Modely
Celkem 161 produktů
Model Kit tank 6900 - Kingtiger Late Production w/New Pattern Track s.Pz.Abt.506 Ardennes 1944 (1:35. Model tanku ke slepení. Měřítko: 1:35. Informace o originálu: Detaily modelu: Měřítko: 1:35 Doporučeno pro děti od 14 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
1/72 Bf 109G-6 Wheel set (smooth and ribbed tyres). This set has been designed for the new Tamiya Bf 109G-6 model and contains two pairs of the mainwheels with their axle mounts matching the specific Tamiya leg parts. The wheels offer two styles of the tread, one being smooth and the other with the distinctive ribbed pattern. The tyres are weighted Country of origin: Germany / WWII
1/72 Bf 109G-6 Wheel set (smooth and ribbed tyres). This set has been designed for the new Tamiya Bf 109G-6 model and contains two pairs of the mainwheels with their axle mounts matching the specific Tamiya leg parts. The wheels offer two styles of the tread, one being smooth and the other with the distinctive ribbed pattern. The tyres are weighted Country of origin: Germany / WWII
1/72 Westland Sea King HC.4 Cockpit set. This set is an almost direct replacement of the kit’s rather simplified interior parts. The new resin cast interior offers substantially higher levels of detail in its new crew seats, rear cockpit bulkhead, central console and ceiling panel. Country of origin: UK / Modern
1/72 Westland Sea King HC.4 Cockpit set. This set is an almost direct replacement of the kit’s rather simplified interior parts. The new resin cast interior offers substantially higher levels of detail in its new crew seats, rear cockpit bulkhead, central console and ceiling panel. Country of origin: UK / Modern
1/72 AJ-37 Viggen Cockpit Set. For the new 1/72 Viggen kit as produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, the new resin parts directly replace the original styrene ones, no surgery required at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/72 AJ-37 Viggen Cockpit Set. For the new 1/72 Viggen kit as produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, the new resin parts directly replace the original styrene ones, no surgery required at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/72 SK-37 Viggen Cockpit Set. For the new 1/72 Viggen kit, respectively for the SK-37 two seater version produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, with the new resin parts directly replacing the original styrene ones, no surgery is needed at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/72 SK-37 Viggen Cockpit Set. For the new 1/72 Viggen kit, respectively for the SK-37 two seater version produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, with the new resin parts directly replacing the original styrene ones, no surgery is needed at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/48 Britten-Norman BN-2A Islander (IAF). This is an injection-plastic aircraft model kit. This beautifully detailed kit of the Britten-Norman BN-2A Islander is an entirely new mold! The prototype of this general-purpose aircraft made its first flight in 1965, and it is used by more than 500 airlines in more than 120 countries; it is still being produced (with some changes to the engine) after more than 50 years! This particular aircraft was used by more than 10 airlines, including New Japan Airlines, Daiichi Aviation, and Ryukyu Air Commuter in Japan. Includes photo-etched parts and decals for 2 versions; will be about 22.6cm long with a wingspan of 31.1cm when completed. [Mold Color]: Brown, clear [Includes]: Decals, photo-etched parts
1/48 Britten-Norman BN-2/BN-2A Islander. This is an injection-plastic aircraft model kit. This beautifully detailed kit of the Britten-Norman BN-2A Islander is an entirely new mold! The prototype of this general-purpose aircraft made its first flight in 1965, and it is used by more than 500 airlines in more than 120 countries; it is still being produced (with some changes to the engine) after more than 50 years! This particular aircraft was used by more than 10 airlines, including New Japan Airlines, Daiichi Aviation, and Ryukyu Air Commuter in Japan. Includes photo-etched parts and decals for 2 versions; will be about 22.6cm long with a wingspan of 31.1cm when completed. [Mold Color]: Brown, clear [Includes]: Decals, photo-etched parts
1/48 Curtiss Kittyhawk Mk.I Pacific battlefield RAAF part I. 1/48 Curtiss Kittyhawk Mk.I Pacific battlefield part I. RAAF - Royal Australian Air Force 1942-1944. (US:Curtiss P-40E). Obsahuje 4 markingy. - Curtiss Kittyhawk Mk.I, A29-382, SV-R, No. 76 Squadron, Momote, RAAF - Royal Australian Air Force, pilot by S.Ldr Leigh Bowes. - Curtiss Kittyhawk Mk.I, A29-78, IR, No. 76 Squadron, Fall River Gurney Airfield, RAAF - Royal Australian Air Force, August 1942. - Curtiss Kittyhawk Mk.I, A29-114, No. 75 Squadron, Port Moresby,New Guinea, RAAF - Royal Australian Air Force, January 1943. - Curtiss Kittyhawk Mk.I, A29-377, No. 76 Squadron, Port Moresby,New Guinea, RAAF - Royal Australian Air Force, 1943-1944.
