Modely
Celkem 165 produktů
Wargames tank 15764 - IS-2 MOD. 1944 (1:56). Model tanku ke slepení. Velikost: 1:56. Balení obsahuje polepy pro 5 verzí modelu. Informace o originálu: V únoru 1943 byly jako náhrada za zastaralou sérii KV navrženy první prototypy nových těžkých tanků, které měly vybavit tankové regimenty Rudé armády a vyrovnat síly proti novým a účinným německým Tigerům a Pantherům. Nejslavnějším z nich byl Joseph Stalin JS-2. Ten měl jako hlavní součást výzbroje silné 122mm dělo D25-T namontované v hlavní dělové věži a typická pro něj byla odlitá korba, těžký pancíř a pohonná jednotka v podobě dvanáctiválcového naftového agregátu s 600 koňmi. Jeho celková hmotnost byla 46 tun. Podílel se na bojích, které vedly k osvobození Ukrajiny, na operacích při dobytí Maďarska a v konečné fázi druhé světové války v Evropě také na samotné bitvě o Berlín. Informace o modelu: 100% NOVÁ STAVEBNICE – BALENÍ OBSAHUJE 1 MODEL A 1 TANKISTU RUSKÉ VOJENSKÉ VOZIDLO Z 2. SVĚTOVÉ VÁLKY - (28 mm.) SNADNO SESTAVITELNÝ MODEL PRO HRÁČE A SBĚRATELE Barevné schéma (Doporučené barvy Italeri): - 4679AP, 4769AP, 4807AP Detaily modelu: Měřítko: 1:56 Obtížnost: 2 Doporučeno pro děti od 14 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Wargames tank 15764 - IS-2 MOD. 1944 (1:56). Model tanku ke slepení. Velikost: 1:56. Balení obsahuje polepy pro 5 verzí modelu. Informace o originálu: V únoru 1943 byly jako náhrada za zastaralou sérii KV navrženy první prototypy nových těžkých tanků, které měly vybavit tankové regimenty Rudé armády a vyrovnat síly proti novým a účinným německým Tigerům a Pantherům. Nejslavnějším z nich byl Joseph Stalin JS-2. Ten měl jako hlavní součást výzbroje silné 122mm dělo D25-T namontované v hlavní dělové věži a typická pro něj byla odlitá korba, těžký pancíř a pohonná jednotka v podobě dvanáctiválcového naftového agregátu s 600 koňmi. Jeho celková hmotnost byla 46 tun. Podílel se na bojích, které vedly k osvobození Ukrajiny, na operacích při dobytí Maďarska a v konečné fázi druhé světové války v Evropě také na samotné bitvě o Berlín. Informace o modelu: 100% NOVÁ STAVEBNICE – BALENÍ OBSAHUJE 1 MODEL A 1 TANKISTU RUSKÉ VOJENSKÉ VOZIDLO Z 2. SVĚTOVÉ VÁLKY - (28 mm.) SNADNO SESTAVITELNÝ MODEL PRO HRÁČE A SBĚRATELE Barevné schéma (Doporučené barvy Italeri): - 4679AP, 4769AP, 4807AP Detaily modelu: Měřítko: 1:56 Obtížnost: 2 Doporučeno pro děti od 14 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
1/72 GERMAN 50T TYPE SSYS SCHWERER PLATFORMWAGEN. This is an injection-plastic military vehicle model kit. The Type SSys 50-ton armored railway flatbed car was used by the Germans to transport their heavy tanks during WWII. This kit includes two frets of photo-etched parts and decals for 2 markings versions. [Includes]: Photo-etched parts, decals for 2 versions
Plastikový model letadla 1/72 Blohm and Voss Ae 607 4 decal v. for Luftwaffe, Great Britain. Early in 1945, a Blohm & Voss (B&V) aircraft designer called Thieme began work on Drawing Number Ae 607, within the standard drawing numbering system at B&V. His design for a jet fighter was radically different from anything that B&V had done before. A flying wing, it approximated to a 45° delta planform. Reports of its existence were not confirmed until 2017, when the drawing was published. No Project number is recorded for the design and its intended status is unknown.[
1/72 GERMAN 80T TYPE SSYMS SCHWERER PLATFORMWAGEN. This is an injection-plastic military vehicle model kit. The Type SSyms 80-ton armored railway flatbed car was used by the Germans to transport their heavy tanks during WWII. This kit includes two frets of photo-etched parts and decals for 2 markings versions. [Includes]: Photo-etched parts, decals for 2 versions
1/72 GERMAN 80T TYPE SSYMS SCHWERER PLATFORMWAGEN. This is an injection-plastic military vehicle model kit. The Type SSyms 80-ton armored railway flatbed car was used by the Germans to transport their heavy tanks during WWII. This kit includes two frets of photo-etched parts and decals for 2 markings versions. [Includes]: Photo-etched parts, decals for 2 versions
