Modely
Celkem 99 produktů
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/76 Humber Mk. II - Revell. Model military ke slepení. Velikost: 1:76; 6,5 cm. Balení obsahuje: 65 dílků ke slepení. Informace o modelu a originálu: Humber Mk.II bylo britské druhoválečné obrněné průzkumné vozidlo, jehož výroba započala v roce 1941. První ostré nasazení těchto obrněnců proběhlo při bojích v severní Africe. Později byla vozidla použita i na evropském bojišti, kde ho měla ve své výzbroji i 1. čs. obrněná brigáda. Po druhé světové válce se Humbery rozšířily do různých zemí světa, přičemž jimi disponovala i Československá armáda. Celkem bylo vyrobeno 3652 exemplářů. - Obsahuje 1 figurku - Otočná věž - Další vybavení: kanystry, plachty, boxy - Diorama s jezírkem a zničeným domem Potřebné barvy: - základní: 117, 135, 152, 178, 182, 186, 188, 109, 190 - další: Detaily modelu: Měřítko: 1:76 Počet dílů: 65 Délka: 65 mm Obtížnost: 4 Doporučeno pro děti od 12 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
1/76 Humber Mk. II - Revell. Model military ke slepení. Velikost: 1:76; 6,5 cm. Balení obsahuje: 65 dílků ke slepení. Informace o modelu a originálu: Humber Mk.II bylo britské druhoválečné obrněné průzkumné vozidlo, jehož výroba započala v roce 1941. První ostré nasazení těchto obrněnců proběhlo při bojích v severní Africe. Později byla vozidla použita i na evropském bojišti, kde ho měla ve své výzbroji i 1. čs. obrněná brigáda. Po druhé světové válce se Humbery rozšířily do různých zemí světa, přičemž jimi disponovala i Československá armáda. Celkem bylo vyrobeno 3652 exemplářů. - Obsahuje 1 figurku - Otočná věž - Další vybavení: kanystry, plachty, boxy - Diorama s jezírkem a zničeným domem Potřebné barvy: - základní: 117, 135, 152, 178, 182, 186, 188, 109, 190 - další: Detaily modelu: Měřítko: 1:76 Počet dílů: 65 Délka: 65 mm Obtížnost: 4 Doporučeno pro děti od 12 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
1/72 A-20 Havoc/Wing Racks and Bombs. The A-20 Havoc bombers of the USAAF, and mainly those flown over Europe, were able to carry their bomb load not just internally in the fuselage bomb bays, but under their wings too, using specially designed bomb racks. These racks were uniquely shaped and braced on one side to the wings This set is designed to fit any of the Special Hobby/MPM A-20s, offers the racks as well as the bombs and consists of resin and photo etched parts Operators: USA/WWII, post-WWII
1/72 A-20 Havoc/Wing Racks and Bombs. The A-20 Havoc bombers of the USAAF, and mainly those flown over Europe, were able to carry their bomb load not just internally in the fuselage bomb bays, but under their wings too, using specially designed bomb racks. These racks were uniquely shaped and braced on one side to the wings This set is designed to fit any of the Special Hobby/MPM A-20s, offers the racks as well as the bombs and consists of resin and photo etched parts Operators: USA/WWII, post-WWII
1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/48 Blenheim Mk.I Engine Intakes. The Mercury engine which were fitted to the Blenheim had a specific feature, the tubular air intakes mounted between the engine cylinders. There were two styles, one plain, the other with funnel-shaped front end, both of which we offer in this set. There are also the lower cowl air intakes added to this set, they are desingned as one-piece item which directly replace the kit intakes, offer better details and do not require to be glued and filled. Designed for Airfix kit. Country of origin: UK / WWII
1/48 Blenheim Mk.I Engine Intakes. The Mercury engine which were fitted to the Blenheim had a specific feature, the tubular air intakes mounted between the engine cylinders. There were two styles, one plain, the other with funnel-shaped front end, both of which we offer in this set. There are also the lower cowl air intakes added to this set, they are desingned as one-piece item which directly replace the kit intakes, offer better details and do not require to be glued and filled. Designed for Airfix kit. Country of origin: UK / WWII
