Hračky
Celkem 5339 produktů
1/72 GERMAN 80T TYPE SSYMS SCHWERER PLATFORMWAGEN. This is an injection-plastic military vehicle model kit. The Type SSyms 80-ton armored railway flatbed car was used by the Germans to transport their heavy tanks during WWII. This kit includes two frets of photo-etched parts and decals for 2 markings versions. [Includes]: Photo-etched parts, decals for 2 versions
1/72 GERMAN 80T TYPE SSYMS SCHWERER PLATFORMWAGEN. This is an injection-plastic military vehicle model kit. The Type SSyms 80-ton armored railway flatbed car was used by the Germans to transport their heavy tanks during WWII. This kit includes two frets of photo-etched parts and decals for 2 markings versions. [Includes]: Photo-etched parts, decals for 2 versions
1/48 Messerschmitt Bf 109G-6 - Microplastic Seat Belts - pre-cut (laser). Seat belts, suitable for plastic scale aircrafts, are made from micro-plastic foil. In combination with attached photo etched buckles this accesorry looks highly realistic. These are available in 1/48 scale and for more comfortable work they are pre-cut. contains highly detailed micro-plastic and photo-etched partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-plastic material which credibly simulates textilebelts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparationsphoto-etched parts are developed in cooperation with Hauler company
1/35 Sturmtiger Rm61 L/5.4/38cm W/Workable Track Links. This is an injection-plastic military vehicle model kit. The Sturmtiger was a self-propelled artillery developed by Germany in World War II. This tank remodeled the chassis of the Tiger I, and it was equipped with a 38cm rocket mortar originally developed for the German Navy. Only 18 of this tank were produced. Interior parts are limited to parts inside the battle room; parts such as the engine, radiator fan, and transmission are not included. The track links are movable, and photo-etched parts are included, as are decals for 3 markings versions. [Includes]: Photo-etched parts, decals for 3 versions
1/48 Messerschmitt Bf 109G-6 - Microplastic Seat Belts - pre-cut (laser). Seat belts, suitable for plastic scale aircrafts, are made from micro-plastic foil. In combination with attached photo etched buckles this accesorry looks highly realistic. These are available in 1/48 scale and for more comfortable work they are pre-cut. contains highly detailed micro-plastic and photo-etched partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-plastic material which credibly simulates textilebelts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparationsphoto-etched parts are developed in cooperation with Hauler company
Bavlněná rouška s kapsou bílá / Cotton Face Mask with Filter pocket-White. Important: The mask should be washed at 90 ° C before first use. This will improve the protective properties and hygiene of the cotton. The mask is made of 100% cotton and is made of 2 layers of cotton with a filter pocket. We offer a maximum of 8 pieces per order for colleagues who do not have the opportunity or time to make masks themselves. The masks are sewn by a small clothing company from Liberec, which can continue to provide work for its employees, women and wives of friends and colleagues. We offer masks to support small business and they are not for our enrichment.
1/35 Sturmtiger Rm61 L/5.4/38cm W/Workable Track Links. This is an injection-plastic military vehicle model kit. The Sturmtiger was a self-propelled artillery developed by Germany in World War II. This tank remodeled the chassis of the Tiger I, and it was equipped with a 38cm rocket mortar originally developed for the German Navy. Only 18 of this tank were produced. Interior parts are limited to parts inside the battle room; parts such as the engine, radiator fan, and transmission are not included. The track links are movable, and photo-etched parts are included, as are decals for 3 markings versions. [Includes]: Photo-etched parts, decals for 3 versions
1/35 Panzer IV Ausf.J last production - full interior. The No, IV Type J tank was the final version of the No. IV tank series, and was simplified from previous versions to improve productivity. The biggest change from the H-type is the removal of the turret rotation motor and auxiliary engine for power generation; this allowed the turret to be turned manually. By removing these items and adding a fuel tank, the tank's cruising range was increased from 210km to 320km on level ground. This kit from Rye Field Model has a newly molded full interior! It also has clear parts for the turret and upper hull, in addition to the normal parts. The tracks are of the linkable assembly type, and the suspension is movable; it comes with three types of muzzle brakes, two types of guide wheels and four types of upper wheels. Photo-etched parts and decals for three versions are also included. [Includes]: Photo-etched parts, decals for 3 versions
1/32 Focke Wulf Fw 190A-8 - Fabric Seat Belts - pre-cut (laser). The set contains complete belts for two aircrafts. Accessory designed for your plastic model Fw190A-8. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. ACCESSORY FEATURES contains micro-fabric and photo-etched highly detailed partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-fabric material which behaves like a piece of ragtextile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations INSTRUCTIONS Take the precut textile part out of the sheet.Remove the carrier paper.Bunch the belts up and knead them between the fingers.Thread the belts through the photo etched buckles – use superglue.Put them into the seat.Spray with glossy varnish.Spray with matt varnish.Impregnate the seat belts with very diluted oil colour (mix of black and brown) > texture highlight.