1/48 Britten-Norman BN-2A Islander (IAF). This is an injection-plastic aircraft model kit. This beautifully detailed kit of the Britten-Norman BN-2A Islander is an entirely new mold! The prototype of this general-purpose aircraft made its first flight in 1965, and it is used by more than 500 airlines in more than 120 countries; it is still being produced (with some changes to the engine) after more than 50 years! This particular aircraft was used by more than 10 airlines, including New Japan Airlines, Daiichi Aviation, and Ryukyu Air Commuter in Japan. Includes photo-etched parts and decals for 2 versions; will be about 22.6cm long with a wingspan of 31.1cm when completed. [Mold Color]: Brown, clear [Includes]: Decals, photo-etched parts
1/48 Britten-Norman BN-2/BN-2A Islander. This is an injection-plastic aircraft model kit. This beautifully detailed kit of the Britten-Norman BN-2A Islander is an entirely new mold! The prototype of this general-purpose aircraft made its first flight in 1965, and it is used by more than 500 airlines in more than 120 countries; it is still being produced (with some changes to the engine) after more than 50 years! This particular aircraft was used by more than 10 airlines, including New Japan Airlines, Daiichi Aviation, and Ryukyu Air Commuter in Japan. Includes photo-etched parts and decals for 2 versions; will be about 22.6cm long with a wingspan of 31.1cm when completed. [Mold Color]: Brown, clear [Includes]: Decals, photo-etched parts
1/48 Curtiss Kittyhawk Mk.I Pacific battlefield RAAF part I. 1/48 Curtiss Kittyhawk Mk.I Pacific battlefield part I. RAAF - Royal Australian Air Force 1942-1944. (US:Curtiss P-40E). Obsahuje 4 markingy. - Curtiss Kittyhawk Mk.I, A29-382, SV-R, No. 76 Squadron, Momote, RAAF - Royal Australian Air Force, pilot by S.Ldr Leigh Bowes. - Curtiss Kittyhawk Mk.I, A29-78, IR, No. 76 Squadron, Fall River Gurney Airfield, RAAF - Royal Australian Air Force, August 1942. - Curtiss Kittyhawk Mk.I, A29-114, No. 75 Squadron, Port Moresby,New Guinea, RAAF - Royal Australian Air Force, January 1943. - Curtiss Kittyhawk Mk.I, A29-377, No. 76 Squadron, Port Moresby,New Guinea, RAAF - Royal Australian Air Force, 1943-1944.
