Hračky
Celkem 1632 produktů
1/48 SE.5a Night Fighter. ProfiPack edition of 1/48 scale kit of British WWII fighter aircraft SE.5a.The kits offers the aircraft modified to the night fighter role.plastic parts: EduardNo. of decal options: 4decals: EduardPE parts: yes, pre-paintedpainting mask: yesresin parts: yes, exhaust flame dampers
1/72 Blackburn Firebrand TF.Mk.IV. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. The Firebrand TF Mk.IV featured a 2,520bhp Centaurus IX or Centaurus 57 engine. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.IV. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. The Firebrand TF Mk.IV featured a 2,520bhp Centaurus IX or Centaurus 57 engine. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.5. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
1/72 Blackburn Firebrand TF.Mk.5. This is an injection-plastic aircraft model kit. The Firebrand is a single-seat aircraft developed by Blackburn Aircraft during World War II, used by the Royal Navy Air Corps. Originally developed as a fighter, it was redesigned as a strike fighter, which took six years, and the first aircraft were not delivered until after the end of the war. This kit is a completely new mold, and includes resin parts for the cockpit, wheels, etc., as well as photo-etched parts and two types of Royal Navy decals. Will be approximately 16.5cm long with a wingspan of 21.7cm when completed. [Includes]: Resin parts, photo-etched parts, decals for 2 versions
Plastikový model letadla 1/72 Potez 25 TOE - 'For France - any time, any where'. The Potez 25 biplanes enjoyed long and faithful service with the French military, it lasted from the 1920s until the end of WW2. The TOE version of the biplane was primarily destined to fly in the France’s overseas colonies. The kit offers four interesting and colourful scheme options, a Vichy machine boasting distinctive red-yellow stripes which saw service in French Indochina in 1942, a pre-war airframe with white stripes on its top wing, an Aeronavale machine which was operated over mainland France in 1940 and finally a Free French Potez as used in Syria in 1944. highly accurate and nicely detailed model four machines illustrating the type’s long service for France meticulously designed decal sheet photo-etched parts are included too Operators: France/pre WWII-WWII
Plastikový model letadla 1/72 Potez 25 TOE - 'For France - any time, any where'. The Potez 25 biplanes enjoyed long and faithful service with the French military, it lasted from the 1920s until the end of WW2. The TOE version of the biplane was primarily destined to fly in the France’s overseas colonies. The kit offers four interesting and colourful scheme options, a Vichy machine boasting distinctive red-yellow stripes which saw service in French Indochina in 1942, a pre-war airframe with white stripes on its top wing, an Aeronavale machine which was operated over mainland France in 1940 and finally a Free French Potez as used in Syria in 1944. highly accurate and nicely detailed model four machines illustrating the type’s long service for France meticulously designed decal sheet photo-etched parts are included too Operators: France/pre WWII-WWII
1/32 Fokker E.I - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.I by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. HGW Models Super Detail Set in 1:32 scale - this set is designed for Wingnut Wings kits photo-etched parts were developed in cooperation with Eduard company contains (check accessories for more info): - 132536 Fokker E.I seatbelts - LASER - 132114 Fokker E.I PE set - 132118 Oberursel U.0 PE set - 632022 Fokker E.I MASK - HGW Decal - Light Wood (tester)
1/32 Fokker E.I - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.I by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. HGW Models Super Detail Set in 1:32 scale - this set is designed for Wingnut Wings kits photo-etched parts were developed in cooperation with Eduard company contains (check accessories for more info): - 132536 Fokker E.I seatbelts - LASER - 132114 Fokker E.I PE set - 132118 Oberursel U.0 PE set - 632022 Fokker E.I MASK - HGW Decal - Light Wood (tester)
1/35 Panzerkampfwagen 38(t) Ausf.E/F. This is an injection-plastic military vehicle model kit. From Tamiya: After the effective annexation of Czechoslovakia by Nazi Germany in 1939, German forces were interested enough in the native Czech LTvz38 light tank that they took it on and ordered production under their own categorization of 38(t), a light tank with riveted, welded armor and a perky 3.7cm gun. Early production 38(t)s took part in the early German offensives of the war, and the 38(t) underwent continued development with 1,400 produced in total. Ausf.E and F 38(t)s had additional armor across the vehicle for better survivability and were deployed during the early stages of Operation Barbarossa as Nazi Germany once again invaded a neighbor, this time the Soviet Union. About the Model Length: 132mm, width: 62mm The 38(t) form with riveted armor plate is accurately depicted. Parts are included to recreate fender-top stowage boxes that were often added by units on the front line. Assembly type tracks feature single-piece straight sections for fine reproduction of upper run 'sag.' Engine grille mesh is rendered faithfully using a photo-etched component. Comes with a commander figure for installation in the hatch, and two Eastern Front marking options.