1/32 Focke Wulf Fw 190A-8 - Fabric Seat Belts - pre-cut (laser). The set contains complete belts for two aircrafts. Accessory designed for your plastic model Fw190A-8. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. ACCESSORY FEATURES contains micro-fabric and photo-etched highly detailed partsbelts are fully functional - modeler can leave them un/fastenedmade from printed micro-fabric material which behaves like a piece of ragtextile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations INSTRUCTIONS Take the precut textile part out of the sheet.Remove the carrier paper.Bunch the belts up and knead them between the fingers.Thread the belts through the photo etched buckles – use superglue.Put them into the seat.Spray with glossy varnish.Spray with matt varnish.Impregnate the seat belts with very diluted oil colour (mix of black and brown) > texture highlight.
1/35 Panzer IV Ausf.J last production - full interior. The No, IV Type J tank was the final version of the No. IV tank series, and was simplified from previous versions to improve productivity. The biggest change from the H-type is the removal of the turret rotation motor and auxiliary engine for power generation; this allowed the turret to be turned manually. By removing these items and adding a fuel tank, the tank's cruising range was increased from 210km to 320km on level ground. This kit from Rye Field Model has a newly molded full interior! It also has clear parts for the turret and upper hull, in addition to the normal parts. The tracks are of the linkable assembly type, and the suspension is movable; it comes with three types of muzzle brakes, two types of guide wheels and four types of upper wheels. Photo-etched parts and decals for three versions are also included. [Includes]: Photo-etched parts, decals for 3 versions
1/72 GERMAN 50T TYPE SSYS SCHWERER PLATFORMWAGEN. This is an injection-plastic military vehicle model kit. The Type SSys 50-ton armored railway flatbed car was used by the Germans to transport their heavy tanks during WWII. This kit includes two frets of photo-etched parts and decals for 2 markings versions. [Includes]: Photo-etched parts, decals for 2 versions
1/72 GERMAN 50T TYPE SSYS SCHWERER PLATFORMWAGEN. This is an injection-plastic military vehicle model kit. The Type SSys 50-ton armored railway flatbed car was used by the Germans to transport their heavy tanks during WWII. This kit includes two frets of photo-etched parts and decals for 2 markings versions. [Includes]: Photo-etched parts, decals for 2 versions
Plastikový model letadla 1/72 Fouga CM.170 Magister ‘French, Belgian and Irish Service’. The Fouga Magister was a French jet trainer aircraft which was used by a large number of oprators, not only in Europe. This boxing brings decal schemes for French, Belgian and Irish options.four grey styrene sprues and one clear canopy sprue. four marking options, two as flown in France (one of which sports an anniversary scheme), one operated in Belgium and one in the Republic of Ireland nicely detailed model resin detail sets also available for any Fouga boxing: Seats Q72227, Wheels Q72228, Pilots and a Mechanic F72306 for Israeli boxing, we have also designed armament sets: Unguided Rockets Q72348, Bombs Q72349 and Rocket launchers Q72306.