1/72 GERMAN 50T TYPE SSYS SCHWERER PLATFORMWAGEN. This is an injection-plastic military vehicle model kit. The Type SSys 50-ton armored railway flatbed car was used by the Germans to transport their heavy tanks during WWII. This kit includes two frets of photo-etched parts and decals for 2 markings versions. [Includes]: Photo-etched parts, decals for 2 versions
Plastikový model letadla 1/72 Blohm and Voss Ae 607 4 decal v. for Luftwaffe, Great Britain. Early in 1945, a Blohm & Voss (B&V) aircraft designer called Thieme began work on Drawing Number Ae 607, within the standard drawing numbering system at B&V. His design for a jet fighter was radically different from anything that B&V had done before. A flying wing, it approximated to a 45° delta planform. Reports of its existence were not confirmed until 2017, when the drawing was published. No Project number is recorded for the design and its intended status is unknown.[
Model Kit military 3534 - ISU-122 (1:35). Model letadla ke slepení. Velikost: 1:35; 29,2 cm. Balení obsahuje: 194 dílků ke slepení. Informace o originálu: Toto samohybné dělo bylo postaveno na platformě těžkého tanku Is-2. Mělo zcela uzavřenou obrněnou dělovou věž a 122 mm kanón. ISU-122 bylo navrženo pro ničení nepřátelských tanků a prorážení opevněných linií. Vynikajícím doplňkem k této stavebnici mohou být například figurky vojáků sovětských speciálních přepadových skupin (Zvezda č. 3509). Barevné schéma (Potřebné barvy Humbrol): - 27003, 53, 110, 98, 116 Detaily modelu: Měřítko: 1:35 Počet dílů: 194 Délka: 292 mm Doporučeno pro děti od 10 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit military 3532 - ISU-152 Soviet Self-propelled Gun (1:35). Model military ke slepení. Velikost: 1:35; 25,5 cm. Balení obsahuje: 200 dílků ke slepení. Informace o originálu: ISU-152 bylo výjimečně silné samohybné dělo postavené za druhé světové války na bázi těžkého tanku IS-2. Rusové tento vůz hojně využívali proti německým tankům – Tigery nevyjímaje – a pro potlačování nepřátelské palby. ISU-152 byl ale také používán pro útoky na opevněná palebná stanoviště jako betonové bunkry apod. Barevné schéma (Potřebné barvy Humbrol): - 116, 186, 53, 110 Detaily modelu: Měřítko: 1:35 Počet dílů: 200 Délka: 255 mm Doporučeno pro děti od 10 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit military 3532 - ISU-152 Soviet Self-propelled Gun (1:35). Model military ke slepení. Velikost: 1:35; 25,5 cm. Balení obsahuje: 200 dílků ke slepení. Informace o originálu: ISU-152 bylo výjimečně silné samohybné dělo postavené za druhé světové války na bázi těžkého tanku IS-2. Rusové tento vůz hojně využívali proti německým tankům – Tigery nevyjímaje – a pro potlačování nepřátelské palby. ISU-152 byl ale také používán pro útoky na opevněná palebná stanoviště jako betonové bunkry apod. Barevné schéma (Potřebné barvy Humbrol): - 116, 186, 53, 110 Detaily modelu: Měřítko: 1:35 Počet dílů: 200 Délka: 255 mm Doporučeno pro děti od 10 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit military 3534 - ISU-122 (1:35). Model letadla ke slepení. Velikost: 1:35; 29,2 cm. Balení obsahuje: 194 dílků ke slepení. Informace o originálu: Toto samohybné dělo bylo postaveno na platformě těžkého tanku Is-2. Mělo zcela uzavřenou obrněnou dělovou věž a 122 mm kanón. ISU-122 bylo navrženo pro ničení nepřátelských tanků a prorážení opevněných linií. Vynikajícím doplňkem k této stavebnici mohou být například figurky vojáků sovětských speciálních přepadových skupin (Zvezda č. 3509). Barevné schéma (Potřebné barvy Humbrol): - 27003, 53, 110, 98, 116 Detaily modelu: Měřítko: 1:35 Počet dílů: 194 Délka: 292 mm Doporučeno pro děti od 10 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit tank 3524 - Josef Stalin-2 Soviet Heavy Tank (1:35). Model tanku ke slepení. Velikost: 1:35; 27 cm. Balení obsahuje: dílků ke slepení. Informace o originálu: Těžký tank IS-2 (Josef Stalin) byl vyzbrojen 122 mm dělem a do služby vstoupil v roce 1944. Tento vůz se používal hlavně proti nepřátelským tankům, opevněním a dělostřelectvu.
