Modely
Celkem 849 produktů
1/72 SK-37 Viggen Cockpit Set. For the new 1/72 Viggen kit, respectively for the SK-37 two seater version produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, with the new resin parts directly replacing the original styrene ones, no surgery is needed at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/48 MD-3 Ground Power Unit. The MD-3 ground power unit was used throughout the 50s and 60s to generate electric power for starting up engines of such USAF aircraft as were the B-47, T-33 and many other with the same power requirements. The master parts of our kit have been 3D designed and produced on a 3D printer. The set also contains a PE fret and a sheet of decals. Operators: USA/modern
1/48 MD-3 Ground Power Unit. The MD-3 ground power unit was used throughout the 50s and 60s to generate electric power for starting up engines of such USAF aircraft as were the B-47, T-33 and many other with the same power requirements. The master parts of our kit have been 3D designed and produced on a 3D printer. The set also contains a PE fret and a sheet of decals. Operators: USA/modern
1/72 SK-37 Viggen Cockpit Set. For the new 1/72 Viggen kit, respectively for the SK-37 two seater version produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, with the new resin parts directly replacing the original styrene ones, no surgery is needed at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 RAF FE.2b - Fabric Seat Belts - 2 sets Wingnut Wings. Textile seat belts designed for aircraft RAF FE.2b by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/72 AJ-37 Viggen Cockpit Set. For the new 1/72 Viggen kit as produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, the new resin parts directly replace the original styrene ones, no surgery required at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/72 AJ-37 Viggen Cockpit Set. For the new 1/72 Viggen kit as produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, the new resin parts directly replace the original styrene ones, no surgery required at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/72 Blackburn Firebrand TF.Mk.IV. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. The Firebrand TF Mk.IV featured a 2,520bhp Centaurus IX or Centaurus 57 engine. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.IV. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. The Firebrand TF Mk.IV featured a 2,520bhp Centaurus IX or Centaurus 57 engine. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Curtiss Kittyhawk Mk.III "Desert Harassers" North Africa / Italy 1942-1944 part II. 1/48 Curtiss Kittyhawk Mk.III "The Desert Harassers" part II. RAAF - Royal Australian Air Force in North African campaign 1942-1944. Obsahuje 4 markingy. - Curtiss Kittyhawk Mk.III, OK-D, FR853, No. 450 Squadron, Italy, Royal Australian Air Force 1944 - Curtiss Kittyhawk Mk.III, OK-F, FR248, No. 450 Squadron, Libya, Royal Australian Air Force 1944 - Curtiss Kittyhawk Mk.III, CV-O, AK961, No. 3 Squadron, Lybia, Royal Australian Air Force 1942 - Curtiss Kittyhawk Mk.III, CV-Z, FS407, No. 3 Squadron, Foggia, Italy, Royal Australian Air Force 1943
1/72 Curtiss Kittyhawk Mk.III "Desert Harassers" North Africa / Italy 1942-1944 part II. 1/48 Curtiss Kittyhawk Mk.III "The Desert Harassers" part II. RAAF - Royal Australian Air Force in North African campaign 1942-1944. Obsahuje 4 markingy. - Curtiss Kittyhawk Mk.III, OK-D, FR853, No. 450 Squadron, Italy, Royal Australian Air Force 1944 - Curtiss Kittyhawk Mk.III, OK-F, FR248, No. 450 Squadron, Libya, Royal Australian Air Force 1944 - Curtiss Kittyhawk Mk.III, CV-O, AK961, No. 3 Squadron, Lybia, Royal Australian Air Force 1942 - Curtiss Kittyhawk Mk.III, CV-Z, FS407, No. 3 Squadron, Foggia, Italy, Royal Australian Air Force 1943
Bavlněná rouška s kapsou bílá / Cotton Face Mask with Filter pocket-White. Important: The mask should be washed at 90 ° C before first use. This will improve the protective properties and hygiene of the cotton. The mask is made of 100% cotton and is made of 2 layers of cotton with a filter pocket. We offer a maximum of 8 pieces per order for colleagues who do not have the opportunity or time to make masks themselves. The masks are sewn by a small clothing company from Liberec, which can continue to provide work for its employees, women and wives of friends and colleagues. We offer masks to support small business and they are not for our enrichment.
