Modely
Celkem 744 produktů
Plastikový model letadla 1/72 Fouga CM.170 Magister ‘French, Belgian and Irish Service’. The Fouga Magister was a French jet trainer aircraft which was used by a large number of oprators, not only in Europe. This boxing brings decal schemes for French, Belgian and Irish options.four grey styrene sprues and one clear canopy sprue. four marking options, two as flown in France (one of which sports an anniversary scheme), one operated in Belgium and one in the Republic of Ireland nicely detailed model resin detail sets also available for any Fouga boxing: Seats Q72227, Wheels Q72228, Pilots and a Mechanic F72306 for Israeli boxing, we have also designed armament sets: Unguided Rockets Q72348, Bombs Q72349 and Rocket launchers Q72306.
Plastikový model letadla 1/72 Fouga CM.170 Magister ‘French, Belgian and Irish Service’. The Fouga Magister was a French jet trainer aircraft which was used by a large number of oprators, not only in Europe. This boxing brings decal schemes for French, Belgian and Irish options.four grey styrene sprues and one clear canopy sprue. four marking options, two as flown in France (one of which sports an anniversary scheme), one operated in Belgium and one in the Republic of Ireland nicely detailed model resin detail sets also available for any Fouga boxing: Seats Q72227, Wheels Q72228, Pilots and a Mechanic F72306 for Israeli boxing, we have also designed armament sets: Unguided Rockets Q72348, Bombs Q72349 and Rocket launchers Q72306.
1/32 Focke Wulf Fw 190A-8 - Fabric Seat Belts - pre-cut (laser). The set contains complete belts for two aircrafts. Accessory designed for your plastic model Fw190A-8. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. ACCESSORY FEATURES contains micro-fabric and photo-etched highly detailed partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-fabric material which behaves like a piece of ragtextile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations INSTRUCTIONS Take the precut textile part out of the sheet.Remove the carrier paper.Bunch the belts up and knead them between the fingers.Thread the belts through the photo etched buckles – use superglue.Put them into the seat.Spray with glossy varnish.Spray with matt varnish.Impregnate the seat belts with very diluted oil colour (mix of black and brown) > texture highlight.
1/32 Focke Wulf Fw 190A-8 - Fabric Seat Belts - pre-cut (laser). The set contains complete belts for two aircrafts. Accessory designed for your plastic model Fw190A-8. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. ACCESSORY FEATURES contains micro-fabric and photo-etched highly detailed partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-fabric material which behaves like a piece of ragtextile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations INSTRUCTIONS Take the precut textile part out of the sheet.Remove the carrier paper.Bunch the belts up and knead them between the fingers.Thread the belts through the photo etched buckles – use superglue.Put them into the seat.Spray with glossy varnish.Spray with matt varnish.Impregnate the seat belts with very diluted oil colour (mix of black and brown) > texture highlight.
Plastikový model letadla 1/7 2P-40E Warhawk 'Claws and Teeth' . The very icon of US WW2 aviation, the Warhawk model E. The kit contains – two grey styrene sprues, one sprue of clear plastic, full colour instruction booklet and decal sheet with markings for four really eye-catching liveries. Higly accurate and nicely detailed model, the best of Warhawks in this scale Easy assembly Incredible price Decals printed by Cartograf cater for two machines as flown from China-based airfields and another two operated from Australia, all of them wearing highly interesting markings and colours, with remarkable operation history and flown by USAAF ace pilots. Three of the hand picked machines wear viciously-looking shark jaws, the fourth one (depicted on the kit’s box) was adorned with a large bird of prey on its rear fuselage and distinctive motifs on either side of its nose Wide range of CMK accessories available, including pilot/mechanic figures. Country of origin: USA / WWII