Model Kit tank 3524 - Josef Stalin-2 Soviet Heavy Tank (1:35). Model tanku ke slepení. Velikost: 1:35; 27 cm. Balení obsahuje: dílků ke slepení. Informace o originálu: Těžký tank IS-2 (Josef Stalin) byl vyzbrojen 122 mm dělem a do služby vstoupil v roce 1944. Tento vůz se používal hlavně proti nepřátelským tankům, opevněním a dělostřelectvu.
Plastikový model letadla 1/72 SH 89 / CASA C.212 'ASW & Maritime Patrol' . The CASA C.212 is a Spanish turboprop-powered STOL cargo aircraft that has seen service with a wide range of countries and flew in many different roles, one of them being maritime surveillance and patrol. Machines fitted for this sort of tasks carry radar antennae in distinctive, duck beak like shaped radomes at the front of the fuselage as well as some more electronics equipment within the airframe. Highly accurate and nicely detailed model Precisely designed sheet of decals offering markings for two Swedish airframes in different colour schemes, one Malta-based machine and a Spanish one. Specific antenna arrays made of resin and photo-etches Double-slotted wing flaps – resin set no.7407 – is recommended for discerning modeller
Plastikový model letadla 1/72 SH 89 / CASA C.212 'ASW & Maritime Patrol' . The CASA C.212 is a Spanish turboprop-powered STOL cargo aircraft that has seen service with a wide range of countries and flew in many different roles, one of them being maritime surveillance and patrol. Machines fitted for this sort of tasks carry radar antennae in distinctive, duck beak like shaped radomes at the front of the fuselage as well as some more electronics equipment within the airframe. Highly accurate and nicely detailed model Precisely designed sheet of decals offering markings for two Swedish airframes in different colour schemes, one Malta-based machine and a Spanish one. Specific antenna arrays made of resin and photo-etches Double-slotted wing flaps – resin set no.7407 – is recommended for discerning modeller
1/48 Messerschmitt Bf109 Crosses + Stencils - Wet Transfers - various manufacturers. Crosses and stencils for Messerschmitt Bf109 in 1/48 scale. Wet transfer technology means that decal doesn't leave any signs of varnish or typical film after its application, so only text or symbols stay attached to the surface. The biggest issue relating to using ordinary decals is the varnish which creates a glossy film around the decal. It is quite hard to work with classic decals the way to make this film invisible and it is impossible to reach a good result in case of metallic surfaces. OK, there are dry transfers on the market but work with them is also quite uncomfortable, it is hard to place them correctly and a modeler has the one chance only. HGW's wet transfers are similar to ordinary decals. It is possible to move them during the attaching process and find the best position. Then just push the water from below the transfer, let it dry few hours, remove the transfer foil and work is done. Only text or symbol stays attached to the surface. Instructions: 1. Cut the required part.2. Soak in hot water and wait till the decal loose its base-paper.3. Apply as regular decal.4. Push the water from below the decal.5. Let it dry for 2-3 hours.6. Remove the transfer foil and clean the glue stains with water.
1/48 Messerschmitt Bf109 Crosses + Stencils - Wet Transfers - various manufacturers. Crosses and stencils for Messerschmitt Bf109 in 1/48 scale. Wet transfer technology means that decal doesn't leave any signs of varnish or typical film after its application, so only text or symbols stay attached to the surface. The biggest issue relating to using ordinary decals is the varnish which creates a glossy film around the decal. It is quite hard to work with classic decals the way to make this film invisible and it is impossible to reach a good result in case of metallic surfaces. OK, there are dry transfers on the market but work with them is also quite uncomfortable, it is hard to place them correctly and a modeler has the one chance only. HGW's wet transfers are similar to ordinary decals. It is possible to move them during the attaching process and find the best position. Then just push the water from below the transfer, let it dry few hours, remove the transfer foil and work is done. Only text or symbol stays attached to the surface. Instructions: 1. Cut the required part.2. Soak in hot water and wait till the decal loose its base-paper.3. Apply as regular decal.4. Push the water from below the decal.5. Let it dry for 2-3 hours.6. Remove the transfer foil and clean the glue stains with water.
1/72 Blackburn Firebrand TF.Mk.IV. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. The Firebrand TF Mk.IV featured a 2,520bhp Centaurus IX or Centaurus 57 engine. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.IV. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. The Firebrand TF Mk.IV featured a 2,520bhp Centaurus IX or Centaurus 57 engine. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.5. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.5. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/32 Fokker E.I - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.I by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. HGW Models Super Detail Set in 1:32 scale - this set is designed for Wingnut Wings kits photo-etched parts were developed in cooperation with Eduard company contains (check accessories for more info): - 132536 Fokker E.I seatbelts - LASER - 132114 Fokker E.I PE set - 132118 Oberursel U.0 PE set - 632022 Fokker E.I MASK - HGW Decal - Light Wood (tester)
1/32 Fokker E.I - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.I by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. HGW Models Super Detail Set in 1:32 scale - this set is designed for Wingnut Wings kits photo-etched parts were developed in cooperation with Eduard company contains (check accessories for more info): - 132536 Fokker E.I seatbelts - LASER - 132114 Fokker E.I PE set - 132118 Oberursel U.0 PE set - 632022 Fokker E.I MASK - HGW Decal - Light Wood (tester)
1/35 Panzerkampfwagen 38(t) Ausf.E/F. This is an injection-plastic military vehicle model kit. From Tamiya: After the effective annexation of Czechoslovakia by Nazi Germany in 1939, German forces were interested enough in the native Czech LTvz38 light tank that they took it on and ordered production under their own categorization of 38(t), a light tank with riveted, welded armor and a perky 3.7cm gun. Early production 38(t)s took part in the early German offensives of the war, and the 38(t) underwent continued development with 1,400 produced in total. Ausf.E and F 38(t)s had additional armor across the vehicle for better survivability and were deployed during the early stages of Operation Barbarossa as Nazi Germany once again invaded a neighbor, this time the Soviet Union. About the Model Length: 132mm, width: 62mm The 38(t) form with riveted armor plate is accurately depicted. Parts are included to recreate fender-top stowage boxes that were often added by units on the front line. Assembly type tracks feature single-piece straight sections for fine reproduction of upper run 'sag.' Engine grille mesh is rendered faithfully using a photo-etched component. Comes with a commander figure for installation in the hatch, and two Eastern Front marking options.
1/35 Panzerkampfwagen 38(t) Ausf.E/F. This is an injection-plastic military vehicle model kit. From Tamiya: After the effective annexation of Czechoslovakia by Nazi Germany in 1939, German forces were interested enough in the native Czech LTvz38 light tank that they took it on and ordered production under their own categorization of 38(t), a light tank with riveted, welded armor and a perky 3.7cm gun. Early production 38(t)s took part in the early German offensives of the war, and the 38(t) underwent continued development with 1,400 produced in total. Ausf.E and F 38(t)s had additional armor across the vehicle for better survivability and were deployed during the early stages of Operation Barbarossa as Nazi Germany once again invaded a neighbor, this time the Soviet Union. About the Model Length: 132mm, width: 62mm The 38(t) form with riveted armor plate is accurately depicted. Parts are included to recreate fender-top stowage boxes that were often added by units on the front line. Assembly type tracks feature single-piece straight sections for fine reproduction of upper run 'sag.' Engine grille mesh is rendered faithfully using a photo-etched component. Comes with a commander figure for installation in the hatch, and two Eastern Front marking options.
1/32 Fokker E.IV - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.IV by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. Fokker E.IV | Seatbelts | 132537 Fokker E.IV | Photo Etched Parts | 132115 Fokker E.IV | Engine (Oberursel U.III) PE Set | 132119 Fokker E.IV | Masks | 632023 HGW Decal | Tester Set is designed for vintage aircraft model from Wingnut Wings.
