Modely
Celkem 42 produktů
1/32 Focke Wulf Fw 190A-8 - Fabric Seat Belts - pre-cut (laser). The set contains complete belts for two aircrafts. Accessory designed for your plastic model Fw190A-8. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. ACCESSORY FEATURES contains micro-fabric and photo-etched highly detailed partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-fabric material which behaves like a piece of ragtextile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations INSTRUCTIONS Take the precut textile part out of the sheet.Remove the carrier paper.Bunch the belts up and knead them between the fingers.Thread the belts through the photo etched buckles – use superglue.Put them into the seat.Spray with glossy varnish.Spray with matt varnish.Impregnate the seat belts with very diluted oil colour (mix of black and brown) > texture highlight.
1/32 Fokker E.IV - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. contains micro-fabric and photo-etched highly detailed parts designed for great Fokker E.IV by Wingnut Wings belts are fully functional - modeler can leave them un/fastened made from printed micro-fabric material which behaves like a piece of rag textile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations photo-etched parts are developed in cooperation with Eduard company
1/48 Messerschmitt Bf 109G-6 - Microplastic Seat Belts - pre-cut (laser). Seat belts, suitable for plastic scale aircrafts, are made from micro-plastic foil. In combination with attached photo etched buckles this accesorry looks highly realistic. These are available in 1/48 scale and for more comfortable work they are pre-cut. contains highly detailed micro-plastic and photo-etched partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-plastic material which credibly simulates textilebelts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparationsphoto-etched parts are developed in cooperation with Hauler company
1/32 Fokker E.I - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. contains micro-fabric and photo-etched highly detailed parts designed for great Fokker E.IV by Wingnut Wings belts are fully functional - modeler can leave them un/fastened made from printed micro-fabric material which behaves like a piece of rag textile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations photo-etched parts are developed in cooperation with Eduard company
1/32 Focke Wulf Fw 190A-8 - Fabric Seat Belts - pre-cut (laser). The set contains complete belts for two aircrafts. Accessory designed for your plastic model Fw190A-8. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. ACCESSORY FEATURES contains micro-fabric and photo-etched highly detailed partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-fabric material which behaves like a piece of ragtextile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations INSTRUCTIONS Take the precut textile part out of the sheet.Remove the carrier paper.Bunch the belts up and knead them between the fingers.Thread the belts through the photo etched buckles – use superglue.Put them into the seat.Spray with glossy varnish.Spray with matt varnish.Impregnate the seat belts with very diluted oil colour (mix of black and brown) > texture highlight.
1/32 Fokker E.IV - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. contains micro-fabric and photo-etched highly detailed parts designed for great Fokker E.IV by Wingnut Wings belts are fully functional - modeler can leave them un/fastened made from printed micro-fabric material which behaves like a piece of rag textile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations photo-etched parts are developed in cooperation with Eduard company
1/48 Messerschmitt Bf 109G-6 - Microplastic Seat Belts - pre-cut (laser). Seat belts, suitable for plastic scale aircrafts, are made from micro-plastic foil. In combination with attached photo etched buckles this accesorry looks highly realistic. These are available in 1/48 scale and for more comfortable work they are pre-cut. contains highly detailed micro-plastic and photo-etched partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-plastic material which credibly simulates textilebelts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparationsphoto-etched parts are developed in cooperation with Hauler company
1/32 Fokker E.I - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. contains micro-fabric and photo-etched highly detailed parts designed for great Fokker E.IV by Wingnut Wings belts are fully functional - modeler can leave them un/fastened made from printed micro-fabric material which behaves like a piece of rag textile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations photo-etched parts are developed in cooperation with Eduard company