Plastikový model letadla 1/7 2P-40E Warhawk 'Claws and Teeth' . The very icon of US WW2 aviation, the Warhawk model E. The kit contains – two grey styrene sprues, one sprue of clear plastic, full colour instruction booklet and decal sheet with markings for four really eye-catching liveries. Higly accurate and nicely detailed model, the best of Warhawks in this scale Easy assembly Incredible price Decals printed by Cartograf cater for two machines as flown from China-based airfields and another two operated from Australia, all of them wearing highly interesting markings and colours, with remarkable operation history and flown by USAAF ace pilots. Three of the hand picked machines wear viciously-looking shark jaws, the fourth one (depicted on the kit’s box) was adorned with a large bird of prey on its rear fuselage and distinctive motifs on either side of its nose Wide range of CMK accessories available, including pilot/mechanic figures. Country of origin: USA / WWII
Classic Kit letadlo A03050 - Fouga Magister (1:72). Model letadla ke slepení. Velikost: 1:72; 13,9 cm. Balení obsahuje: 56 dílků ke slepení. Informace o originálu: Magister, navržený a vyrobený ve Francii v roce 1956, se stal vůbec prvním proudovým výcvikovým letadlem na světě, které vstoupilo do služby u armády. S výraznou „motýlí“ zádí si rychle vysloužil všeobecné přijetí a objednávky začaly přicházet například z Belgie a Rakouska, licenční výroba pak probíhala také pro dodávky do Německa, Finska a Izraele. Barevné schéma (Potřebné barvy): A - Fouga CM.170 Magister, Silver Swallows Aerobatic Team, Light Strike Squadron, Aer Chor na hEireann (Irish Air Corps), Casement Aerodrome, Baldonnel, Eire (Republic of Ireland), 1997 -11, 33, 34, 53, 117, 209 B - Fouga CM.170 Magister, Bierset Station Flight, Belgium, 1983/84 - 11, 33, 34, 53, 116, 117, 118, 153 Detaily modelu: Měřítko: 1:72 Počet dílů: 56 Délka: 139 mm Rozpětí křídel: 167 mm Obtížnost: 2 Body Flying Hours: 1 Doporučeno pro děti od 8 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Classic Kit letadlo A03050 - Fouga Magister (1:72). Model letadla ke slepení. Velikost: 1:72; 13,9 cm. Balení obsahuje: 56 dílků ke slepení. Informace o originálu: Magister, navržený a vyrobený ve Francii v roce 1956, se stal vůbec prvním proudovým výcvikovým letadlem na světě, které vstoupilo do služby u armády. S výraznou „motýlí“ zádí si rychle vysloužil všeobecné přijetí a objednávky začaly přicházet například z Belgie a Rakouska, licenční výroba pak probíhala také pro dodávky do Německa, Finska a Izraele. Barevné schéma (Potřebné barvy): A - Fouga CM.170 Magister, Silver Swallows Aerobatic Team, Light Strike Squadron, Aer Chor na hEireann (Irish Air Corps), Casement Aerodrome, Baldonnel, Eire (Republic of Ireland), 1997 -11, 33, 34, 53, 117, 209 B - Fouga CM.170 Magister, Bierset Station Flight, Belgium, 1983/84 - 11, 33, 34, 53, 116, 117, 118, 153 Detaily modelu: Měřítko: 1:72 Počet dílů: 56 Délka: 139 mm Rozpětí křídel: 167 mm Obtížnost: 2 Body Flying Hours: 1 Doporučeno pro děti od 8 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
1/35 German Kugelpanzer (2 Kits Pack). marking for 4 versions without figures 1:35 scale not built / painted The Kugelpanzer a one-man tank built by Krupp in Germany than exported to Japan and used by the Kwantung Army. It was captured by the Soviets in Manchuria and is on display in the Kubinka Tank Museum. There is no record of it ever having been used in combat.
1/35 3cm Flakvierling 103/38. The Mk103/38 was a late-war, four-gun installation of the Mk103 3cm gun from Rheinmetall Borsig. The Mk103 was an electrically fired, recoil and gas-operated automatic cannon designed to be used as a dual-purpose weapon against air and ground targets.The Mk103 had a rate of fire of 280 rounds per minute using high explosive (HE) rounds, and 420 rounds per minute when firing Armor Piercing rounds.The experimental Mk103/38 four-gun installation proved troublesome due to fact that the mount was originally designed for the smaller 2cm Flak 38, and heavy vibration took it’s toll on both the equipment and the crew aiming the weapon.