1/32 Fokker E.IV - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.IV by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. Fokker E.IV | Seatbelts | 132537 Fokker E.IV | Photo Etched Parts | 132115 Fokker E.IV | Engine (Oberursel U.III) PE Set | 132119 Fokker E.IV | Masks | 632023 HGW Decal | Tester Set is designed for vintage aircraft model from Wingnut Wings.
1/35 British ATMP w/ Ammo Pallet. This is an injection-plastic figure set for use with military dioramas or individual display. Gecko Models brings us this highly detailed set of British Infantry. These soldiers are frozen in combat and are featured with a more modern look of about 2010- 2016. Includes parts to build 4 figures, weapons and equipment; comes with photo etched parts and decals. *Actual models may vary from image on the box. [Mold Color]: Gray [Includes]: Photo-etched parts and decals
1/35 British ATMP w/ Ammo Pallet. This is an injection-plastic figure set for use with military dioramas or individual display. Gecko Models brings us this highly detailed set of British Infantry. These soldiers are frozen in combat and are featured with a more modern look of about 2010- 2016. Includes parts to build 4 figures, weapons and equipment; comes with photo etched parts and decals. *Actual models may vary from image on the box. [Mold Color]: Gray [Includes]: Photo-etched parts and decals
Model Kit tank 3678 - Panther Ausf.D (1:35). Model tanku ke slepení. Velikost: 1:35; 24,7 cm. Balení obsahuje: 698 dílků ke slepení. Informace o originálu: Toto bojové vozidlo vyvinula německá společnost MAN v letech 1941 a 1942 jako hlavní tank pro Wehrmacht. Svůj bojový debut absolvoval Panther v bitvě u Kurska; později operovaly tanky tohoto typu na všech evropských bojištích. Panther je považován za nejlepší německý tank druhé světové války. Jeho hlavní výzbrojí byl 75 mm kanón Rheinmetall-Borsig KwK 42, jehož projektilům dokázal odolat pouze těžký pancíř sovětského tanku IS-2 a amerického M26 Pershing. Barevné schéma (Potřebné barvy Humbrol): - 53, 113, 34, 93, 33, 110, 117, 160 Detaily modelu: Měřítko: 1:35 Počet dílů: 698 Délka: 247 mm Doporučeno pro děti od 10 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit tank 3678 - Panther Ausf.D (1:35). Model tanku ke slepení. Velikost: 1:35; 24,7 cm. Balení obsahuje: 698 dílků ke slepení. Informace o originálu: Toto bojové vozidlo vyvinula německá společnost MAN v letech 1941 a 1942 jako hlavní tank pro Wehrmacht. Svůj bojový debut absolvoval Panther v bitvě u Kurska; později operovaly tanky tohoto typu na všech evropských bojištích. Panther je považován za nejlepší německý tank druhé světové války. Jeho hlavní výzbrojí byl 75 mm kanón Rheinmetall-Borsig KwK 42, jehož projektilům dokázal odolat pouze těžký pancíř sovětského tanku IS-2 a amerického M26 Pershing. Barevné schéma (Potřebné barvy Humbrol): - 53, 113, 34, 93, 33, 110, 117, 160 Detaily modelu: Měřítko: 1:35 Počet dílů: 698 Délka: 247 mm Doporučeno pro děti od 10 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
1/72 Chieftain Mk.10 + Mk.11 Combo. This is an injection-plastic military vehicle model kit.The Chieftain is a second-generation main battle tank developed in the United Kingdom after World War II. Development began in the 1950s with the goal of integrating the main tank, the Centurion, and is supporting heavy tank, the Conqueror. Mass production began in May 1963. Because the British Army was skeptical of the idea of improving mobility at the expense of armor defense, the Chieftain adopted heavy armor for occupant protection and the new L11 120mm tank gun as its main armament. The main gun was powerful enough to destroy Soviet-made tanks such as the T-55 and T-62 at a distance of up to 4,000 meters.This new kit from Takom features photo-etched parts and decals for 6 versions; link-and-length tracks and assembly jig are also included. Order yours today![Includes]: Photo-etched parts, decals for 6 versions
1/72 Chieftain Mk.10 + Mk.11 Combo. This is an injection-plastic military vehicle model kit.The Chieftain is a second-generation main battle tank developed in the United Kingdom after World War II. Development began in the 1950s with the goal of integrating the main tank, the Centurion, and is supporting heavy tank, the Conqueror. Mass production began in May 1963. Because the British Army was skeptical of the idea of improving mobility at the expense of armor defense, the Chieftain adopted heavy armor for occupant protection and the new L11 120mm tank gun as its main armament. The main gun was powerful enough to destroy Soviet-made tanks such as the T-55 and T-62 at a distance of up to 4,000 meters.This new kit from Takom features photo-etched parts and decals for 6 versions; link-and-length tracks and assembly jig are also included. Order yours today![Includes]: Photo-etched parts, decals for 6 versions
1/48 Sk61 SA Bulldog trainer. The first 58 Bulldogg aircraft (known as the Sk61A and Sk61B) were delivered to the Swedish Air Force in 1971. Twenty more aircraft were delivered to the Swedish Army as Fpl61C in 1972, although these were transferred to the Air Force in 1989 as Sk61C. By 2001 all the Swedish aircraft had been withdrawn from military service. 26 were bought in 2004 by the Hungarian company AVIA-Rent. The kit is a high quality shortrun with injection moulded clear parts.