Classic Kit letadlo A01005 - Mitsubishi Zero A6M2b (1:72). Model letadla ke slepení. Velikost: 1:72, 12,6 cm . Balení obsahuje: 47 dílků ke slepení. Informace o originálu: Mitsubishi A6M Zero byl dálkovým námořním stíhacím letounem, který tvořil páteř japonského námořního letectva v druhé světové válce. Se svou výjimečnou ovladatelností a také dlouhým doletem se Zero stalo nejlepším letadlem startujícím z letadlových lodí na světě, a to hned po svém debutu v Číně v roce 1940 a později také v úvodních fázích války v Tichomoří proti Spojeným státům. Barevné schéma (Potřebné barvy): A - Mitsubishi A6M2b-21 'Zero' (Zeke), 201st Kokuta, Tobera Airfield, Keravat, East New Britain, Papua New Guinea, 1944 -11, 75, 85, 15, 90 Detaily modelu: Měřítko: 1:72 Počet dílů: 47 Délka: 126 mm Rozpětí křídel: 166 mm Obtížnost: 1 Body Flying Hours: 1 Doporučeno pro děti od 8 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Classic Kit letadlo A01005 - Mitsubishi Zero A6M2b (1:72). Model letadla ke slepení. Velikost: 1:72, 12,6 cm . Balení obsahuje: 47 dílků ke slepení. Informace o originálu: Mitsubishi A6M Zero byl dálkovým námořním stíhacím letounem, který tvořil páteř japonského námořního letectva v druhé světové válce. Se svou výjimečnou ovladatelností a také dlouhým doletem se Zero stalo nejlepším letadlem startujícím z letadlových lodí na světě, a to hned po svém debutu v Číně v roce 1940 a později také v úvodních fázích války v Tichomoří proti Spojeným státům. Barevné schéma (Potřebné barvy): A - Mitsubishi A6M2b-21 'Zero' (Zeke), 201st Kokuta, Tobera Airfield, Keravat, East New Britain, Papua New Guinea, 1944 -11, 75, 85, 15, 90 Detaily modelu: Měřítko: 1:72 Počet dílů: 47 Délka: 126 mm Rozpětí křídel: 166 mm Obtížnost: 1 Body Flying Hours: 1 Doporučeno pro děti od 8 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Plastikový model letadla 1/72 Avia B-135 3 decal v. for Luftwaffe, Bulgaria. 3 decal variants1. Avia B-135 - flown on 30th March, 1944 by Jordan Ferdinandov, Bulgaria2. Avia B-135 - FVA Flugtechnische Versuchsanstalt Prag, Letnany 19403. Avia B-135 - Aviation school Dolna Mitropolya, Bulgaria, 1944During the summer of 1939, ing. Novotný and his team initiated considerable re-design and refiment of the B.35, and a new prototype, the B-135, was completed late in the year. The fuselage of the B-135 was essentially similar to that of the B.35.3, the HS 12 Ycrs engine and armament of one 20 mm cannon and two 7,7 mm machine guns were retained, as was the hydraulically-recractable main undercarriage members of the B.35.3 prototype, but a controllable-pitchairscrew was introduced, the rudder was enlarged, and an entirely new wing of all-metal construction was fitted.
Plastikový model letadla 1/72 Avia B-135 3 decal v. for Luftwaffe, Bulgaria. 3 decal variants1. Avia B-135 - flown on 30th March, 1944 by Jordan Ferdinandov, Bulgaria2. Avia B-135 - FVA Flugtechnische Versuchsanstalt Prag, Letnany 19403. Avia B-135 - Aviation school Dolna Mitropolya, Bulgaria, 1944During the summer of 1939, ing. Novotný and his team initiated considerable re-design and refiment of the B.35, and a new prototype, the B-135, was completed late in the year. The fuselage of the B-135 was essentially similar to that of the B.35.3, the HS 12 Ycrs engine and armament of one 20 mm cannon and two 7,7 mm machine guns were retained, as was the hydraulically-recractable main undercarriage members of the B.35.3 prototype, but a controllable-pitchairscrew was introduced, the rudder was enlarged, and an entirely new wing of all-metal construction was fitted.
Tamiya Putty (White). This new Tamiya Putty is perfect for filling gaps, repairing holes, or creating surface texture. It can be dissolved with separately available Tamiya Lacquer Thinner for even more varieties of application. White color means it is a better base for lighter paint colors. 32g of putty comes in aluminum tube.
