Celkem 6479 produktů
Plastikový model letadla 1/32 Fieseler Fi 103 / V-1. A model of the German unmanned missile, the infamous V-1 flying bomb which was designed and used for terror bombing of London and the UK. When the Allies invaded France, the missiles were also aimed at Antwerp, Liege and Brussels, both from land-based launch sites and aircraft. The kit contains three grey styrene sprues, a decal sheet and full colour instruction leaflet. The decals cater for three machines wearing different styles of camouflage schemes. detailed and extremely accurate model never kitted before in this scale contains not just the missile, but its handling trolley too the camouflage options show different types of colour schemes worn accurate decals with stencils
Plastikový model letadla 1/32 Fieseler Fi 103 / V-1. A model of the German unmanned missile, the infamous V-1 flying bomb which was designed and used for terror bombing of London and the UK. When the Allies invaded France, the missiles were also aimed at Antwerp, Liege and Brussels, both from land-based launch sites and aircraft. The kit contains three grey styrene sprues, a decal sheet and full colour instruction leaflet. The decals cater for three machines wearing different styles of camouflage schemes. detailed and extremely accurate model never kitted before in this scale contains not just the missile, but its handling trolley too the camouflage options show different types of colour schemes worn accurate decals with stencils
1/72 Blackburn Firebrand TF.Mk.5. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.5. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.IV. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. The Firebrand TF Mk.IV featured a 2,520bhp Centaurus IX or Centaurus 57 engine. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.IV. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. The Firebrand TF Mk.IV featured a 2,520bhp Centaurus IX or Centaurus 57 engine. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/35 Panzerkampfwagen 38(t) Ausf.E/F. This is an injection-plastic military vehicle model kit. From Tamiya: After the effective annexation of Czechoslovakia by Nazi Germany in 1939, German forces were interested enough in the native Czech LTvz38 light tank that they took it on and ordered production under their own categorization of 38(t), a light tank with riveted, welded armor and a perky 3.7cm gun. Early production 38(t)s took part in the early German offensives of the war, and the 38(t) underwent continued development with 1,400 produced in total. Ausf.E and F 38(t)s had additional armor across the vehicle for better survivability and were deployed during the early stages of Operation Barbarossa as Nazi Germany once again invaded a neighbor, this time the Soviet Union. About the Model Length: 132mm, width: 62mm The 38(t) form with riveted armor plate is accurately depicted. Parts are included to recreate fender-top stowage boxes that were often added by units on the front line. Assembly type tracks feature single-piece straight sections for fine reproduction of upper run 'sag.' Engine grille mesh is rendered faithfully using a photo-etched component. Comes with a commander figure for installation in the hatch, and two Eastern Front marking options.
1/35 Panzerkampfwagen 38(t) Ausf.E/F. This is an injection-plastic military vehicle model kit. From Tamiya: After the effective annexation of Czechoslovakia by Nazi Germany in 1939, German forces were interested enough in the native Czech LTvz38 light tank that they took it on and ordered production under their own categorization of 38(t), a light tank with riveted, welded armor and a perky 3.7cm gun. Early production 38(t)s took part in the early German offensives of the war, and the 38(t) underwent continued development with 1,400 produced in total. Ausf.E and F 38(t)s had additional armor across the vehicle for better survivability and were deployed during the early stages of Operation Barbarossa as Nazi Germany once again invaded a neighbor, this time the Soviet Union. About the Model Length: 132mm, width: 62mm The 38(t) form with riveted armor plate is accurately depicted. Parts are included to recreate fender-top stowage boxes that were often added by units on the front line. Assembly type tracks feature single-piece straight sections for fine reproduction of upper run 'sag.' Engine grille mesh is rendered faithfully using a photo-etched component. Comes with a commander figure for installation in the hatch, and two Eastern Front marking options.
Tamiya Paint Retarder (Lacquer). This retarder is perfect for use when brush-painting lacquer paints. It slows the drying process, helping eliminate surface imperfections from brush bristles, giving a smooth and lustrous finish. Can be used up to a ratio of 1:10 (retarder:paint) when mixing. Contents: 40ml.