1/48 Sk61 SA Bulldog trainer. The first 58 Bulldogg aircraft (known as the Sk61A and Sk61B) were delivered to the Swedish Air Force in 1971. Twenty more aircraft were delivered to the Swedish Army as Fpl61C in 1972, although these were transferred to the Air Force in 1989 as Sk61C. By 2001 all the Swedish aircraft had been withdrawn from military service. 26 were bought in 2004 by the Hungarian company AVIA-Rent. The kit is a high quality shortrun with injection moulded clear parts.
1/48 Britten-Norman BN-2A Islander (IAF). This is an injection-plastic aircraft model kit. This beautifully detailed kit of the Britten-Norman BN-2A Islander is an entirely new mold! The prototype of this general-purpose aircraft made its first flight in 1965, and it is used by more than 500 airlines in more than 120 countries; it is still being produced (with some changes to the engine) after more than 50 years! This particular aircraft was used by more than 10 airlines, including New Japan Airlines, Daiichi Aviation, and Ryukyu Air Commuter in Japan. Includes photo-etched parts and decals for 2 versions; will be about 22.6cm long with a wingspan of 31.1cm when completed. [Mold Color]: Brown, clear [Includes]: Decals, photo-etched parts
1/48 Britten-Norman BN-2/BN-2A Islander. This is an injection-plastic aircraft model kit. This beautifully detailed kit of the Britten-Norman BN-2A Islander is an entirely new mold! The prototype of this general-purpose aircraft made its first flight in 1965, and it is used by more than 500 airlines in more than 120 countries; it is still being produced (with some changes to the engine) after more than 50 years! This particular aircraft was used by more than 10 airlines, including New Japan Airlines, Daiichi Aviation, and Ryukyu Air Commuter in Japan. Includes photo-etched parts and decals for 2 versions; will be about 22.6cm long with a wingspan of 31.1cm when completed. [Mold Color]: Brown, clear [Includes]: Decals, photo-etched parts
1/48 Britten-Norman BN-2A Islander (IAF). This is an injection-plastic aircraft model kit. This beautifully detailed kit of the Britten-Norman BN-2A Islander is an entirely new mold! The prototype of this general-purpose aircraft made its first flight in 1965, and it is used by more than 500 airlines in more than 120 countries; it is still being produced (with some changes to the engine) after more than 50 years! This particular aircraft was used by more than 10 airlines, including New Japan Airlines, Daiichi Aviation, and Ryukyu Air Commuter in Japan. Includes photo-etched parts and decals for 2 versions; will be about 22.6cm long with a wingspan of 31.1cm when completed. [Mold Color]: Brown, clear [Includes]: Decals, photo-etched parts
1/48 Britten-Norman BN-2/BN-2A Islander. This is an injection-plastic aircraft model kit. This beautifully detailed kit of the Britten-Norman BN-2A Islander is an entirely new mold! The prototype of this general-purpose aircraft made its first flight in 1965, and it is used by more than 500 airlines in more than 120 countries; it is still being produced (with some changes to the engine) after more than 50 years! This particular aircraft was used by more than 10 airlines, including New Japan Airlines, Daiichi Aviation, and Ryukyu Air Commuter in Japan. Includes photo-etched parts and decals for 2 versions; will be about 22.6cm long with a wingspan of 31.1cm when completed. [Mold Color]: Brown, clear [Includes]: Decals, photo-etched parts
1/35 T-34/85 Model 1944 No.174 Factory. The T-34 is a medium tank used mainly in the Soviet Union and members of the former Warsaw Pact during the Cold War. The T-34/85 is equipped with an 85mm tank gun in a large three-person turret, and generally the type equipped with the S-53 tank gun is classified as the 1944 type. Compared to the 1943 type, the 1944 type has a simplified design of the base of the main gun due to miniaturization of the retreat mechanism; the antenna is also installed in front of the cupola due to the relocation of the radio, and the ventilator above the turret features two units to improve the exhaust capacity. The 1944 model was mainly produced at the 183rd Factory, and in June of 1944, production started at the 174th Factory in Omsk, southern Russia. This kit from Rye Field Models includes photo-etched parts and decals for four versions. [Includes]: Photo-etched parts, decals for 4 versions
1/35 T-34/85 Model 1944 No.174 Factory. The T-34 is a medium tank used mainly in the Soviet Union and members of the former Warsaw Pact during the Cold War. The T-34/85 is equipped with an 85mm tank gun in a large three-person turret, and generally the type equipped with the S-53 tank gun is classified as the 1944 type. Compared to the 1943 type, the 1944 type has a simplified design of the base of the main gun due to miniaturization of the retreat mechanism; the antenna is also installed in front of the cupola due to the relocation of the radio, and the ventilator above the turret features two units to improve the exhaust capacity. The 1944 model was mainly produced at the 183rd Factory, and in June of 1944, production started at the 174th Factory in Omsk, southern Russia. This kit from Rye Field Models includes photo-etched parts and decals for four versions. [Includes]: Photo-etched parts, decals for 4 versions
Model Kit military 3630 - MSTA-S is a Soviet/Russian self-propelled 152mm artillery gun (1:35). Model military ke slepení. Velikost: 1:35; 37,8 cm. Počet dílků: 451. Informace o modelu: Detaily modelu: Měřítko: 1:35 Délka: 378 mm Počet dílků: 451 Doporučeno pro děti od 13 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit military 3630 - MSTA-S is a Soviet/Russian self-propelled 152mm artillery gun (1:35). Model military ke slepení. Velikost: 1:35; 37,8 cm. Počet dílků: 451. Informace o modelu: Detaily modelu: Měřítko: 1:35 Délka: 378 mm Počet dílků: 451 Doporučeno pro děti od 13 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
1/35 M60A1 Patton U.S. Army Main Battle Tank. The M60 is a main battle tank developed by the United States as a successor to the M46, M47, and M48 in order to combat the new T-54A tank fielded by the Soviet Union. The M60A1 tank is an improved mass-produced version of the M60, with production beginning in 1960, four years after the prototype of the original M60 was completed. The turret was changed from the M60's "turtleshell" shape to a thicker shape with front armor and a wider internal volume. The tank's excellent maneuverability, powerful engine and 105mm tank gun L7A1 made it an excellent tank with a good balance of offense and defense; it has become the standard main battle tank for the U.S. military and other Western countries. About 20,000 of this tank have been made, and it has become the best-selling tank. Takom's kit features a main hatch that opens and closes after assembly, with crawler belt tracks, clear and photo-etched parts, and markings for five versions. Please note that figures are not included. [Includes]: Clear parts, photo-etched parts, markings for 5 versions
1/35 M60A1 Patton U.S. Army Main Battle Tank. The M60 is a main battle tank developed by the United States as a successor to the M46, M47, and M48 in order to combat the new T-54A tank fielded by the Soviet Union. The M60A1 tank is an improved mass-produced version of the M60, with production beginning in 1960, four years after the prototype of the original M60 was completed. The turret was changed from the M60's "turtleshell" shape to a thicker shape with front armor and a wider internal volume. The tank's excellent maneuverability, powerful engine and 105mm tank gun L7A1 made it an excellent tank with a good balance of offense and defense; it has become the standard main battle tank for the U.S. military and other Western countries. About 20,000 of this tank have been made, and it has become the best-selling tank. Takom's kit features a main hatch that opens and closes after assembly, with crawler belt tracks, clear and photo-etched parts, and markings for five versions. Please note that figures are not included. [Includes]: Clear parts, photo-etched parts, markings for 5 versions