Classic Kit loď A07280 - RNLI Severn Class Lifeboat (1:72). Model lodě ke slepení. Velikost: 1:72; 23,6 cm. Balení obsahuje: 189 dílků ke slepení. Informace o originálu: Záchranný člun do každého počasí třídy Severn, který byl do služby u RNLI uveden v roce 1995, je největším plavidlem flotily této organizace. Jeho dojezd činí až 250 námořních mil a dokáže plout maximální rychlostí 25 uzlů. Na své palubě má k dispozici také malý motorový člun třídy Y, který umožňuje záchranné práce i v blízkosti pobřeží. Ten je spouštěn na vodu a poté z ní vytahován pomocí lehkého palubního jeřábu. Lodní šrouby člunu jsou chráněny, takže může najet i na mělčinu bez jakéhokoliv poškození. Informace o modelu: Stavebnice v této krabici Vám umožní postavit model záchranného člunu RNLI i s těmi nejmenšími detaily. Nechybí samozřejmě detailně zpracovaná paluba, trup a další vybavení, po sundání střechy kabiny se však můžete pokochat i plně detailním interiérem. S přibalenou sadou obtisků můžete navíc vytvořit jakýkoliv ze záchranných člunů třídy Severn, které v současnosti u RNLI slouží. Barevné schéma (Potřebné barvy): A - Severn Class Lifeboat, Royal National Lifeboat Institution, UK, July, 2006 - 11, 15, 18, 19, 21, 22, 27, 33, 55, 28, 209 Detaily modelu: Měřítko: 1:72 Počet dílů: 189 Délka: 236 mm Šířka: 78 mm Obtížnost: 2 Body Flying Hours: 2 Doporučeno pro děti od 8 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Classic Kit loď A07280 - RNLI Severn Class Lifeboat (1:72). Model lodě ke slepení. Velikost: 1:72; 23,6 cm. Balení obsahuje: 189 dílků ke slepení. Informace o originálu: Záchranný člun do každého počasí třídy Severn, který byl do služby u RNLI uveden v roce 1995, je největším plavidlem flotily této organizace. Jeho dojezd činí až 250 námořních mil a dokáže plout maximální rychlostí 25 uzlů. Na své palubě má k dispozici také malý motorový člun třídy Y, který umožňuje záchranné práce i v blízkosti pobřeží. Ten je spouštěn na vodu a poté z ní vytahován pomocí lehkého palubního jeřábu. Lodní šrouby člunu jsou chráněny, takže může najet i na mělčinu bez jakéhokoliv poškození. Informace o modelu: Stavebnice v této krabici Vám umožní postavit model záchranného člunu RNLI i s těmi nejmenšími detaily. Nechybí samozřejmě detailně zpracovaná paluba, trup a další vybavení, po sundání střechy kabiny se však můžete pokochat i plně detailním interiérem. S přibalenou sadou obtisků můžete navíc vytvořit jakýkoliv ze záchranných člunů třídy Severn, které v současnosti u RNLI slouží. Barevné schéma (Potřebné barvy): A - Severn Class Lifeboat, Royal National Lifeboat Institution, UK, July, 2006 - 11, 15, 18, 19, 21, 22, 27, 33, 55, 28, 209 Detaily modelu: Měřítko: 1:72 Počet dílů: 189 Délka: 236 mm Šířka: 78 mm Obtížnost: 2 Body Flying Hours: 2 Doporučeno pro děti od 8 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
1/32 Fokker E.I - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.I by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. HGW Models Super Detail Set in 1:32 scale - this set is designed for Wingnut Wings kits photo-etched parts were developed in cooperation with Eduard company contains (check accessories for more info): - 132536 Fokker E.I seatbelts - LASER - 132114 Fokker E.I PE set - 132118 Oberursel U.0 PE set - 632022 Fokker E.I MASK - HGW Decal - Light Wood (tester)
1/32 Fokker E.IV - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.IV by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. Fokker E.IV | Seatbelts | 132537 Fokker E.IV | Photo Etched Parts | 132115 Fokker E.IV | Engine (Oberursel U.III) PE Set | 132119 Fokker E.IV | Masks | 632023 HGW Decal | Tester Set is designed for vintage aircraft model from Wingnut Wings.
1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Halberstadt CI.II - Fabric Seat Belts - pre-cut (laser). Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale.
1/32 FE.2b - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for FE.2b by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. HGW Models Super Detail Set in 1:32 scale - this set is designed for Wingnut Wings kits - check review for this product here photo-etched parts were developed in cooperation with Eduard company contains (check accessories for more info): - 132062 FE.2b Seatbelts - 132019 RFC LEWIS / VICKERS GUN - 132020 RFC BOMB TAIL - RACK - 132079 FE.2b interior - 132080 FE.2b SURFACE DETAILS - 132084 FE.2b engine - 632013 FE.2b MASK - 632014 FE.2b PROPELLER MASK - 532027 FE.2b cockpit Decals
1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Fokker E.I - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.I by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. HGW Models Super Detail Set in 1:32 scale - this set is designed for Wingnut Wings kits photo-etched parts were developed in cooperation with Eduard company contains (check accessories for more info): - 132536 Fokker E.I seatbelts - LASER - 132114 Fokker E.I PE set - 132118 Oberursel U.0 PE set - 632022 Fokker E.I MASK - HGW Decal - Light Wood (tester)
1/32 Fokker E.IV - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.IV by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. Fokker E.IV | Seatbelts | 132537 Fokker E.IV | Photo Etched Parts | 132115 Fokker E.IV | Engine (Oberursel U.III) PE Set | 132119 Fokker E.IV | Masks | 632023 HGW Decal | Tester Set is designed for vintage aircraft model from Wingnut Wings.
