Dětské zboží
Celkem 1060 produktů
Wargames (AoB) figurky 8008 - Persian Chariot and Cavalry (1:72). Sada figurek doplňujících modely. Velikost figurek je 1:72. Balení obsahuje: 9 figurek. Informace o originálu: Detaily modelu: Měřítko: 1:72 počet figurek: 9 Doporučeno pro děti od 8 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Wargames (AoB) figurky 8061 - Austrian Musketers and Pikeman (1:72). Sada figurek doplňujících modely. Velikost figurek je 1:72; 2,5 cm. Balení obsahuje: 45 dílků. Informace o originálu: Detaily modelu: Měřítko: 1:72 Velikost figurek: 25 mm Počet dílků: 45 Doporučeno pro děti od 8 let. Upozornění: Nebezpečí udušení! Výrobek obsahuje malé části. NEVHODNÉ PRO DĚTI DO 3 LET!
Chystáte se s dítětem na karneval, na dětskou párty, na masopust nebo na Halloween? Karnevalový kostým Strašidelný klaun pro holky od 5 do 9 let s výškou 120 až 130 cm obsahuje klaunské šaty hnědo-zelené barvy a béžový límec. Během líčení či při tvorbě případných doplňku zažijete s dítětem spoustu zábavy. Díky tomuto kostýmu se tak stane vaše ratolest hvězdou každého karnevalu. Hlavní přednosti Dětský kostým ideální na Halloween Kompletní set – klaunské šaty hnědo-zelené barvy a béžový límec Doplňky si můžete vybrat/vyrobit podle vaší fantazie či oblíbeného horroru Specifikace Značka: MaDe Určení: karnevalový kostým Motiv: strašidelný klaun Doporučený věk: 5 až 9 let Vhodná výška: 120 až 130 cm Barva kostýmu: hnědo-zelená a béžová Kostým: klaunské šaty a límec Fyzické vlastnosti Čistá hmotnost: 250 g Hmotnost balení: 330 g Rozměry balení (Š x V x H): 40 x 4 x 30 cm Obsah balení 1x karnevalový kostým Strašidelný klaun
Tento karnevalový kostým promění vašeho chlapečka na lovce nebo Robina Hooda. Klučičí oblek obsahuje klobouk, košili, opasek, kalhoty a krytí bot. Skvěle se hodí na dětské párty, oslavy, karnevaly, maškarní plesy, Halloween nebo na dětské fotografování. Kostým neobsahuje boty, takže si můžete tyto doplňky zvolit podle vlastní fantazie. Kostým lovčího je vhodný pro děti ve věku od 3 do 4 let s výškou 92 až 104 cm. Hlavní přednosti Roztomilý kostým Kompletní set – klobouk, košile, opasek, kalhoty a krytí bot Boty si můžete vybrat podle vaší fantazie Specifikace Značka: MaDe Určení: karnevalový kostým Motiv: Lovčí Doporučený věk: 3 až 4 let Vhodná výška: 92 až 104 cm Barva kostýmu: zelená / hnědá Kostým: klobouk + košile + opasek + kalhoty + krytí bot Rozměry balení (Š x V x H): 30 x 40 x 4 cm Obsah balení 1x karnevalový kostým na motivy Lovčího
1/72 AJ-37 Viggen Cockpit Set. For the new 1/72 Viggen kit as produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, the new resin parts directly replace the original styrene ones, no surgery required at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/72 AJ-37 Viggen Cockpit Set. For the new 1/72 Viggen kit as produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, the new resin parts directly replace the original styrene ones, no surgery required at all. The master parts were designed and produced using our 3D technology. The set also contains a pre-painted photo-etched fret. Country of origin: Sweden / modern
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Halberstadt CI.II - Fabric Seat Belts - pre-cut (laser). Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale.
1/32 Halberstadt CI.II - Fabric Seat Belts - pre-cut (laser). Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale.
1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Gotha G.I / UWD - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Limited edition exclusive for Art Scale Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Albatros D.V / D.Va - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Textile seat belts designed for aircraft Albatros D.V / D.Va by Wingnut Wings. Belts are made from real microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/32 scale. HGW models SEATBELTS in 1:32 scale - this set is designed for Wingnut Wings kits textile sheeting, metallic buckles it is possible to make seat belts fully functional - un/buckle, un/fasten them made by special micro-textile foil set contains seat belts for 2 single-seater aeroplanes textile parts are prepared to using filters - it leads to darkening shades - and these are also waterproofedand resistant to normal nonaggresive modeller preparations photo-etched parts were developed in cooperation with Eduard company INSTRUCTIONS This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that eches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
1/32 Fokker E.I - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. contains micro-fabric and photo-etched highly detailed parts designed for great Fokker E.IV by Wingnut Wings belts are fully functional - modeler can leave them un/fastened made from printed micro-fabric material which behaves like a piece of rag textile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations photo-etched parts are developed in cooperation with Eduard company
1/32 Fokker E.IV - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. contains micro-fabric and photo-etched highly detailed parts designed for great Fokker E.IV by Wingnut Wings belts are fully functional - modeler can leave them un/fastened made from printed micro-fabric material which behaves like a piece of rag textile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations photo-etched parts are developed in cooperation with Eduard company
1/32 Fokker E.IV - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. contains micro-fabric and photo-etched highly detailed parts designed for great Fokker E.IV by Wingnut Wings belts are fully functional - modeler can leave them un/fastened made from printed micro-fabric material which behaves like a piece of rag textile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations photo-etched parts are developed in cooperation with Eduard company
1/32 Fokker E.I - Fabric Seat Belts - pre-cut (laser) Wingnut Wings. Accessory designed for vintage model aircraft by Wingnut Wings. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts and photo etched buckles suitable for large scale planes in 1/32 scale. contains micro-fabric and photo-etched highly detailed parts designed for great Fokker E.IV by Wingnut Wings belts are fully functional - modeler can leave them un/fastened made from printed micro-fabric material which behaves like a piece of rag textile parts are prepared for using filters and other agents (they are waterproof and resistant to common nonaggresive modeling preparations photo-etched parts are developed in cooperation with Eduard company
1/72 P-40 - Undercarriage Set (contains wheel well structure and canvas covers). Pro nové modely P-40 verzí E, K, M a N od Special Hobby, ale nejen pro ně je určena sada odlitků hlavních podvozkových šachet. Sada nabízí detailní šachty nezakryté s naznačenou konstrukcí křídla, i v rozšířenější verzi se zakrytými dny a boky plátnem. Sada obsahuje i odlitek plátnem zakryté šachty ostruhového kola. PŘÍSLUŠNOST: USA / WWII
Dřevěná senzorická vkládačka Vilac Ice Touch & Feel Puzzle rozvíjí hravou formou smyslové vnímání, kdy nabízí dětem vkládání různě tvarovaných zvířátek do správných výřezů. Zvířátka nakreslila slavná dánská ilustrátorka Michelle Carlslund a pod každým dílkem se vždy ukrývá kousek látky s texturou podobnou pokrývce těla zobrazeného zvířátka. Díky tomu si děti mohou vytříbit nejen motorické, ale i hmatové dovednosti. Vkládání puzzlí navíc rozvíjí představivost, paměť a trpělivost, což jsou velice důležité vlastnosti, které vaše dítko využije na své cestě životem. Hračka navíc obdržela značku francouzské agentury ADEME, to znamená, že je vyráběna ekologicky. Šetří tedy životní prostředí, neznečišťuje půdu, vodu a vzduch a zbytečně se na ní neplýtvalo zdroji. Hlavní přednosti Dřevěná senzorická vkládačka Vilac Ice Touch & Feel Puzzle rozvíjí hravou formou smyslové vnímání, kdy nabízí dětem vkládání různě tvarovaných zvířátek do správných výřezů Pod každým dílkem se vždy ukrývá kousek látky s texturou podobnou pokrývce těla zobrazeného zvířátka, díky čemuž si děti vytříbí motorické i hmatové dovednosti Skládání / vkládání puzzlí dětem rozvíjí také dětskou představivost, paměť a trpělivost Nádhernou malbu obstarala dánská ilustrátorka Michelle Carlslund, která nakreslila 5 roztomilých zvířátek v zimním období Výrobky Vilac obdržely značku ADEME a jsou tedy šetrné k životnímu prostředí - neznečišťují půdu, vodu a vzduch a zbytečně neplýtvají zdroji Specifikace Značka: Vilac Model: Ice Touch and Feel Puzzle Modelové označení: V8503 Určení: senzorická vkládačka Doporučený věk: 1,5+ Fyzické vlastnosti Materiál: dřevo, látka Barva: mix barev Čistá hmotnost: 160 g Rozměry: 20 x 20 x 3 cm Obsah balení 1x dřevěná senzorická vkládačka Vilac Ice Touch & Feel Puzzle
1/72 P-40 - Undercarriage Set (contains wheel well structure and canvas covers). Pro nové modely P-40 verzí E, K, M a N od Special Hobby, ale nejen pro ně je určena sada odlitků hlavních podvozkových šachet. Sada nabízí detailní šachty nezakryté s naznačenou konstrukcí křídla, i v rozšířenější verzi se zakrytými dny a boky plátnem. Sada obsahuje i odlitek plátnem zakryté šachty ostruhového kola. PŘÍSLUŠNOST: USA / WWII