPo LiHV LiFe Lion LTO @ 1-8S NiMh @ 1-20S Pb @ 1-10S Nabíjecí výkon: 0,1-20A@600W Vybíjecí výkon: 0,1-20A @ 600W Recyklace externí Vybíjecí výkon: 0,1-3A @ 20W Normální režim Balanční proud: 1000mA@4,2V USB: 5,0 V @ 2,1 A upgrade Měření PWM: 880us-2200us @20-400Hz PPM: 880us-2200us*8Ch @20-50hz SBUS: 880us-2200us*16ch @ 20-100Hz Napětí: 1,0V-5,0V @1-8S IR: 1-99 mR @ 1-8S ESC: 1-20A@1-35V MAX600W Výstup PWM: 500us-2500us @20-1000Hz PPM: 880us-2200us*8ch @ 50Hz SBUS: 880us-2200us*16ch @ 74Hz Napájení: 1-20A @ 1-35V Režim: CC+CV LCD displej: 2,4 IPS RGB 320×240 pixelů Manuál zde Obsah balení: 1x nabíječ ToolkitRC M8P
1/48 Siebel Si 204/Aero C-3 Wheels . Main undercarriage wheels and the tailwheel finely cast in resin bring much higher levels of detail to the genuine star of our 2019 range, the 1/48 Siebel Si 204D. Can be used with the upcoming Czech and French versions of the Siebel as well. Country of origin: Germany / WWII
1/48 Siebel Si 204/Aero C-3 Wheels . Main undercarriage wheels and the tailwheel finely cast in resin bring much higher levels of detail to the genuine star of our 2019 range, the 1/48 Siebel Si 204D. Can be used with the upcoming Czech and French versions of the Siebel as well. Country of origin: Germany / WWII
1/48 SAAB B17B - The first SAAB aircraft. The first SAAB designed and built aircraft was initially an ASJA (SAAB’s predecessor) project called the L-10, a reconnaissance aircraft. When ASJA was merged with SAAB, the airplane was named SAAB 17. It was now also intended as a dive bomber. As the European continent was thrown into war, the lack of engines forced three different versions of the SAAB 17 to be developed; the 17A with Pratt & Whitney Twin Wasp, the 17B with Bristol Mercury XXIV and the 17C with Piaggio P. XIbis R.C.40D. The first prototype flew on May 18 1940 and two years later deliveries commenced.
1/35 Sturmtiger Rm61 L/5.4/38cm W/Workable Track Links. This is an injection-plastic military vehicle model kit. The Sturmtiger was a self-propelled artillery developed by Germany in World War II. This tank remodeled the chassis of the Tiger I, and it was equipped with a 38cm rocket mortar originally developed for the German Navy. Only 18 of this tank were produced. Interior parts are limited to parts inside the battle room; parts such as the engine, radiator fan, and transmission are not included. The track links are movable, and photo-etched parts are included, as are decals for 3 markings versions. [Includes]: Photo-etched parts, decals for 3 versions
1/48 Saab SB17B floats. The first SAAB designed and built aircraft was initially an ASJA (SAAB’s predecessor) project called the L-10, a reconnaissance aircraft. When ASJA was merged with SAAB, the airplane was named SAAB 17. It was now also intended as a dive bomber. As the European continent was thrown into war, the lack of engines forced three different versions of the SAAB 17 to be developed; the 17A with Pratt & Whitney Twin Wasp, the 17B with Bristol Mercury XXIV and the 17C with Piaggio P. XIbis R.C.40D. The first prototype flew on May 18 1940 and two years later deliveries commenced.
1/48 SAAB B17B - The first SAAB aircraft. The first SAAB designed and built aircraft was initially an ASJA (SAAB’s predecessor) project called the L-10, a reconnaissance aircraft. When ASJA was merged with SAAB, the airplane was named SAAB 17. It was now also intended as a dive bomber. As the European continent was thrown into war, the lack of engines forced three different versions of the SAAB 17 to be developed; the 17A with Pratt & Whitney Twin Wasp, the 17B with Bristol Mercury XXIV and the 17C with Piaggio P. XIbis R.C.40D. The first prototype flew on May 18 1940 and two years later deliveries commenced.
1/35 Sturmtiger Rm61 L/5.4/38cm W/Workable Track Links. This is an injection-plastic military vehicle model kit. The Sturmtiger was a self-propelled artillery developed by Germany in World War II. This tank remodeled the chassis of the Tiger I, and it was equipped with a 38cm rocket mortar originally developed for the German Navy. Only 18 of this tank were produced. Interior parts are limited to parts inside the battle room; parts such as the engine, radiator fan, and transmission are not included. The track links are movable, and photo-etched parts are included, as are decals for 3 markings versions. [Includes]: Photo-etched parts, decals for 3 versions
1/35 German Kugelpanzer (2 Kits Pack). marking for 4 versions without figures 1:35 scale not built / painted The Kugelpanzer a one-man tank built by Krupp in Germany than exported to Japan and used by the Kwantung Army. It was captured by the Soviets in Manchuria and is on display in the Kubinka Tank Museum. There is no record of it ever having been used in combat.
1/35 German Kugelpanzer (2 Kits Pack). marking for 4 versions without figures 1:35 scale not built / painted The Kugelpanzer a one-man tank built by Krupp in Germany than exported to Japan and used by the Kwantung Army. It was captured by the Soviets in Manchuria and is on display in the Kubinka Tank Museum. There is no record of it ever having been used in combat.