1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Halberstadt CI.II - Fabric Seat Belts - pre-cut (laser). Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale.
1/32 FE.2b - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for FE.2b by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. HGW Models Super Detail Set in 1:32 scale - this set is designed for Wingnut Wings kits - check review for this product here photo-etched parts were developed in cooperation with Eduard company contains (check accessories for more info): - 132062 FE.2b Seatbelts - 132019 RFC LEWIS / VICKERS GUN - 132020 RFC BOMB TAIL - RACK - 132079 FE.2b interior - 132080 FE.2b SURFACE DETAILS - 132084 FE.2b engine - 632013 FE.2b MASK - 632014 FE.2b PROPELLER MASK - 532027 FE.2b cockpit Decals
1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
Plastic ModelKit loď 05132 - Flower Class Corvette (early) (1:144). Model lodě ke slepení. Velikost: 1:144; 43,9 cm. Balení obsahuje: 501 dílků ke slepení. V prodeji od 13. 6. 2016. Informace o modelu: Stavebnice britské korvety třídy Flower, jež byla používána jako doprovodné plavidlo spojeneckých konvojů a za druhé světové války pomáhala nést na svých bedrech hlavní nápor bojů proti německým ponorkám. - Trup lodi s konstrukčními detaily na povrchu pláště - Pohyblivý lodní šroub - Detailně zpracované palubní nástavby - Hlavní kanón ráže 10,2 cm - Protiletadlové dělo Pom-pom - Detailně zpracovaná radarová věž - Vrhače hlubinných náloží - Stojan pro vystavení modelu Autentická sada obtisků pro následující verzi: - Korveta HMCS Snowberry třídy Flower, Atlantský oceán, květen 1943 Potřebné barvy: - základní: 08, 09, 37, 57, 69, 82, 92, 301, 350, 362, 371 - další: Detaily modelu: Měřítko: 1:144 Počet dílů: 501 Délka: 439 mm Obtížnost: 5 Doporučeno pro děti od 14 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit ponorka 9025 - K-19 Soviet Nuclear Submarine "Hotel" Class (1:350). Model ponorky ke slepení. Velikost: 1:350; 32,6 cm. Balení obsahuje: 33 dílků ke slepení. Informace o originálu: K-19 se stala první sovětskou jadernou ponorkou s balistickými raketami na palubě. Z hlediska výkonnostních charakteristik se jednalo o vynikající ponorku. Při prvním bojovém hlídkování však došlo k vážné poruše jaderného reaktoru na palubě lodi. Celá situace se odehrála 4. července 1961 v severním Atlantiku. Bez ohledu na své vlastní zdraví se její posádka obětovala, aby udržela kritickou situaci pod kontrolou. I přes řadu poruch a neštěstí, ke kterým na této ponorce došlo, vydržel tento stroj ve službě až do roku 1990. Barevné schéma (Potřebné barvy Humbrol): - 79, 34, 125, 53, 60, 56 Detaily modelu: Měřítko: 1:350 Počet dílů: 33 Délka: 326 mm Doporučeno pro děti od 10 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Plastic ModelKit loď 05162 - German Fast Attack Craft S-100 CLASS (1:72). Model lodě ke slepení. Velikost: 1:72; 48,6 cm. Balení obsahuje: 184 dílků ke slepení. Informace o modelu: Potřebné barvy: - základní: 105, 109, 136, 157, 175, 177, 185, 188, 191, 192 Detaily modelu: Měřítko: 1:72 Počet dílů: 184 Délka: 486 mm Obtížnost: 4 Doporučeno pro děti od 12 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Plastic ModelKit loď 05149 - HMS Ark Royal & Tribal Class Destroyer (1:720). Model lodě ke slepení. Velikost: 1:720; 34,3 cm. Balení obsahuje: 110 dílků ke slepení. V prodeji od 30. 3. 2017. Informace o modelu: Stavebnice letadlové lodi HMS Ark Royal, která je dobře známá zejména díky roli, kterou sehrála při pronásledování německé bitevní lodi Bismarck. - Součástí stavebnice je i torpédoborec F75 Eskimo třídy Tribal - Osm letadel Fairey Fulmar - Stojan pro vystavení modelu - Autentická sada obtisků Potřebné barvy: - základní: 08, 36, 39, 40, 77, 79, 89, 92, 331, 371 - další: 05, 37, 52, 55, 381 Detaily modelu: Měřítko: 1:720 Počet dílů: 110 Délka: 343 mm Obtížnost: 4 Doporučeno pro děti od 12 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit ponorka 9062 - "Tula"Submarine Delfin/Delta IV Class (1:350). Model ponorky ke slepení. Velikost: 1:350; 48,6 cm. Počet dílků: 130. Informace o originálu: Informace o modelu: Barevné schéma (Doporučené barvy Zvezda): - 02, 04, 06, 12, 16, 20, 44 Detaily modelu: Měřítko: 1:350 Délka: 486 mm Počet dílků: 130 Doporučeno pro děti od 14 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Plastic ModelKit loď 05132 - Flower Class Corvette (early) (1:144). Model lodě ke slepení. Velikost: 1:144; 43,9 cm. Balení obsahuje: 501 dílků ke slepení. V prodeji od 13. 6. 2016. Informace o modelu: Stavebnice britské korvety třídy Flower, jež byla používána jako doprovodné plavidlo spojeneckých konvojů a za druhé světové války pomáhala nést na svých bedrech hlavní nápor bojů proti německým ponorkám. - Trup lodi s konstrukčními detaily na povrchu pláště - Pohyblivý lodní šroub - Detailně zpracované palubní nástavby - Hlavní kanón ráže 10,2 cm - Protiletadlové dělo Pom-pom - Detailně zpracovaná radarová věž - Vrhače hlubinných náloží - Stojan pro vystavení modelu Autentická sada obtisků pro následující verzi: - Korveta HMCS Snowberry třídy Flower, Atlantský oceán, květen 1943 Potřebné barvy: - základní: 08, 09, 37, 57, 69, 82, 92, 301, 350, 362, 371 - další: Detaily modelu: Měřítko: 1:144 Počet dílů: 501 Délka: 439 mm Obtížnost: 5 Doporučeno pro děti od 14 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit ponorka 9025 - K-19 Soviet Nuclear Submarine "Hotel" Class (1:350). Model ponorky ke slepení. Velikost: 1:350; 32,6 cm. Balení obsahuje: 33 dílků ke slepení. Informace o originálu: K-19 se stala první sovětskou jadernou ponorkou s balistickými raketami na palubě. Z hlediska výkonnostních charakteristik se jednalo o vynikající ponorku. Při prvním bojovém hlídkování však došlo k vážné poruše jaderného reaktoru na palubě lodi. Celá situace se odehrála 4. července 1961 v severním Atlantiku. Bez ohledu na své vlastní zdraví se její posádka obětovala, aby udržela kritickou situaci pod kontrolou. I přes řadu poruch a neštěstí, ke kterým na této ponorce došlo, vydržel tento stroj ve službě až do roku 1990. Barevné schéma (Potřebné barvy Humbrol): - 79, 34, 125, 53, 60, 56 Detaily modelu: Měřítko: 1:350 Počet dílů: 33 Délka: 326 mm Doporučeno pro děti od 10 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Plastic ModelKit loď 05162 - German Fast Attack Craft S-100 CLASS (1:72). Model lodě ke slepení. Velikost: 1:72; 48,6 cm. Balení obsahuje: 184 dílků ke slepení. Informace o modelu: Potřebné barvy: - základní: 105, 109, 136, 157, 175, 177, 185, 188, 191, 192 Detaily modelu: Měřítko: 1:72 Počet dílů: 184 Délka: 486 mm Obtížnost: 4 Doporučeno pro děti od 12 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Plastic ModelKit loď 05149 - HMS Ark Royal & Tribal Class Destroyer (1:720). Model lodě ke slepení. Velikost: 1:720; 34,3 cm. Balení obsahuje: 110 dílků ke slepení. V prodeji od 30. 3. 2017. Informace o modelu: Stavebnice letadlové lodi HMS Ark Royal, která je dobře známá zejména díky roli, kterou sehrála při pronásledování německé bitevní lodi Bismarck. - Součástí stavebnice je i torpédoborec F75 Eskimo třídy Tribal - Osm letadel Fairey Fulmar - Stojan pro vystavení modelu - Autentická sada obtisků Potřebné barvy: - základní: 08, 36, 39, 40, 77, 79, 89, 92, 331, 371 - další: 05, 37, 52, 55, 381 Detaily modelu: Měřítko: 1:720 Počet dílů: 110 Délka: 343 mm Obtížnost: 4 Doporučeno pro děti od 12 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit ponorka 9062 - "Tula"Submarine Delfin/Delta IV Class (1:350). Model ponorky ke slepení. Velikost: 1:350; 48,6 cm. Počet dílků: 130. Informace o originálu: Informace o modelu: Barevné schéma (Doporučené barvy Zvezda): - 02, 04, 06, 12, 16, 20, 44 Detaily modelu: Měřítko: 1:350 Délka: 486 mm Počet dílků: 130 Doporučeno pro děti od 14 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