1/72 Blackburn Firebrand TF.Mk.5. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.5. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
Plastikový model letadla 1/72 JA-37 Viggen. Model of the second generation of the Viggen fighter aircraft which featured longer fuselage and more powerful engine. Content of the kit: eight parts on styrene sprues, one clear styrene sprue, full colour instruction booklet, a sheet of decals highly accurate and finely detailed model, the top notch 1/72 Viggen currently on the market decals cater for three machines one of which sports eyecatching anniversary scheme with red tail fin and a rider on it. wide range of detail sets and figures with ladders available. Country of origin: Sweden / modern
Plastikový model letadla 1/72 JA-37 Viggen. Model of the second generation of the Viggen fighter aircraft which featured longer fuselage and more powerful engine. Content of the kit: eight parts on styrene sprues, one clear styrene sprue, full colour instruction booklet, a sheet of decals highly accurate and finely detailed model, the top notch 1/72 Viggen currently on the market decals cater for three machines one of which sports eyecatching anniversary scheme with red tail fin and a rider on it. wide range of detail sets and figures with ladders available. Country of origin: Sweden / modern
Plastikový model letadla 1/72 SF-37 Viggen ‘Swedish Eyes’. Reconnaissance version of the Viggen aeroplane, can be distinguished from all the others by having a different-shaped nose section carrying photographic cameras instead of radar equipment. superbly detailed and really accurate model decals for three machines including the anniversary airframe with a painting of the lone wolf on its tail wide range of detail resin sets, pilot figures and pre-cut canopy masks available too
Plastikový model letadla 1/72 SF-37 Viggen ‘Swedish Eyes’. Reconnaissance version of the Viggen aeroplane, can be distinguished from all the others by having a different-shaped nose section carrying photographic cameras instead of radar equipment. superbly detailed and really accurate model decals for three machines including the anniversary airframe with a painting of the lone wolf on its tail wide range of detail resin sets, pilot figures and pre-cut canopy masks available too
1/48 Curtiss Kittyhawk Mk.III "Desert Harassers" North Africa / Italy 1942-1944 part II. 1/48 Curtiss Kittyhawk Mk.III "The Desert Harassers" part II. RAAF - Royal Australian Air Force in North African campaign 1942-1944. Obsahuje 4 markingy. - Curtiss Kittyhawk Mk.III, OK-D, FR853, No. 450 Squadron, Italy, Royal Australian Air Force 1944 - Curtiss Kittyhawk Mk.III, OK-F, FR248, No. 450 Squadron, Libya, Royal Australian Air Force 1944 - Curtiss Kittyhawk Mk.III, CV-O, AK961, No. 3 Squadron, Lybia, Royal Australian Air Force 1942 - Curtiss Kittyhawk Mk.III, CV-Z, FS407, No. 3 Squadron, Foggia, Italy, Royal Australian Air Force 1943
1/48 Curtiss Kittyhawk Mk.III "Desert Harassers" North Africa / Italy 1942-1944 part II. 1/48 Curtiss Kittyhawk Mk.III "The Desert Harassers" part II. RAAF - Royal Australian Air Force in North African campaign 1942-1944. Obsahuje 4 markingy. - Curtiss Kittyhawk Mk.III, OK-D, FR853, No. 450 Squadron, Italy, Royal Australian Air Force 1944 - Curtiss Kittyhawk Mk.III, OK-F, FR248, No. 450 Squadron, Libya, Royal Australian Air Force 1944 - Curtiss Kittyhawk Mk.III, CV-O, AK961, No. 3 Squadron, Lybia, Royal Australian Air Force 1942 - Curtiss Kittyhawk Mk.III, CV-Z, FS407, No. 3 Squadron, Foggia, Italy, Royal Australian Air Force 1943
1/48 P-61B Nose Art. Northrop P-61 Black Widow, pojmenovaný po severoamerickém pavoukovi, byl prvním operačním americkým válečným letounem určeným pro noční stíhání a prvním letounem, který používal radar. P-61 měl tříčlennou posádku: pilota, střelce a obsluhu radaru. Byl vyzbrojen čtyřmi 20mm (.79 in) kanóny Hispano M2 s přední střelbou umístěnými ve spodní části trupu a čtyřmi kulomety M2 Browning ráže .50 in (12,7 mm) umístěnými v dálkově ovládané hřbetní střelecké věži. Jednalo se o celokovovou dvoumotorovou dvouplošnou konstrukci vyvinutou během druhé světové války. První zkušební let se uskutečnil 26. května 1942, první sériový letoun sjel z montážní linky v říjnu 1943. Poslední letoun byl vyřazen z vládní služby v roce 1954. Přestože se Black Widow nevyráběl ve velkých počtech jako jeho současníci, byl během druhé světové války účinně provozován jako noční stíhač letkami armádního letectva Spojených států v evropském divadle, tichomořském divadle, čínsko-barmském indickém divadle a středomořském divadle. Nahradil dřívější noční stíhací letouny britské konstrukce, které byly modernizovány tak, aby obsahovaly radar, když byl k dispozici. Po válce sloužil P-61 - přeznačený na F-61 - v letectvu Spojených států jako dálkový, denní a noční stíhací letoun pro Velitelství protivzdušné obrany do roku 1948 a pro Pátou leteckou armádu do roku 1950. V noci na 14. srpna 1945 si letoun P-61B 548. noční stíhací perutě s názvem Lady in the Dark neoficiálně připsal poslední spojenecké letecké vítězství před Dnem VJ. P-61 byl také upraven pro vytvoření fotoprůzkumného letounu F-15 Reporter pro armádní letectvo Spojených států a následně používán letectvem Spojených států. Nesložený a nenabarvený plastikový model. K úspěšnému dokončení této stavebnice je zapotřebí dokoupit barvy, lepidlo na plastikové modely, ředidlo, štětce, které nejsou součástí balení.