1/48 N1K2-J Shiden Kai (George) - Cockpit set . Finely detailed interior set tailored to fit the new Hasegawa’s rendition (with recessed panel lines) of the George, arguably the very best fighter plane of the Japanese Navy in WW2. The set contains also a pre-painted fret with the instrument panel and seat belts. Country of origin: Japan / WWII
1/48 N1K2-J Shiden Kai (George) - Cockpit set . Finely detailed interior set tailored to fit the new Hasegawa’s rendition (with recessed panel lines) of the George, arguably the very best fighter plane of the Japanese Navy in WW2. The set contains also a pre-painted fret with the instrument panel and seat belts. Country of origin: Japan / WWII
Model Kit letadlo 1435 - HARRIER GR.1 Transatlantic Air Race 50th Ann. (1:72). Model letadla ke slepení. Velikost: 1:72; 19,3 cm. Informace o originálu: Harrier je pravděpodobně nejslavnějším letounem se schopností kolmého/krátkého vzletu a přistání ve vojenských dějinách. Navrhl ho a vyvinul britský konstruktér Hawker Siddeley v šedesátých letech. Díky svému dvouproudovému motoru Pegasus a čtyřem vertikálním tryskám pro usměrnění tahu Harrier okamžitě zaznamenal velký úspěch. Harrier Gr. 1, který hojně využívá britské Královské letectvo, je známý také tím, že vyhrál památný závod. Zúčastnil se totiž Daily Mail Trans-Atlantic Air Race mezi Londýnem a New Yorkem, který se uskutečnil v květnu roku 1969 na oslavu 50. výročí prvního přeletu Atlantského oceánu. Harrier Gr 1 zvládl uletět trasu mezi Post Office Tower v Londýně a Empire State Building v New Yorku v nejlepším celkovém čase. Informace o modelu: SKVĚLÉ OBTISKY PRO 3 VERZE - BAREVNÝ NÁVOD Barevné schéma (Doporučené barvy Italeri): - 4768AP, 4765AP, 4769AP, 4726AP, 4679AP Detaily modelu: Měřítko: 1:72 Délka: 193 mm Obtížnost: 3 Doporučeno pro děti od 14 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Model Kit letadlo 1435 - HARRIER GR.1 Transatlantic Air Race 50th Ann. (1:72). Model letadla ke slepení. Velikost: 1:72; 19,3 cm. Informace o originálu: Harrier je pravděpodobně nejslavnějším letounem se schopností kolmého/krátkého vzletu a přistání ve vojenských dějinách. Navrhl ho a vyvinul britský konstruktér Hawker Siddeley v šedesátých letech. Díky svému dvouproudovému motoru Pegasus a čtyřem vertikálním tryskám pro usměrnění tahu Harrier okamžitě zaznamenal velký úspěch. Harrier Gr. 1, který hojně využívá britské Královské letectvo, je známý také tím, že vyhrál památný závod. Zúčastnil se totiž Daily Mail Trans-Atlantic Air Race mezi Londýnem a New Yorkem, který se uskutečnil v květnu roku 1969 na oslavu 50. výročí prvního přeletu Atlantského oceánu. Harrier Gr 1 zvládl uletět trasu mezi Post Office Tower v Londýně a Empire State Building v New Yorku v nejlepším celkovém čase. Informace o modelu: SKVĚLÉ OBTISKY PRO 3 VERZE - BAREVNÝ NÁVOD Barevné schéma (Doporučené barvy Italeri): - 4768AP, 4765AP, 4769AP, 4726AP, 4679AP Detaily modelu: Měřítko: 1:72 Délka: 193 mm Obtížnost: 3 Doporučeno pro děti od 14 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
1/72 Chieftain Mk.10 + Mk.11 Combo. This is an injection-plastic military vehicle model kit.The Chieftain is a second-generation main battle tank developed in the United Kingdom after World War II. Development began in the 1950s with the goal of integrating the main tank, the Centurion, and is supporting heavy tank, the Conqueror. Mass production began in May 1963. Because the British Army was skeptical of the idea of improving mobility at the expense of armor defense, the Chieftain adopted heavy armor for occupant protection and the new L11 120mm tank gun as its main armament. The main gun was powerful enough to destroy Soviet-made tanks such as the T-55 and T-62 at a distance of up to 4,000 meters.This new kit from Takom features photo-etched parts and decals for 6 versions; link-and-length tracks and assembly jig are also included. Order yours today![Includes]: Photo-etched parts, decals for 6 versions
1/72 Chieftain Mk.10 + Mk.11 Combo. This is an injection-plastic military vehicle model kit.The Chieftain is a second-generation main battle tank developed in the United Kingdom after World War II. Development began in the 1950s with the goal of integrating the main tank, the Centurion, and is supporting heavy tank, the Conqueror. Mass production began in May 1963. Because the British Army was skeptical of the idea of improving mobility at the expense of armor defense, the Chieftain adopted heavy armor for occupant protection and the new L11 120mm tank gun as its main armament. The main gun was powerful enough to destroy Soviet-made tanks such as the T-55 and T-62 at a distance of up to 4,000 meters.This new kit from Takom features photo-etched parts and decals for 6 versions; link-and-length tracks and assembly jig are also included. Order yours today![Includes]: Photo-etched parts, decals for 6 versions
1/35 WWII British MG Team in Combat. DESCRIPTION This is an injection-plastic figure set for use with military dioramas or individual display. To go along with their new line of A10 MKII Cruiser tanks, Gecko Models brings us this interesting-looking set of British machine gunner figures! Includes parts to build 5 figures, weapons and equipment; comes with photo-etched parts and decals.