1/35 Panzer IV Ausf. H early. Rye Field Model brings us the definitive model kit of the IV Tank H Type! This was the final development of the IV tank. Production began in April 1943, and by July 1944, 3,774 vehicles were produced -- the highest number in the IV series.The crawler tracks are assembled and movable; the Maybach HL120TRM engine is precisely reproduced around the breech. The suspension is movable too, and the starter wheels, guide wheels, and rolling wheels can all rotate after assembly thanks to polycaps. Photo-etched parts are included for Schulzen and additional anti-aircraft armor, as are decals for three versions. [Includes]: Photo-etched parts, decals for 3 versions
Plastikový model letadla 1/72 Fouga CM.170 Magister ‘French, Belgian and Irish Service’. The Fouga Magister was a French jet trainer aircraft which was used by a large number of oprators, not only in Europe. This boxing brings decal schemes for French, Belgian and Irish options.four grey styrene sprues and one clear canopy sprue. four marking options, two as flown in France (one of which sports an anniversary scheme), one operated in Belgium and one in the Republic of Ireland nicely detailed model resin detail sets also available for any Fouga boxing: Seats Q72227, Wheels Q72228, Pilots and a Mechanic F72306 for Israeli boxing, we have also designed armament sets: Unguided Rockets Q72348, Bombs Q72349 and Rocket launchers Q72306.
1/35 Panzer IV Ausf. H early. Rye Field Model brings us the definitive model kit of the IV Tank H Type! This was the final development of the IV tank. Production began in April 1943, and by July 1944, 3,774 vehicles were produced -- the highest number in the IV series.The crawler tracks are assembled and movable; the Maybach HL120TRM engine is precisely reproduced around the breech. The suspension is movable too, and the starter wheels, guide wheels, and rolling wheels can all rotate after assembly thanks to polycaps. Photo-etched parts are included for Schulzen and additional anti-aircraft armor, as are decals for three versions. [Includes]: Photo-etched parts, decals for 3 versions
1/32 Nieuport XXIII Belgium, Russia. Was largely the same as the definitive XVII, differing mainly in the use of a different machine gun synchronizer. Nieuport XXIIIs were operated by both French and British squadrons alongside Nieuport XVIIs until their replacement by Nieuport 24s. CSM 1/32 plastic injection kit -5 plastic frets -Instruction in colour -Film for windscreen -PhotoEtch -Decals for 4 markings printed by Cartograf
1/32 Nieuport XXIII Belgium, Russia. Was largely the same as the definitive XVII, differing mainly in the use of a different machine gun synchronizer. Nieuport XXIIIs were operated by both French and British squadrons alongside Nieuport XVIIs until their replacement by Nieuport 24s. CSM 1/32 plastic injection kit -5 plastic frets -Instruction in colour -Film for windscreen -PhotoEtch -Decals for 4 markings printed by Cartograf
Tamiya Basic File Set (Smooth Double-Cut) - Sada oboustraných pilníků. This set of 3 files includes flat, hemispherical and round files for use in the construction of plastic models, Mini 4WD models, and even for metal-working. The files are double-cut and their smooth cut provides an equally-smooth finish on the material being worked. A special coating is applied to the grip to make it extremely comfortable to hold.
Plastikový model letadla 1/72 SB2A-4 Buccaneer ‘US Marines Bomber’ . The SB2A dive bomber aircraft was designed by Brewster during WW2 to be operated primarily from aircraft carriers. Although the type was produced in several various versions, it was used only for training. The British military used the type under their own name of Bermuda. A similar version was also developed for the air force of Dutch East Indies (ML-KNIL), but in the end was not delivered as the Dutch surrendered. The SB2A-3 saw service with the US Navy whilst the dash 4 variety, as brought to you in our recent release, belonged to the US Marines inventory. The decal sheet offers markings for three US Marines airframes bearing both the two- and three-colour schemes and one fictious machine as it might have looked like had it been acquired by the Dutch. US naval dive bomber the SB2A-4 was operated by the Marines decals for three US Marines options and one as would have been flown by Dutch East Indies (they in fact wanted to buy the type) the kit contains resin parts and etches