1/35 3cm Flakvierling 103/38. The Mk103/38 was a late-war, four-gun installation of the Mk103 3cm gun from Rheinmetall Borsig. The Mk103 was an electrically fired, recoil and gas-operated automatic cannon designed to be used as a dual-purpose weapon against air and ground targets.The Mk103 had a rate of fire of 280 rounds per minute using high explosive (HE) rounds, and 420 rounds per minute when firing Armor Piercing rounds.The experimental Mk103/38 four-gun installation proved troublesome due to fact that the mount was originally designed for the smaller 2cm Flak 38, and heavy vibration took it’s toll on both the equipment and the crew aiming the weapon.
1/35 German Kugelpanzer (2 Kits Pack). marking for 4 versions without figures 1:35 scale not built / painted The Kugelpanzer a one-man tank built by Krupp in Germany than exported to Japan and used by the Kwantung Army. It was captured by the Soviets in Manchuria and is on display in the Kubinka Tank Museum. There is no record of it ever having been used in combat.
Plastikový model letadla 1/72 Morane Saulnier MS-410C.1. Model of the French WW2 fighter plane, an improved and more powerful version of the MS-406. Contents of the box: three styrene sprues, one clear, resin cast parts, photo etches, full colour instructions, decals. finely detailed model decals offer markings for one French machine and four Finnish, all of which wearing eye-catching schemes. two styles of the wings. Country of origin: France, Finland / WWII
Plastikový model letadla 1/72 Morane Saulnier MS-410C.1. Model of the French WW2 fighter plane, an improved and more powerful version of the MS-406. Contents of the box: three styrene sprues, one clear, resin cast parts, photo etches, full colour instructions, decals. finely detailed model decals offer markings for one French machine and four Finnish, all of which wearing eye-catching schemes. two styles of the wings. Country of origin: France, Finland / WWII
1/35 WWII British MG Team in Combat. DESCRIPTION This is an injection-plastic figure set for use with military dioramas or individual display. To go along with their new line of A10 MKII Cruiser tanks, Gecko Models brings us this interesting-looking set of British machine gunner figures! Includes parts to build 5 figures, weapons and equipment; comes with photo-etched parts and decals.
1/35 British Infantry in Combat 2010-16 Set 2. This is an injection-plastic figure set for use with military dioramas or individual display. Gecko Models brings us this highly detailed set of British Infantry. These soldiers are frozen in combat and are featured with a more modern look of about 2010- 2016. Includes parts to build 4 figures, weapons and equipment; comes with photo etched parts and decals. *Actual models may vary from image on the box. [Mold Color]: Gray [Includes]: Photo-etched parts and decals
1/72 SK-37 Viggen Cockpit Set. For the new 1/72 Viggen kit, respectively for the SK-37 two seater version produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, with the new resin parts directly replacing the original styrene ones, no surgery is needed at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/72 SK-37 Viggen Cockpit Set. For the new 1/72 Viggen kit, respectively for the SK-37 two seater version produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, with the new resin parts directly replacing the original styrene ones, no surgery is needed at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/35 2CM SALVENMASCHINENKANONE SMK 18 TYPE 2. This is an injection-plastic field gun model kit. The SMK18 Type 2 2-cm cannon is a high-fidelity gun made by Germany during World War II. The idea was to shoot down enemy aircraft by simultaneously firing eight 2-cm cannons. The Type 1 had the cannons in a horizontal arrangement; the prototype of the Type 2 was built in 1939, but it proved to be too unstable for use, as there was too much of a load on its moving parts. This gun is currently on display in a museum in Moscow, Russia. This kit features highly detailed breech and carriage assemblies, working elevation and sight mechanisms, and a choice of optical or iron sights. The stabilizer arms are movable, and a set of photo-etched parts is included as well. Order yours today! [Includes]: Photo-etched parts
1/48 Blenheim Mk.I/II Finish AF 1st serie Ski Undercarriage – fixed type . During the long winter months, the Finnish military operated both the original British and indigenously-built Blenheim aircraft with two styles of ski undercarriage. The fixed type offered in this set was mounted directly into the undercarriage nacelles. The resin parts have been designed to fit the new Blenheim model produced by Airfix. Country of origin: Finland / WWII