1/48 Blenheim Mk.I/II Finish AF 1st serie Ski Undercarriage – fixed type . During the long winter months, the Finnish military operated both the original British and indigenously-built Blenheim aircraft with two styles of ski undercarriage. The fixed type offered in this set was mounted directly into the undercarriage nacelles. The resin parts have been designed to fit the new Blenheim model produced by Airfix. Country of origin: Finland / WWII
1/48 Blenheim Mk.I/II Finish AF 1st serie Ski Undercarriage – fixed type . During the long winter months, the Finnish military operated both the original British and indigenously-built Blenheim aircraft with two styles of ski undercarriage. The fixed type offered in this set was mounted directly into the undercarriage nacelles. The resin parts have been designed to fit the new Blenheim model produced by Airfix. Country of origin: Finland / WWII
Plastikový model letadla 1/72 DH.100 Vampire Mk.I RAF, RAAF and Armée de l. The kit’s plastic parts come on three grey styrene sprues and two clear sprues which are accompanied by a fret of photo-etches. The first clear sprue offers the standard, late type of the clear hood and also the original, early style canopy typical for the first Mk.Is. This part, however, was not manufactured to our standards, which we regret of course, and thus we have decided to rework the design completely and produce a second sprue with much more exact rendition of the early hood. The decal sheet contains markings for three RAF machines which differ by having various national markings on them, another machine with serial A78-1which was flown by the RAAF down under and the final option brings a very special French machine, in fact a remotely controlled drone named Porthos Originally, the Vampire Mk.I kit was to offer schemes for just two operators of the type, the RAF and RAAF. It has been decided, however, that a new marking option will be offered in this boxing to make it more attractive for a wider range of modellers. The new addition to the kit is a quite eye-catching machine wearing French colours and the title of this boxing has also been updated.
Plastikový model letadla 1/72 DH.100 Vampire Mk.I RAF, RAAF and Armée de l. The kit’s plastic parts come on three grey styrene sprues and two clear sprues which are accompanied by a fret of photo-etches. The first clear sprue offers the standard, late type of the clear hood and also the original, early style canopy typical for the first Mk.Is. This part, however, was not manufactured to our standards, which we regret of course, and thus we have decided to rework the design completely and produce a second sprue with much more exact rendition of the early hood. The decal sheet contains markings for three RAF machines which differ by having various national markings on them, another machine with serial A78-1which was flown by the RAAF down under and the final option brings a very special French machine, in fact a remotely controlled drone named Porthos Originally, the Vampire Mk.I kit was to offer schemes for just two operators of the type, the RAF and RAAF. It has been decided, however, that a new marking option will be offered in this boxing to make it more attractive for a wider range of modellers. The new addition to the kit is a quite eye-catching machine wearing French colours and the title of this boxing has also been updated.