Plastikový model letadla 1/72 SB2A-4 Buccaneer ‘US Marines Bomber’ . The SB2A dive bomber aircraft was designed by Brewster during WW2 to be operated primarily from aircraft carriers. Although the type was produced in several various versions, it was used only for training. The British military used the type under their own name of Bermuda. A similar version was also developed for the air force of Dutch East Indies (ML-KNIL), but in the end was not delivered as the Dutch surrendered. The SB2A-3 saw service with the US Navy whilst the dash 4 variety, as brought to you in our recent release, belonged to the US Marines inventory. The decal sheet offers markings for three US Marines airframes bearing both the two- and three-colour schemes and one fictious machine as it might have looked like had it been acquired by the Dutch. US naval dive bomber the SB2A-4 was operated by the Marines decals for three US Marines options and one as would have been flown by Dutch East Indies (they in fact wanted to buy the type) the kit contains resin parts and etches
1/32 Nieuport XXI Russian Service. A french fighter, While it had a similar airframe to the Nieuport XVII, it was equipped with a less powerful Le Rhone 9C engine as it was originally intended as a long range escort fighter. It was also license manufactured in Russia by Dux Factory. CSM 1/32 plastic injection kit -6 plastic frets -Instruction in colour -Film for windscreen -PhotoEtch -Decals for 4 markings printed by Cartograf
1/32 Nieuport XXI Russian Service. A french fighter, While it had a similar airframe to the Nieuport XVII, it was equipped with a less powerful Le Rhone 9C engine as it was originally intended as a long range escort fighter. It was also license manufactured in Russia by Dux Factory. CSM 1/32 plastic injection kit -6 plastic frets -Instruction in colour -Film for windscreen -PhotoEtch -Decals for 4 markings printed by Cartograf
1/72 SK-37 Viggen Cockpit Set. For the new 1/72 Viggen kit, respectively for the SK-37 two seater version produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, with the new resin parts directly replacing the original styrene ones, no surgery is needed at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/35 Pz.Kpfw.Iv Ausf.J Late W/Workable Track Links. This is an injection-plastic military vehicle model kit. This kit features 2 types of drive sprockets, 5 types of return rollers, and 3 types of retractors in addition to the workable links. A metal barrel, photo-etched parts and decals for 6 versions are also included, as are many accessories! Order yours today! [Includes]: Photo-etched parts, decals for 6 versions, metal gun barrel
1/35 Pz.Kpfw.Iv Ausf.J Late W/Workable Track Links. This is an injection-plastic military vehicle model kit. This kit features 2 types of drive sprockets, 5 types of return rollers, and 3 types of retractors in addition to the workable links. A metal barrel, photo-etched parts and decals for 6 versions are also included, as are many accessories! Order yours today! [Includes]: Photo-etched parts, decals for 6 versions, metal gun barrel
1/72 SK-37 Viggen Cockpit Set. For the new 1/72 Viggen kit, respectively for the SK-37 two seater version produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, with the new resin parts directly replacing the original styrene ones, no surgery is needed at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
Plastikový model letadla 1/72 SH 89 / CASA C.212 'ASW & Maritime Patrol' . The CASA C.212 is a Spanish turboprop-powered STOL cargo aircraft that has seen service with a wide range of countries and flew in many different roles, one of them being maritime surveillance and patrol. Machines fitted for this sort of tasks carry radar antennae in distinctive, duck beak like shaped radomes at the front of the fuselage as well as some more electronics equipment within the airframe. Highly accurate and nicely detailed model Precisely designed sheet of decals offering markings for two Swedish airframes in different colour schemes, one Malta-based machine and a Spanish one. Specific antenna arrays made of resin and photo-etches Double-slotted wing flaps – resin set no.7407 – is recommended for discerning modeller
Plastikový model letadla 1/72 SH 89 / CASA C.212 'ASW & Maritime Patrol' . The CASA C.212 is a Spanish turboprop-powered STOL cargo aircraft that has seen service with a wide range of countries and flew in many different roles, one of them being maritime surveillance and patrol. Machines fitted for this sort of tasks carry radar antennae in distinctive, duck beak like shaped radomes at the front of the fuselage as well as some more electronics equipment within the airframe. Highly accurate and nicely detailed model Precisely designed sheet of decals offering markings for two Swedish airframes in different colour schemes, one Malta-based machine and a Spanish one. Specific antenna arrays made of resin and photo-etches Double-slotted wing flaps – resin set no.7407 – is recommended for discerning modeller