1/48 P-61B Nose Art. Northrop P-61 Black Widow, pojmenovaný po severoamerickém pavoukovi, byl prvním operačním americkým válečným letounem určeným pro noční stíhání a prvním letounem, který používal radar. P-61 měl tříčlennou posádku: pilota, střelce a obsluhu radaru. Byl vyzbrojen čtyřmi 20mm (.79 in) kanóny Hispano M2 s přední střelbou umístěnými ve spodní části trupu a čtyřmi kulomety M2 Browning ráže .50 in (12,7 mm) umístěnými v dálkově ovládané hřbetní střelecké věži. Jednalo se o celokovovou dvoumotorovou dvouplošnou konstrukci vyvinutou během druhé světové války. První zkušební let se uskutečnil 26. května 1942, první sériový letoun sjel z montážní linky v říjnu 1943. Poslední letoun byl vyřazen z vládní služby v roce 1954. Přestože se Black Widow nevyráběl ve velkých počtech jako jeho současníci, byl během druhé světové války účinně provozován jako noční stíhač letkami armádního letectva Spojených států v evropském divadle, tichomořském divadle, čínsko-barmském indickém divadle a středomořském divadle. Nahradil dřívější noční stíhací letouny britské konstrukce, které byly modernizovány tak, aby obsahovaly radar, když byl k dispozici. Po válce sloužil P-61 - přeznačený na F-61 - v letectvu Spojených států jako dálkový, denní a noční stíhací letoun pro Velitelství protivzdušné obrany do roku 1948 a pro Pátou leteckou armádu do roku 1950. V noci na 14. srpna 1945 si letoun P-61B 548. noční stíhací perutě s názvem Lady in the Dark neoficiálně připsal poslední spojenecké letecké vítězství před Dnem VJ. P-61 byl také upraven pro vytvoření fotoprůzkumného letounu F-15 Reporter pro armádní letectvo Spojených států a následně používán letectvem Spojených států. Nesložený a nenabarvený plastikový model. K úspěšnému dokončení této stavebnice je zapotřebí dokoupit barvy, lepidlo na plastikové modely, ředidlo, štětce, které nejsou součástí balení.
Plastikový model letadla 1/72 Morane Saulnier MS-410C.1. Model of the French WW2 fighter plane, an improved and more powerful version of the MS-406. Contents of the box: three styrene sprues, one clear, resin cast parts, photo etches, full colour instructions, decals. finely detailed model decals offer markings for one French machine and four Finnish, all of which wearing eye-catching schemes. two styles of the wings. Country of origin: France, Finland / WWII
Plastikový model letadla 1/72 Morane Saulnier MS-410C.1. Model of the French WW2 fighter plane, an improved and more powerful version of the MS-406. Contents of the box: three styrene sprues, one clear, resin cast parts, photo etches, full colour instructions, decals. finely detailed model decals offer markings for one French machine and four Finnish, all of which wearing eye-catching schemes. two styles of the wings. Country of origin: France, Finland / WWII
1/48 AJ-37/JA-37 Viggen Pilot Climbing Ladder into Cockpit for Special Hobby/Tarangus kit. Nicely detailed polyurethane resin cast figure of a Viggen pilot depicted climbing into the cockpit using a styrene ladder. The ladder comes from a standard metal type mould. A fine accompaniment to a sitting instructor/radar operator figure and any two-seater version of the Viggen. Nationality: Sweden / modern
1/48 Curtiss Kittyhawk Mk.I / Mk.II "Desert Harassers" 1942-1944 part I. 1/48 Curtiss Kittyhawk Mk.I / Mk.II "The Desert Harassers" part I. RAAF - Royal Australian Air Force in North African campaign 1942-1944. Obsahuje 4 markingy. - Curtiss Kittyhawk Mk I, OK-K, FX 515, No. 450 Squadron, Libya, Royal Australian Air Force 1943. - Curtiss Kittyhawk Mk I, OK-M, AK 634, No. 450 Squadron, Libya, Royal Australian Air Force 1942. - Curtiss Kittyhawk Mk II, CV-V, AK 961, RAAF - Royal Australian Air Force, pilot by commander No. 3 Squadron, Sqn. Ldr. Brian Easton, Cuttela airfield, Italy 1944. - Curtiss Kittyhawk Mk II, CV-V, FL 308, No. 3 Squadron, RAAF - Royal Australian Air Force, pilot by Sqn. Ldr. Bobby Gibbes, Egypt, August-September 1942.
1/48 Curtiss Kittyhawk Mk.I / Mk.II "Desert Harassers" 1942-1944 part I. 1/48 Curtiss Kittyhawk Mk.I / Mk.II "The Desert Harassers" part I. RAAF - Royal Australian Air Force in North African campaign 1942-1944. Obsahuje 4 markingy. - Curtiss Kittyhawk Mk I, OK-K, FX 515, No. 450 Squadron, Libya, Royal Australian Air Force 1943. - Curtiss Kittyhawk Mk I, OK-M, AK 634, No. 450 Squadron, Libya, Royal Australian Air Force 1942. - Curtiss Kittyhawk Mk II, CV-V, AK 961, RAAF - Royal Australian Air Force, pilot by commander No. 3 Squadron, Sqn. Ldr. Brian Easton, Cuttela airfield, Italy 1944. - Curtiss Kittyhawk Mk II, CV-V, FL 308, No. 3 Squadron, RAAF - Royal Australian Air Force, pilot by Sqn. Ldr. Bobby Gibbes, Egypt, August-September 1942.
1/72 Curtiss Kittyhawk Mk.I / Mk.II "Desert Harassers" 1942-1944 part I. 1/72 Curtiss Kittyhawk Mk.I / Mk.II "The Desert Harassers" part I. RAAF - Royal Australian Air Force in north Africa campaign 1942-1944. Obsahuje 4 markingy. - Curtiss Kittyhawk Mk I, OK-K, FX 515, No. 450 Squadron, Libya, Royal Australian Air Force 1943 - Curtiss Kittyhawk Mk I, OK-M, AK 634, No. 450 Squadron, Libya, Royal Australian Air Force 1942 - Curtiss Kittyhawk Mk II, CV-V, AK 961, RAAF - Royal Australian Air Force, pilot by commander No. 3 Squadron, Sqn. Ldr. Brian Easton, Cuttela airfield, Italy 1944 - Curtiss Kittyhawk Mk II, CV-V, FL 308, No. 3 Squadron, RAAF - Royal Australian Air Force, pilot by Sqn. Ldr. Bobby Gibbes, Egypt, August-September 1942
1/72 Curtiss Kittyhawk Mk.I / Mk.II "Desert Harassers" 1942-1944 part I. 1/72 Curtiss Kittyhawk Mk.I / Mk.II "The Desert Harassers" part I. RAAF - Royal Australian Air Force in north Africa campaign 1942-1944. Obsahuje 4 markingy. - Curtiss Kittyhawk Mk I, OK-K, FX 515, No. 450 Squadron, Libya, Royal Australian Air Force 1943 - Curtiss Kittyhawk Mk I, OK-M, AK 634, No. 450 Squadron, Libya, Royal Australian Air Force 1942 - Curtiss Kittyhawk Mk II, CV-V, AK 961, RAAF - Royal Australian Air Force, pilot by commander No. 3 Squadron, Sqn. Ldr. Brian Easton, Cuttela airfield, Italy 1944 - Curtiss Kittyhawk Mk II, CV-V, FL 308, No. 3 Squadron, RAAF - Royal Australian Air Force, pilot by Sqn. Ldr. Bobby Gibbes, Egypt, August-September 1942
Paint Killer - Color Remover 100ml. This paint remover removes all X-and XV-paints, AS- and TS-spray colours, PC- and PS-lexan colours, as well as all other paint systems up to 2-K paints. The hammer is, that the paints are removed without harming the carrying material like plastic, lexan, resin, metal or model windows. Trials have shown, that even 10-year old Tamiya color acrylic paint paints can be easily removed from tanks, planes or similar models. This means that annoying little paint accidents from the past can be easily corrected. Of course, older polycarbonate-colours can be removed, too.Content: 100 ml. Warning! Not suitable for children under 14 years.
Plastikový model letadla 1/72 Bloch MB-155 5 decal v. for France, Luftwaffe. The Bloch MB.152 proved the definitive production model with nearly 500 produced. This version was powered by a Gnome-Rhone 14N-25/-49 series air cooled radial piston engine outputting at 1,100 horsepower depending on fitting. This was coupled to a three-bladed variable fixed propeller assembly. The combination supplied the aircraft with a top speed of 316 miles per hour with a range of 370 miles and service ceiling of 32,800 feet. 5 decal variants1. MB-155, No. 703, GC-1, Lt. Lefeuvre, Toulouse, June 19402. MB-155, No. 700, first prototype, France, December 19393. MB-155, No. 704, CO of 1 Escadrille, Capt. Coutaud, Agen, Algeria, June 19404. MB-155, No. 708, GC II/8, Vichy France Air-Force, 19415. MB-155, JG103, Luftwaffe, France 1943
Plastikový model letadla 1/72 Airspeed Envoy 4 decal v. for Spain, Nanking, RAF. Pilot and eight-passenger enlarged and twin-engined development of the AS.5 Courier. First flown on 26 June 1934. About 50 built by Airspeed for British, Japanese, Czechoslovakian, Chinese and South African civil operators, plus a small number for the South African Air Force and the RAF (SAAF Envoys carrying bombs and one forward-firing and one dorsal-turreted machine-gun). Mitsubishi also built a number under licence. Engines fitted to Envoys included the Wolseley AR.9, Scorpio I or Aries III, Armstrong Siddeley Lynx IVC or Cheetah IX, Wright Whirlwind R.760 and Walter Castor II. 4 decal variants1. AS.6J, RAF, 19402. AS.6J, Spanish Nationalist, 19363. AS.6J, Spanish Republicans, 19364. AS.6J, Kwangsi Air Force, 1937
Plastikový model letadla 1/72 Bloch MB-155 5 decal v. for France, Luftwaffe. The Bloch MB.152 proved the definitive production model with nearly 500 produced. This version was powered by a Gnome-Rhone 14N-25/-49 series air cooled radial piston engine outputting at 1,100 horsepower depending on fitting. This was coupled to a three-bladed variable fixed propeller assembly. The combination supplied the aircraft with a top speed of 316 miles per hour with a range of 370 miles and service ceiling of 32,800 feet. 5 decal variants1. MB-155, No. 703, GC-1, Lt. Lefeuvre, Toulouse, June 19402. MB-155, No. 700, first prototype, France, December 19393. MB-155, No. 704, CO of 1 Escadrille, Capt. Coutaud, Agen, Algeria, June 19404. MB-155, No. 708, GC II/8, Vichy France Air-Force, 19415. MB-155, JG103, Luftwaffe, France 1943
Plastikový model letadla 1/72 Airspeed Envoy 4 decal v. for Spain, Nanking, RAF. Pilot and eight-passenger enlarged and twin-engined development of the AS.5 Courier. First flown on 26 June 1934. About 50 built by Airspeed for British, Japanese, Czechoslovakian, Chinese and South African civil operators, plus a small number for the South African Air Force and the RAF (SAAF Envoys carrying bombs and one forward-firing and one dorsal-turreted machine-gun). Mitsubishi also built a number under licence. Engines fitted to Envoys included the Wolseley AR.9, Scorpio I or Aries III, Armstrong Siddeley Lynx IVC or Cheetah IX, Wright Whirlwind R.760 and Walter Castor II. 4 decal variants1. AS.6J, RAF, 19402. AS.6J, Spanish Nationalist, 19363. AS.6J, Spanish Republicans, 19364. AS.6J, Kwangsi Air Force, 1937