Modelset letadlo 63942 - Airbus A320 neo Lufthansa (1:144). Model letadla Airbus A320 neo Lufthansa ke slepení. Měřítko: 1:144; velikost: 261 mm. Balení obsahuje: 38 dílků, obtížnost: 3 Informace o modelu: Detaily modelu: Měřítko: 1:144 Počet dílů: 38 Délka: 261 mm Rozpětí křídel: 235 mm Obtížnost: 3 Popis: A320neo je poslední přírůstek do úspěšné rodiny Airbusů krátkého a středního doletu. Neo znamená "new engine option" a je synonymem pro nové moderní motory. jeden z prvních zákazníku byla německá Lufthansa, která samozřejmě na letadle prezentuje svůj nový design. UPOZORNĚNÍ: Doporučeno pro děti od 8 let. Používat pouze pod dozorem dospělé osoby. UPOZORNĚNÍ: Přiloženo lepidlo obsahující rozpouštědla a vodou ředitelné barvy. Před použitím čtěte instrukce, dodržujte je a uschovejte k dalšímu použití. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
3D Puzzle REVELL 00114 - Statue of Liberty. Socha Svobody, počet dílků 31, délka: 160 mm, šířka: 160 mm, výška: 190 mm Detaily modelu: Počet dílků: 31 Délka: 160 mm Šířka: 160 mm Výška: 190mm Popis: Socha Svobody byla původně dárek od Francie pro Ameriku a nachází se na ostrově Svobody v přístavě New York. Od jejího uvedení v roce 1886 zde stála jakožto univerzálnní symbol svobody, vítající všechny imigranty přicházející do Ameriky. Zábavná práce pro madší i starší! S Revell 3D puzzle můžete postavit světoznámé budovy, působivá panorama nebo legendární vozidla, jakožto 3D modely pro každého. Precizně děrované pěnové komponenty umožňující snadné smontování - žádné lepidlo ani nářadí není potřeba. V závislosti na velikosti a složitosti modelu můžete stavěním strávit buď pár minut a nebo až několik hodin. NEVHODNÉ PRO DĚTI DO 3 LET
3D Puzzle REVELL 00114 - Statue of Liberty. Socha Svobody, počet dílků 31, délka: 160 mm, šířka: 160 mm, výška: 190 mm Detaily modelu: Počet dílků: 31 Délka: 160 mm Šířka: 160 mm Výška: 190mm Popis: Socha Svobody byla původně dárek od Francie pro Ameriku a nachází se na ostrově Svobody v přístavě New York. Od jejího uvedení v roce 1886 zde stála jakožto univerzálnní symbol svobody, vítající všechny imigranty přicházející do Ameriky. Zábavná práce pro madší i starší! S Revell 3D puzzle můžete postavit světoznámé budovy, působivá panorama nebo legendární vozidla, jakožto 3D modely pro každého. Precizně děrované pěnové komponenty umožňující snadné smontování - žádné lepidlo ani nářadí není potřeba. V závislosti na velikosti a složitosti modelu můžete stavěním strávit buď pár minut a nebo až několik hodin. NEVHODNÉ PRO DĚTI DO 3 LET
Modelset letadlo 63942 - Airbus A320 neo Lufthansa (1:144). Model letadla Airbus A320 neo Lufthansa ke slepení. Měřítko: 1:144; velikost: 261 mm. Balení obsahuje: 38 dílků, obtížnost: 3 Informace o modelu: Detaily modelu: Měřítko: 1:144 Počet dílů: 38 Délka: 261 mm Rozpětí křídel: 235 mm Obtížnost: 3 Popis: A320neo je poslední přírůstek do úspěšné rodiny Airbusů krátkého a středního doletu. Neo znamená "new engine option" a je synonymem pro nové moderní motory. jeden z prvních zákazníku byla německá Lufthansa, která samozřejmě na letadle prezentuje svůj nový design. UPOZORNĚNÍ: Doporučeno pro děti od 8 let. Používat pouze pod dozorem dospělé osoby. UPOZORNĚNÍ: Přiloženo lepidlo obsahující rozpouštědla a vodou ředitelné barvy. Před použitím čtěte instrukce, dodržujte je a uschovejte k dalšímu použití. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
1/72 Blackburn Firebrand TF.Mk.5. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.5. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.IV. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. The Firebrand TF Mk.IV featured a 2,520bhp Centaurus IX or Centaurus 57 engine. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.IV. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. The Firebrand TF Mk.IV featured a 2,520bhp Centaurus IX or Centaurus 57 engine. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions