Hračky

1/72 Firebee BQM-34

1/72 Firebee BQM-34. PLASTIC MOULDED KITS inclusive of racks for A/B-26 Invader, P2V Neptune and C-130 Hercules

1/72 Blackburn Firebrand TF.Mk.5 (FAA, 827 Sqn)

1/72 Blackburn Firebrand TF.Mk.5 (FAA, 827 Sqn). 4 sprues, vacu canopy, resin parts decal for two markings, (no resins)

1/72 Blackburn Firebrand TF.Mk.5 (FAA, 827 Sqn)

1/72 Blackburn Firebrand TF.Mk.5 (FAA, 827 Sqn). 4 sprues, vacu canopy, resin parts decal for two markings, (no resins)

1/72 Firebee BQM-34

1/72 Firebee BQM-34. PLASTIC MOULDED KITS inclusive of racks for A/B-26 Invader, P2V Neptune and C-130 Hercules

Plastikový model letadla 1/72 DH.100 Vampire Mk.I RAF, RAAF and Armée de l

Plastikový model letadla 1/72 DH.100 Vampire Mk.I RAF, RAAF and Armée de l. The kit’s plastic parts come on three grey styrene sprues and two clear sprues which are accompanied by a fret of photo-etches. The first clear sprue offers the standard, late type of the clear hood and also the original, early style canopy typical for the first Mk.Is. This part, however, was not manufactured to our standards, which we regret of course, and thus we have decided to rework the design completely and produce a second sprue with much more exact rendition of the early hood. The decal sheet contains markings for three RAF machines which differ by having various national markings on them, another machine with serial A78-1which was flown by the RAAF down under and the final option brings a very special French machine, in fact a remotely controlled drone named Porthos Originally, the Vampire Mk.I kit was to offer schemes for just two operators of the type, the RAF and RAAF. It has been decided, however, that a new marking option will be offered in this boxing to make it more attractive for a wider range of modellers. The new addition to the kit is a quite eye-catching machine wearing French colours and the title of this boxing has also been updated.

Plastikový model letadla 1/72 DH.100 Vampire Mk.I RAF, RAAF and Armée de l

Plastikový model letadla 1/72 DH.100 Vampire Mk.I RAF, RAAF and Armée de l. The kit’s plastic parts come on three grey styrene sprues and two clear sprues which are accompanied by a fret of photo-etches. The first clear sprue offers the standard, late type of the clear hood and also the original, early style canopy typical for the first Mk.Is. This part, however, was not manufactured to our standards, which we regret of course, and thus we have decided to rework the design completely and produce a second sprue with much more exact rendition of the early hood. The decal sheet contains markings for three RAF machines which differ by having various national markings on them, another machine with serial A78-1which was flown by the RAAF down under and the final option brings a very special French machine, in fact a remotely controlled drone named Porthos Originally, the Vampire Mk.I kit was to offer schemes for just two operators of the type, the RAF and RAAF. It has been decided, however, that a new marking option will be offered in this boxing to make it more attractive for a wider range of modellers. The new addition to the kit is a quite eye-catching machine wearing French colours and the title of this boxing has also been updated.

1/32 US ammunition boxes with belts of charges

1/32 US ammunition boxes with belts of charges. The set contains resin parts and decal sheet for ten cartridges in 12.7 mm strips

1/32 US ammunition boxes with cartons of charges

1/32 US ammunition boxes with cartons of charges. The set contains resin parts and decal sheet for ten cartridges in 12.7 mm strips

1/32 US ammunition boxes with cartons of charges

1/32 US ammunition boxes with cartons of charges. The set contains resin parts and decal sheet for ten cartridges in 12.7 mm strips

1/32 US ammunition boxes with belts of charges

1/32 US ammunition boxes with belts of charges. The set contains resin parts and decal sheet for ten cartridges in 12.7 mm strips

1/32 ITALIAN NIEUPORT XVII GIULIO POLI

1/32 ITALIAN NIEUPORT XVII GIULIO POLI. Decal set for Giulio Poli`s Nieiport XVII plane Printed by Cartograf Please note - Italian roundels are not included

1/32 ITALIAN NIEUPORT XVII GIOVANNI SIBELLI

1/32 ITALIAN NIEUPORT XVII GIOVANNI SIBELLI. Decal set for Giovanni Sibelli`s Nieiport XVII plane Printed by Cartograf Please note - Italian roundels are not included