Tamiya Paint Retarder (Lacquer). This retarder is perfect for use when brush-painting lacquer paints. It slows the drying process, helping eliminate surface imperfections from brush bristles, giving a smooth and lustrous finish. Can be used up to a ratio of 1:10 (retarder:paint) when mixing. Contents: 40ml.
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
Impulse power adapter integrated with PoE injector (passive, not IEEE 802.3af compliant). For suppling boards like RouterBoard RB4111, RB433 any many more. Specification: * output voltage 24V * max output current 750mA * connector RJ45 LAN - to plug to local network/computer * connector RJ45 PoE: - to plug device/board * standard plug to 230V euro wall sockets.
Plastikový model letadla 1/48 Reggiane Re 2000 I. Serie. Just before the outbreak of WW2, the Reggiane Re 2000 took part in the competition for the standard fighter which was to serve with the Italian air force. Even though the type offered quite high performance, it eventually did not win, so the most of the production was offered for export. The Regia Aeronautica, however, decided to give the type a try and deployed it mainly in the dangerous operations against Malta. The model kit contains four styrene sprues and one with clear parts. The wing sprue has its origins in the Classic Airframes kit while all the other components are brand new, the small ones being produced from metal moulds. Italian WW2 fighter aeroplane three eye-catching marking options bearing the Italian mottle camouflage pattern we also offer separate resin sets and pre-cut masks
Plastikový model letadla 1/48 Reggiane Re 2000 I. Serie. Just before the outbreak of WW2, the Reggiane Re 2000 took part in the competition for the standard fighter which was to serve with the Italian air force. Even though the type offered quite high performance, it eventually did not win, so the most of the production was offered for export. The Regia Aeronautica, however, decided to give the type a try and deployed it mainly in the dangerous operations against Malta. The model kit contains four styrene sprues and one with clear parts. The wing sprue has its origins in the Classic Airframes kit while all the other components are brand new, the small ones being produced from metal moulds. Italian WW2 fighter aeroplane three eye-catching marking options bearing the Italian mottle camouflage pattern we also offer separate resin sets and pre-cut masks
Impulse power adapter integrated with PoE injector (passive, not IEEE 802.3af compliant). For suppling boards like RouterBoard RB4111, G-board and other board with passive POE Specification: * output voltage 12V * max output current 1500mA * connector RJ45 LAN - to plug to local network/computer * connector RJ45 PoE: - to plug device/board * standard plug to 230V euro wall sockets.
Impulse power adapter integrated with PoE injector (passive, not IEEE 802.3af compliant). For suppling boards like RouterBoard RB4111, G-board and other board with passive POE Specification: * output voltage 12V * max output current 1500mA * connector RJ45 LAN - to plug to local network/computer * connector RJ45 PoE: - to plug device/board * standard plug to 230V euro wall sockets.