1/35 Panzerkampfwagen 38(t) Ausf.E/F. This is an injection-plastic military vehicle model kit. From Tamiya: After the effective annexation of Czechoslovakia by Nazi Germany in 1939, German forces were interested enough in the native Czech LTvz38 light tank that they took it on and ordered production under their own categorization of 38(t), a light tank with riveted, welded armor and a perky 3.7cm gun. Early production 38(t)s took part in the early German offensives of the war, and the 38(t) underwent continued development with 1,400 produced in total. Ausf.E and F 38(t)s had additional armor across the vehicle for better survivability and were deployed during the early stages of Operation Barbarossa as Nazi Germany once again invaded a neighbor, this time the Soviet Union. About the Model Length: 132mm, width: 62mm The 38(t) form with riveted armor plate is accurately depicted. Parts are included to recreate fender-top stowage boxes that were often added by units on the front line. Assembly type tracks feature single-piece straight sections for fine reproduction of upper run 'sag.' Engine grille mesh is rendered faithfully using a photo-etched component. Comes with a commander figure for installation in the hatch, and two Eastern Front marking options.
1/48 Fw 190A-2. ProfiPACK edition kit of German WWII fighter aircraft Fw 190A-2 in 1/48 scale.The kit offers the aircraft with two-cannon as well as four-cannon wings.plastic parts: EduardNo. of decal options: 5decals: EduardPE parts: yes, pre-paintedpainting mask: yesresin parts: yes, wheel well doors
1/48 Fw 190A-2. ProfiPACK edition kit of German WWII fighter aircraft Fw 190A-2 in 1/48 scale.The kit offers the aircraft with two-cannon as well as four-cannon wings.plastic parts: EduardNo. of decal options: 5decals: EduardPE parts: yes, pre-paintedpainting mask: yesresin parts: yes, wheel well doors
Duke Hawkins: Phantom II E/F/EJ, RF-4C/E/EJ & QF-4E (196 pages) EN. Probably one of the most iconic fighter jets in the world, the McDonnell Douglas F-4 Phantom II was the first aircraft designed for the US Air Force, Navy and Marine Corps. In this 196 page book, we focus on the landbased versions of the Phantom: the E, F, EJ, RF-4C, RF-4E, RF-4EJ and the colourful QF-4E target drone. In this book, every detail of the aircraft is shown, from the cockpit to the wings, fuselage or landing gear. This book is filled to the rim with high quality photos - some 500 of them ! - of aircraft from different air forces. Separate chapters give a closer look at Phantoms of Greece, Iran, South Korea, Turkey and Germany. Action galore! An extensive chapter is included on the QF-4E Target Drone that was used in the USAF. After their active career, many Phantoms were converted to targets for other fighter jets, shooting them down with life missiles. Prepare for close-ups! As is tradition with our books, the cockpit is an important chapter, showing the cockpits of the F-4F, the upgraded Icaros I and the reconnaisance version of the Phantom II. Some 30 pages are dedicated to the Phantom in service with the Japanese Air Self Defence Force. A lot of action, but also a closer look at the F-4EJ Kai upgraded version. The JASDF also operated the Phantom in the reconnaissance role; not just as an RF-4E, but also converted F-4EJs, equipped with different reconnaissance pods. Every pod is included in this book!
1/35 US Army Jeep + trailer & MP figure. Powered by a 60hp engine, the U.S. Army 1/4-ton trucks were wildly popular off-road capable light utility vehicles, built in large numbers to a standardized design from 1941 to 1945, for the Allied forces in World War II. With an operational range of 300 miles, the 1/4-ton truck became the primary light wheeled transport vehicle of the United States military and its allies in World War II, as well as the postwar period. About 650,000 units were built, constituting a quarter of the total U.S. non-combat motor vehicles produced during the war, with large numbers being provided to U.S. allies. Release Date:Aug 2019 Item Size/Weight:30.3cm x 20.0cm x 5.0cm / 250g
1/35 US Army Jeep + trailer & MP figure. Powered by a 60hp engine, the U.S. Army 1/4-ton trucks were wildly popular off-road capable light utility vehicles, built in large numbers to a standardized design from 1941 to 1945, for the Allied forces in World War II. With an operational range of 300 miles, the 1/4-ton truck became the primary light wheeled transport vehicle of the United States military and its allies in World War II, as well as the postwar period. About 650,000 units were built, constituting a quarter of the total U.S. non-combat motor vehicles produced during the war, with large numbers being provided to U.S. allies. Release Date:Aug 2019 Item Size/Weight:30.3cm x 20.0cm x 5.0cm / 250g
1/35 Einheitsanhänger 5t. The Anhänger 5T or 5 tonne trailer, known by the official nomenclature of „Einheitsanhanger 5 t Baumuster E 5“ was the standard medium military trailer of the German military throughout the second world war. With a load capacity of 5 tonnes, and an empty weight of approximately 2.5 tonnes, the Anhänger 5t could be seen hauling material anywhere the German military was active. Also utilized by the Luftwaffe and Kriegsmarine for transportation duties, the Anhanger 5t proved so rugged and useful that it continued to serve other masters well after the end of hostilities Highly detailed static plastic model Fine detailed multi disc wheels with sag Side and rear panels buildable in 2 different options (raised or lowered) Specific decalsheet included Drawbar and front axle fully movable
1/35 Einheitsanhänger 5t. The Anhänger 5T or 5 tonne trailer, known by the official nomenclature of „Einheitsanhanger 5 t Baumuster E 5“ was the standard medium military trailer of the German military throughout the second world war. With a load capacity of 5 tonnes, and an empty weight of approximately 2.5 tonnes, the Anhänger 5t could be seen hauling material anywhere the German military was active. Also utilized by the Luftwaffe and Kriegsmarine for transportation duties, the Anhanger 5t proved so rugged and useful that it continued to serve other masters well after the end of hostilities Highly detailed static plastic model Fine detailed multi disc wheels with sag Side and rear panels buildable in 2 different options (raised or lowered) Specific decalsheet included Drawbar and front axle fully movable
1/32 Fokker E.IV - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.IV by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. Fokker E.IV | Seatbelts | 132537 Fokker E.IV | Photo Etched Parts | 132115 Fokker E.IV | Engine (Oberursel U.III) PE Set | 132119 Fokker E.IV | Masks | 632023 HGW Decal | Tester Set is designed for vintage aircraft model from Wingnut Wings.
1/32 Fokker E.IV - Super Detail Set - Photo-etched Sets - Wingnut Wings. Highly detailed set suitable for Fokker E.IV by Wingnut Wings in 1/32 scale. Pack contains unique textile seatbelts made from real micro fibre; photo etched parts developed in cooperation with Eduard company and also masks for more comfortable painting. Fokker E.IV | Seatbelts | 132537 Fokker E.IV | Photo Etched Parts | 132115 Fokker E.IV | Engine (Oberursel U.III) PE Set | 132119 Fokker E.IV | Masks | 632023 HGW Decal | Tester Set is designed for vintage aircraft model from Wingnut Wings.
1/35 Pz.Sfl. Ia - 5cm Pak 38 auf gp. Mun Schlepper VK3.02. Plastová sada pro samohybný tankový kanón Ia s protiletadlovým kanónem 5 cm na obrněném muničním traktoru VK3.02 - bez figurek - segmentové řetězy - 4 možnosti značení Pro Pz.Sfl.Ia 5cm Pak 38 na GP Mun.Schlepper. Po vítězství na západě 5. července 1940 pověřil In 6 Wa Prüf vývoj stíhače lehkých tanků. To by mělo být určeno pro výsadkové jednotky a nemotorizované pěchotní divize. Společnost WaPrüf pověřila společnost Rheinmetall-Borsig vývojem 5 cm Pak 38 L / 60 na podvozku muničního traktoru od společnosti Borgward. Pro úsporu hmotnosti byl vyžadován Schottenpanzer se dvěma 4 mm silnými pancéřovými deskami vpředu a pro dělo, stejně jako se dvěma 3 cm pancéřovými deskami po stranách a vzadu. Tato tloušťka je dost na to, aby byly bezpečné 7,92 mm SMK. Podvozek byl upravený muniční traktor VK 3.02, poháněn 2,3litrovým motorem Borgward 50 HP, který umožnil 4,5tunovému vozidlu dosáhnout rychlosti 30 km / h. Posádku tvořili 3 muži (velitel / střelec, řidič a nakladač. V tankovém programu 41 ze dne 30. května 1941 je poptávka po tomto vozidle uvedena na 3144 kusů. Zahájení výroby bylo plánováno na rok 1943 s výkonem 100 kusů od 1. dubna 44 a od 200 kusů od 1. dubna 45. Dvě experimentální zařízení byla vyrobena do 1. července 42 a skenována pro testování vojsk. 8. srpna 1942 o tancích informovala 19. tanková divize, ale zpráva je ztracena. Měřítko 1:35
1/35 Pz.Sfl. Ia - 5cm Pak 38 auf gp. Mun Schlepper VK3.02. Plastová sada pro samohybný tankový kanón Ia s protiletadlovým kanónem 5 cm na obrněném muničním traktoru VK3.02 - bez figurek - segmentové řetězy - 4 možnosti značení Pro Pz.Sfl.Ia 5cm Pak 38 na GP Mun.Schlepper. Po vítězství na západě 5. července 1940 pověřil In 6 Wa Prüf vývoj stíhače lehkých tanků. To by mělo být určeno pro výsadkové jednotky a nemotorizované pěchotní divize. Společnost WaPrüf pověřila společnost Rheinmetall-Borsig vývojem 5 cm Pak 38 L / 60 na podvozku muničního traktoru od společnosti Borgward. Pro úsporu hmotnosti byl vyžadován Schottenpanzer se dvěma 4 mm silnými pancéřovými deskami vpředu a pro dělo, stejně jako se dvěma 3 cm pancéřovými deskami po stranách a vzadu. Tato tloušťka je dost na to, aby byly bezpečné 7,92 mm SMK. Podvozek byl upravený muniční traktor VK 3.02, poháněn 2,3litrovým motorem Borgward 50 HP, který umožnil 4,5tunovému vozidlu dosáhnout rychlosti 30 km / h. Posádku tvořili 3 muži (velitel / střelec, řidič a nakladač. V tankovém programu 41 ze dne 30. května 1941 je poptávka po tomto vozidle uvedena na 3144 kusů. Zahájení výroby bylo plánováno na rok 1943 s výkonem 100 kusů od 1. dubna 44 a od 200 kusů od 1. dubna 45. Dvě experimentální zařízení byla vyrobena do 1. července 42 a skenována pro testování vojsk. 8. srpna 1942 o tancích informovala 19. tanková divize, ale zpráva je ztracena. Měřítko 1:35