1/32 ITALIAN NIEUPORT XVII GIULIO POLI

1/32 ITALIAN NIEUPORT XVII GIULIO POLI. Decal set for Giulio Poli`s Nieiport XVII plane Printed by Cartograf Please note - Italian roundels are not included

1/32 ITALIAN NIEUPORT XVII GIOVANNI SIBELLI

1/32 ITALIAN NIEUPORT XVII GIOVANNI SIBELLI. Decal set for Giovanni Sibelli`s Nieiport XVII plane Printed by Cartograf Please note - Italian roundels are not included

1/32 ITALIAN NIEUPORT XVII SERG. E. LUIT

1/32 ITALIAN NIEUPORT XVII SERG. E. LUIT. Decal set for Serg.E. Luit`s Nieiport XVII plane Printed by Cartograf Please note - Italian roundels are not included

1/32 ITALIAN NIEUPORT XVII SERG. E. LUIT

1/32 ITALIAN NIEUPORT XVII SERG. E. LUIT. Decal set for Serg.E. Luit`s Nieiport XVII plane Printed by Cartograf Please note - Italian roundels are not included

1/35 Bergepanzer Tiger I

1/35 Bergepanzer Tiger I. This is　an injection-plastic military vehicle model kit. Rye Field Model presents a 1/35 scale kit of the U.S. main battle tank: M1A2 SEP Abrams TUSK! This two-in-one kit can be built with either the TUSK I or TUSK II specifications, and features a full interior for plenty of detail to enjoy inside and out. It features a link and length type crawler belt, and comes with 830 parts, 85 photo-etched parts, and decals for multiple marking options. Grab it today! [Mold Color]: Tan [Includes]: Photo-etched parts, decals

1/35 Bergepanzer Tiger I

1/35 Bergepanzer Tiger I. This is　an injection-plastic military vehicle model kit. Rye Field Model presents a 1/35 scale kit of the U.S. main battle tank: M1A2 SEP Abrams TUSK! This two-in-one kit can be built with either the TUSK I or TUSK II specifications, and features a full interior for plenty of detail to enjoy inside and out. It features a link and length type crawler belt, and comes with 830 parts, 85 photo-etched parts, and decals for multiple marking options. Grab it today! [Mold Color]: Tan [Includes]: Photo-etched parts, decals

1/72 Chieftain Mk.10 + Mk.11 Combo

1/72 Chieftain Mk.10 + Mk.11 Combo. This is an injection-plastic military vehicle model kit.The Chieftain is a second-generation main battle tank developed in the United Kingdom after World War II. Development began in the 1950s with the goal of integrating the main tank, the Centurion, and is supporting heavy tank, the Conqueror. Mass production began in May 1963. Because the British Army was skeptical of the idea of improving mobility at the expense of armor defense, the Chieftain adopted heavy armor for occupant protection and the new L11 120mm tank gun as its main armament. The main gun was powerful enough to destroy Soviet-made tanks such as the T-55 and T-62 at a distance of up to 4,000 meters.This new kit from Takom features photo-etched parts and decals for 6 versions; link-and-length tracks and assembly jig are also included. Order yours today![Includes]: Photo-etched parts, decals for 6 versions

1/72 Chieftain Mk.10 + Mk.11 Combo

1/72 Chieftain Mk.10 + Mk.11 Combo. This is an injection-plastic military vehicle model kit.The Chieftain is a second-generation main battle tank developed in the United Kingdom after World War II. Development began in the 1950s with the goal of integrating the main tank, the Centurion, and is supporting heavy tank, the Conqueror. Mass production began in May 1963. Because the British Army was skeptical of the idea of improving mobility at the expense of armor defense, the Chieftain adopted heavy armor for occupant protection and the new L11 120mm tank gun as its main armament. The main gun was powerful enough to destroy Soviet-made tanks such as the T-55 and T-62 at a distance of up to 4,000 meters.This new kit from Takom features photo-etched parts and decals for 6 versions; link-and-length tracks and assembly jig are also included. Order yours today![Includes]: Photo-etched parts, decals for 6 versions

1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings

1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale   - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company   INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using  very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines.  After glued and shaped, paint with matt varnish.

1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings

1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale   - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company   INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using  very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines.  After glued and shaped, paint with matt varnish.

1/32 ITALIAN NIEUPORT XVII FULCO RUFFO DI CALABRIA

1/32 ITALIAN NIEUPORT XVII FULCO RUFFO DI CALABRIA. Decal set for Fulco Ruffo`s Nieiport XVII plane Printed by Cartograf Please note - Italian roundels are not included

1/48 Britten-Norman BN-2 Islander (Falkland Islands)

1/48 Britten-Norman BN-2 Islander (Falkland Islands). The model contains three sprues with parts, clear parts, photo-etched parts, decal sheet for two markings.

1/48 Britten-Norman BN-2 Islander (Falkland Islands)

1/48 Britten-Norman BN-2 Islander (Falkland Islands). The model contains three sprues with parts, clear parts, photo-etched parts, decal sheet for two markings.

1/32 ITALIAN NIEUPORT XVII FULCO RUFFO DI CALABRIA

1/32 ITALIAN NIEUPORT XVII FULCO RUFFO DI CALABRIA. Decal set for Fulco Ruffo`s Nieiport XVII plane Printed by Cartograf Please note - Italian roundels are not included

1/48 Britten-Norman BN-2A Islander (Philippine Coast Guard, NAVY)

1/48 Britten-Norman BN-2A Islander (Philippine Coast Guard, NAVY). The model contains three sprues with parts, clear parts, photo-etched parts, decal sheet for two markings.

1/48 Britten-Norman BN-2A Islander (Philippine Coast Guard, NAVY)

1/48 Britten-Norman BN-2A Islander (Philippine Coast Guard, NAVY). The model contains three sprues with parts, clear parts, photo-etched parts, decal sheet for two markings.

Lead Wire - Round Ø 0,2 mm x 120 mm (30 pcs)

Lead Wire - Round Ø 0,2 mm x 120 mm (30 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,2 mm x120 mm (30 pcs)

Lead Wire - Round Ø 0,7 mm x 120 mm (16 pcs)

Lead Wire - Round Ø 0,7 mm x 120 mm (16 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,7 mm x120 mm (16 pcs)

Lead Wire - Round Ø 0,4 mm x 120 mm (28 pcs)

Lead Wire - Round Ø 0,4 mm x 120 mm (28 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,4 mm x120 mm (28 pcs)

Lead Wire - Round Ø 0,3 mm x 120 mm (30 pcs)

Lead Wire - Round Ø 0,3 mm x 120 mm (30 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,3 mm x120 mm (30 pcs)

Lead Wire - Round Ø 0,6 mm x 120 mm (20 pcs)

Lead Wire - Round Ø 0,6 mm x 120 mm (20 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,6 mm x120 mm (20 pcs)

Lead Wire - Round Ø 0,7 mm x 120 mm (16 pcs)

Lead Wire - Round Ø 0,7 mm x 120 mm (16 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,7 mm x120 mm (16 pcs)

Lead Wire - Round Ø 0,2 mm x 120 mm (30 pcs)

Lead Wire - Round Ø 0,2 mm x 120 mm (30 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,2 mm x120 mm (30 pcs)

Lead Wire - Round Ø 0,9 mm x 120 mm (14 pcs)

Lead Wire - Round Ø 0,9 mm x 120 mm (14 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,9 mm x120 mm (14 pcs)

Lead Wire - Round Ø 0,8 mm x 120 mm (16 pcs)

Lead Wire - Round Ø 0,8 mm x 120 mm (16 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,8 mm x120 mm (16 pcs)

Lead Wire - Round Ø 0,9 mm x 120 mm (14 pcs)

Lead Wire - Round Ø 0,9 mm x 120 mm (14 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,9 mm x120 mm (14 pcs)

Lead Wire - Round Ø 0,6 mm x 120 mm (20 pcs)

Lead Wire - Round Ø 0,6 mm x 120 mm (20 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,6 mm x120 mm (20 pcs)

Lead Wire - Round Ø 0,4 mm x 120 mm (28 pcs)

Lead Wire - Round Ø 0,4 mm x 120 mm (28 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,4 mm x120 mm (28 pcs)

Lead Wire - Round Ø 0,8 mm x 120 mm (16 pcs)

Lead Wire - Round Ø 0,8 mm x 120 mm (16 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,8 mm x120 mm (16 pcs)

Lead Wire - Round Ø 0,3 mm x 120 mm (30 pcs)

Lead Wire - Round Ø 0,3 mm x 120 mm (30 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,3 mm x120 mm (30 pcs)

Lead Wire - Round Ø 0,5 mm x 120 mm (24 pcs)

Lead Wire - Round Ø 0,5 mm x 120 mm (24 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,5 mm x120 mm (24 pcs)

1/48 Britten-Norman BN-2B Islander ( Danish Air Force Home Guard)

1/48 Britten-Norman BN-2B Islander ( Danish Air Force Home Guard). The model contains three sprues with parts, clear parts, photo-etched parts, decal sheet for two markings.

1/48 Britten-Norman BN-2B Islander ( Danish Air Force Home Guard)

1/48 Britten-Norman BN-2B Islander ( Danish Air Force Home Guard). The model contains three sprues with parts, clear parts, photo-etched parts, decal sheet for two markings.

Lead Wire - Round Ø 0,5 mm x 120 mm (24 pcs)

Lead Wire - Round Ø 0,5 mm x 120 mm (24 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,5 mm x120 mm (24 pcs)

Plastikový model letadla 1/72 Boston MK.III Intruder

Plastikový model letadla 1/72 Boston MK.III Intruder. Model of the US WW2 two-engined aircraft in a version used by the British in the night fighter and intruder roles. The kit consists of seven styrene sprues which feature also the underbelly machine gun pod for the Intruder machines and the Havoc Mk.II night fighter style nose section, one clear styrene sprue, decal sheet, resin parts and photo etches. this version has never been kitted before decals cater for four marking schemes, two Intruders and two Havoc Mk.III‘s photo etched antenna array parts finely detailed Hedgehog style exhausts Country of origin: UK / WWII

1/35 M1a2 Sep Abrams Tusk I /Tusk Ii With Full Interior

1/35 M1a2 Sep Abrams Tusk I /Tusk Ii With Full Interior. This is　an injection-plastic military vehicle model kit. Rye Field Model presents a 1/35 scale kit of the U.S. main battle tank: M1A2 SEP Abrams TUSK! This two-in-one kit can be built with either the TUSK I or TUSK II specifications, and features a full interior for plenty of detail to enjoy inside and out. It features a link and length type crawler belt, and comes with 830 parts, 85 photo-etched parts, and decals for multiple marking options. Grab it today! [Mold Color]: Tan [Includes]: Photo-etched parts, decals

1/35 M1a2 Sep Abrams Tusk I /Tusk Ii With Full Interior

1/35 M1a2 Sep Abrams Tusk I /Tusk Ii With Full Interior. This is　an injection-plastic military vehicle model kit. Rye Field Model presents a 1/35 scale kit of the U.S. main battle tank: M1A2 SEP Abrams TUSK! This two-in-one kit can be built with either the TUSK I or TUSK II specifications, and features a full interior for plenty of detail to enjoy inside and out. It features a link and length type crawler belt, and comes with 830 parts, 85 photo-etched parts, and decals for multiple marking options. Grab it today! [Mold Color]: Tan [Includes]: Photo-etched parts, decals

Plastikový model letadla 1/72 Boston MK.III Intruder

Plastikový model letadla 1/72 Boston MK.III Intruder. Model of the US WW2 two-engined aircraft in a version used by the British in the night fighter and intruder roles. The kit consists of seven styrene sprues which feature also the underbelly machine gun pod for the Intruder machines and the Havoc Mk.II night fighter style nose section, one clear styrene sprue, decal sheet, resin parts and photo etches. this version has never been kitted before decals cater for four marking schemes, two Intruders and two Havoc Mk.III‘s photo etched antenna array parts finely detailed Hedgehog style exhausts Country of origin: UK / WWII

Lead Wire - Round Ø 0,7 mm x 250 mm (16 pcs)

Lead Wire - Round Ø 0,7 mm x 250 mm (16 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,7 mm x 250 mm (16 pcs)

Lead Wire - Round Ø 0,6 mm x 250 mm (20 pcs)

Lead Wire - Round Ø 0,6 mm x 250 mm (20 pcs). For easy design of hoses and manifolds on kits Lead Wire - Round Ø 0,6 mm x 250 mm (20 pcs)