Díky modulární architektuře Alixu lze tento kousek hardware použít na více než 50 různých aplikacích v oblasti zabudovaných zařízení, jak širokopásmový management, tak bezpečnostní aplikace (firewall) a routování. Desky mohou být též osazeny v multimediálních aplikacích stejně dobře jako na bezdrátových bodech nebo VPN bránách. Všechny modely Alix jsou kompatibilní s operačním systémem Mikrotik. Specifikace: CPU: 500 MHz AMD Geode LX800 DRAM: 256 MB DDR DRAM Storage: CompactFlash socket, 44 pin IDE header Power: DC jack or passive POE, min. 7V to max. 20V Three front panel LEDs, pushbutton Expansion: 1 miniPCI slot, LPC bus Connectivity: 3 Ethernet channels (Via VT6105M 10/100) I/O: DB9 serial port, dual USB port Board size: 6 x 6" (152.4 x 152.4 mm) - same as WRAP.1E Firmware: tinyBIOS Změny oproti ALIX.2C Increase USB current limit. USB headers as build option. USB ports 3 and 4 on header (not tested). Change optional serial header J12 to COM2. Add LED and switch pins to I2C header. Populate buzzer driver circuit, add pins for use as GPIO. Add option for power in header J18. Some enhancements to reduce EMI. Add second POSCAP to ruggedize 3.3V rail for high power radio cards. Parametry: Fyzické charakteristiky Provozní teplota: 0 až 50 °C Hloubka: 153 mm Šířka: 153 mm Výška: 20 mm Hardware RAM: 256 MB CPU: AMD Geode LX800 Frekvence CPU: 500 MHz Konektory a rozhraní Počet portů USB 2.0: 2 Sériový port: RS232 Rychlosti LAN: (3) 10/100Mbps Počet miniPCI slotů: 1 Ostatní: LPC port Napájení Napájení přes PoE: 7 .. 20V DC Typy PoE: Ano Napájení přes konektor/svorkovnici: 7 .. 20V DC
1/35 British Infantry In Combat Circa 2010-2016 Set 1. This is an injection-plastic figure set for use with military dioramas or individual display. From Gecko Models comes this 1/35 scale British Infantry In Combat Circa 2010-2016, which comes with parts to build these 4 figures. Paint and cement not included.
1/35 British Infantry In Combat Circa 2010-2016 Set 1. This is an injection-plastic figure set for use with military dioramas or individual display. From Gecko Models comes this 1/35 scale British Infantry In Combat Circa 2010-2016, which comes with parts to build these 4 figures. Paint and cement not included.
Top kyvná vidlice od Polini Torsen WD je vhodná na motory Minarelli (dlouhá verze). Extrémní síly, které přináší vyladěné motory, si často s originálním blokem motoru jen tak neporadí. Kyvná vidlice TORSEN WD je inspirovaná Moto GP a poskytuje tak dodatečné vyztužení bloku motoru. Sníží se nepravidelné pohyby a asymetrické opotřebení pneumatik. Kyvná vidlice zároveň umožňuje větší stabilitu, což je znát například v zatáčkách. Kyvná vidlice TORSEN WD lze namontovat pouze s výfuky Polini Big Evolution, For Race 2 a Scooter Team.
1/35 German Kugelpanzer (2 Kits Pack). marking for 4 versions without figures 1:35 scale not built / painted The Kugelpanzer a one-man tank built by Krupp in Germany than exported to Japan and used by the Kwantung Army. It was captured by the Soviets in Manchuria and is on display in the Kubinka Tank Museum. There is no record of it ever having been used in combat.
1/72 Potez 25 A2/B2 Hispano. Decals for four planes: Sigma 3, Greek Air Force, Athenes-Tatoï airfield, end of April or May 1941 - White 20, Rumanian Air Force, Little Entente and Poland competition, Prague, August 1928 - White 12, in monoplane configuration, first Hispano aircraft delivered to Rumania, Prague, August 1928 - Nr 36, White 1, Yugoslav Army, Prague, August 1928.
1/35 German Kugelpanzer (2 Kits Pack). marking for 4 versions without figures 1:35 scale not built / painted The Kugelpanzer a one-man tank built by Krupp in Germany than exported to Japan and used by the Kwantung Army. It was captured by the Soviets in Manchuria and is on display in the Kubinka Tank Museum. There is no record of it ever having been used in combat.
1/72 Potez 25 A2/B2 Hispano. Decals for four planes: Sigma 3, Greek Air Force, Athenes-Tatoï airfield, end of April or May 1941 - White 20, Rumanian Air Force, Little Entente and Poland competition, Prague, August 1928 - White 12, in monoplane configuration, first Hispano aircraft delivered to Rumania, Prague, August 1928 - Nr 36, White 1, Yugoslav Army, Prague, August 1928.