1/48 Blenheim Mk.I/II Finish AF 1st serie Ski Undercarriage – fixed type . During the long winter months, the Finnish military operated both the original British and indigenously-built Blenheim aircraft with two styles of ski undercarriage. The fixed type offered in this set was mounted directly into the undercarriage nacelles. The resin parts have been designed to fit the new Blenheim model produced by Airfix. Country of origin: Finland / WWII
1/35 2CM SALVENMASCHINENKANONE SMK 18 TYPE 2. This is an injection-plastic field gun model kit. The SMK18 Type 2 2-cm cannon is a high-fidelity gun made by Germany during World War II. The idea was to shoot down enemy aircraft by simultaneously firing eight 2-cm cannons. The Type 1 had the cannons in a horizontal arrangement; the prototype of the Type 2 was built in 1939, but it proved to be too unstable for use, as there was too much of a load on its moving parts. This gun is currently on display in a museum in Moscow, Russia. This kit features highly detailed breech and carriage assemblies, working elevation and sight mechanisms, and a choice of optical or iron sights. The stabilizer arms are movable, and a set of photo-etched parts is included as well. Order yours today! [Includes]: Photo-etched parts
Plastikový model letadla 1/72 A.W. Meteor NF Mk.11 ‘Nato Users’. This British all weather twin jet fighter aeroplane not only served quite a long time with the RAF, it was also exported with considerable success to a number of NATO countries as well as to the Middle East. four grey styrene sprues, one clear plastic sprue. decal sheet covering three options come with a full set of airframe stencils marking options for a Belgian, French and a Danish machines
Plastikový model letadla 1/72 A.W. Meteor NF Mk.11 ‘Nato Users’. This British all weather twin jet fighter aeroplane not only served quite a long time with the RAF, it was also exported with considerable success to a number of NATO countries as well as to the Middle East. four grey styrene sprues, one clear plastic sprue. decal sheet covering three options come with a full set of airframe stencils marking options for a Belgian, French and a Danish machines
Plastikový model letadla 1/72 DH.100 Vampire Mk.I RAF, RAAF and Armée de l. The kit’s plastic parts come on three grey styrene sprues and two clear sprues which are accompanied by a fret of photo-etches. The first clear sprue offers the standard, late type of the clear hood and also the original, early style canopy typical for the first Mk.Is. This part, however, was not manufactured to our standards, which we regret of course, and thus we have decided to rework the design completely and produce a second sprue with much more exact rendition of the early hood. The decal sheet contains markings for three RAF machines which differ by having various national markings on them, another machine with serial A78-1which was flown by the RAAF down under and the final option brings a very special French machine, in fact a remotely controlled drone named Porthos Originally, the Vampire Mk.I kit was to offer schemes for just two operators of the type, the RAF and RAAF. It has been decided, however, that a new marking option will be offered in this boxing to make it more attractive for a wider range of modellers. The new addition to the kit is a quite eye-catching machine wearing French colours and the title of this boxing has also been updated.
Plastikový model letadla 1/72 DH.100 Vampire Mk.I RAF, RAAF and Armée de l. The kit’s plastic parts come on three grey styrene sprues and two clear sprues which are accompanied by a fret of photo-etches. The first clear sprue offers the standard, late type of the clear hood and also the original, early style canopy typical for the first Mk.Is. This part, however, was not manufactured to our standards, which we regret of course, and thus we have decided to rework the design completely and produce a second sprue with much more exact rendition of the early hood. The decal sheet contains markings for three RAF machines which differ by having various national markings on them, another machine with serial A78-1which was flown by the RAAF down under and the final option brings a very special French machine, in fact a remotely controlled drone named Porthos Originally, the Vampire Mk.I kit was to offer schemes for just two operators of the type, the RAF and RAAF. It has been decided, however, that a new marking option will be offered in this boxing to make it more attractive for a wider range of modellers. The new addition to the kit is a quite eye-catching machine wearing French colours and the title of this boxing has also been updated.
1/48 Spitfire Mk.IXe. Scale plastic kit Spitfire Mk.IXe in 1/48 scale.British WWII fighter, released in Weekend Editionplastic parts: EduardNo. of decal options: 1Decals: EduardPE parts: nopainting mask: noResin parts: noMarking option:LF Mk.IXe, TE570, Letecký pluk 7, airfield Praha-Kbely, september 1946Model length: 202 mmWingspan: 235 mmPlastic parts: 207Made in Czech Republic.