Duke Hawkins: Phantom II E/F/EJ, RF-4C/E/EJ & QF-4E (196 pages) EN. Probably one of the most iconic fighter jets in the world, the McDonnell Douglas F-4 Phantom II was the first aircraft designed for the US Air Force, Navy and Marine Corps. In this 196 page book, we focus on the landbased versions of the Phantom: the E, F, EJ, RF-4C, RF-4E, RF-4EJ and the colourful QF-4E target drone. In this book, every detail of the aircraft is shown, from the cockpit to the wings, fuselage or landing gear. This book is filled to the rim with high quality photos - some 500 of them ! - of aircraft from different air forces. Separate chapters give a closer look at Phantoms of Greece, Iran, South Korea, Turkey and Germany. Action galore! An extensive chapter is included on the QF-4E Target Drone that was used in the USAF. After their active career, many Phantoms were converted to targets for other fighter jets, shooting them down with life missiles. Prepare for close-ups! As is tradition with our books, the cockpit is an important chapter, showing the cockpits of the F-4F, the upgraded Icaros I and the reconnaisance version of the Phantom II. Some 30 pages are dedicated to the Phantom in service with the Japanese Air Self Defence Force. A lot of action, but also a closer look at the F-4EJ Kai upgraded version. The JASDF also operated the Phantom in the reconnaissance role; not just as an RF-4E, but also converted F-4EJs, equipped with different reconnaissance pods. Every pod is included in this book!
1/35 WWII British MG Team in Combat. DESCRIPTION This is an injection-plastic figure set for use with military dioramas or individual display. To go along with their new line of A10 MKII Cruiser tanks, Gecko Models brings us this interesting-looking set of British machine gunner figures! Includes parts to build 5 figures, weapons and equipment; comes with photo-etched parts and decals.
1/72 AJ-37 Viggen Cockpit Set. For the new 1/72 Viggen kit as produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, the new resin parts directly replace the original styrene ones, no surgery required at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/72 AJ-37 Viggen Cockpit Set. For the new 1/72 Viggen kit as produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, the new resin parts directly replace the original styrene ones, no surgery required at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/35 WWII British MG Team in Combat. DESCRIPTION This is an injection-plastic figure set for use with military dioramas or individual display. To go along with their new line of A10 MKII Cruiser tanks, Gecko Models brings us this interesting-looking set of British machine gunner figures! Includes parts to build 5 figures, weapons and equipment; comes with photo-etched parts and decals.
1/32 Gotha UWD. Highly detailed plastic Model kit with PE parts to build a planeScale 1:32not built/painted The unique Gotha UWD was one of several different twin engine seaplanes ordered by the German Navy to fit their requirements for a long range reconnaissance and torpedo carrying aircraft (although there is no evidence to suggest it was ever armed with a torpedo). The Gotha UWD was developed from the G.1 land plane and was completed in December 1915. It was described as easy to fly, able to take to the air with ease and was smooth on landing. In a preview of things to come, Gotha UWD 120 was used to bomb England during early 1916. -274 high-quality injection moulded plastic parts. -4 photo-etched metal detail parts. -2x Daimler-Mercedes 160hp D.III engines. -63cm wingspan. -10kg Carbonit bombs & bomb dropping ‘proboscis’, counter rotating propellers and optional map & document case and camera. -24 page fully illustrated instruction manual. -High quality Cartograf decals for Gotha UWD 120 which served with See Flieger Abteilung 1 in 1916
1/72 Bf 109G-6 Wheel set (smooth and ribbed tyres). This set has been designed for the new Tamiya Bf 109G-6 model and contains two pairs of the mainwheels with their axle mounts matching the specific Tamiya leg parts. The wheels offer two styles of the tread, one being smooth and the other with the distinctive ribbed pattern. The tyres are weighted Country of origin: Germany / WWII
1/72 Bf 109G-6 Wheel set (smooth and ribbed tyres). This set has been designed for the new Tamiya Bf 109G-6 model and contains two pairs of the mainwheels with their axle mounts matching the specific Tamiya leg parts. The wheels offer two styles of the tread, one being smooth and the other with the distinctive ribbed pattern. The tyres are weighted Country of origin: Germany / WWII